/ Office: 118 Nguyen Phi Khanh St, Tan Dinh Ward, District 1, Ho Chi Minh City, Vietnam.
Tel: (848) 3 820 6932 Fax: (848) 3 820 2055
Email: Website:
Factory: Lot A-3A-CN, My Phuoc 3 Industrial Zone, Ben Cat, BinhDuongProvince.

W8024SB SATIN DIY

/ Office: 118 Nguyen Phi Khanh St, Tan Dinh Ward, District 1, Ho Chi Minh City, Vietnam.
Tel: (848) 3 820 6932 Fax: (848) 3 820 2055
Email: Website:
Factory: Lot A-3A-CN, My Phuoc 3 Industrial Zone, Ben Cat, BinhDuongProvince.

PRODUCT INTRODUCTION

Description Rapid Single Component

Water-base Modified Polysiloxane Satin Top-coat.

Uses Furniture, Flooring and Paneling made from timber.

Application Brush, roller and scraper.

COATING PERFORMANCE

  • Self cross-linking, rapid curing
  • Outstanding scrub resistance
  • Outstanding water resistance
  • Excellent adhesion on timber substrates
  • Excellent resistance to UV irradiation
  • Excellent stain resistance
  • Excellent dirt pick-up resistance
  • Outstanding ability to high-light wood-grain pattern (for transparent coating)
  • Excellent fungus resistance

PHYSICAL AND CHEMICAL PROPERTIES

Specific Gravity at

27 (oC)1.00 – 1.06

Solid Content (%)30 – 34

Viscosity ( at 27 oC )40 – 50 sec F #4 Cup

Binder TypeModified Polysiloxane

PRODUCT PREPARATION

Mixing RatioReady for use. No thinning required.

APPLICATION PARAMETER

Theoretical Coverage

(m2/L)10 – 16 (subject to substrate porosity).

Coating System1-2 coats of W8038SLB Sanding Sealer DIY sanded, followed by 2 to 3 coats of W8024SB Satin DIY.

Application temperature18 oC - 50 oC

Touch-dry Time (27 oC)30 minutes

Hard-dry Time (at 27oC)1 hour.

GENERAL PROPERTIES

W8024SB Satin DIY is a water-based rapid single component Modified Polysiloxane Top-coat formulated specially for application on timber substrate via brush, roller and scraper application. This product is designed for self cross-linking to provide a rapid curing, hard and durable coating with excellent scrub, UV, stain, water, fungus and dirt pick-up resistance. This product is free of formaldehyde and being water-based, is non-flammable.

W8024SB Satin DIY is available in transparent water-clear, transparent stain as well as solid (opaque) colouration.

SHELF LIFE

12 months from date of manufacture. The date refers to product held in its original closed packaging.

STORAGE

Keep containers in a cool ventilated environment, temperature between 5 oC to 40 oC. With partial use, close container tight and use the remainder as soon as possible.

/ Office: 118 Nguyen Phi Khanh St, Tan Dinh Ward, District 1, Ho Chi Minh City, Vietnam.
Tel: (848) 3 820 6932 Fax: (848) 3 820 2055
Email: Website:
Factory: Lot A-3A-CN, My Phuoc 3 Industrial Zone, Ben Cat, BinhDuongProvince.

W8024SB SATIN DIY

Advance water-based wood lacquer

Biochem International J.S. Company

Office: 118 Nguyen Phi Khanh, Tan Dinh Ward, Dist.1

Tel: (84-8)3 8206 932 / 8207 927 Fax: (84-4)3 820 2055

Email: Website:

Technical Data Sheets (TDS)October 2009

Advance Water-based Wood LacquerPage:1

Biochem International J.S. Company

Office: 118 Nguyen Phi Khanh, Tan Dinh Ward, Dist.1

Tel: (84-8)3 8206 932 / 8207 927 Fax: (84-4)3 820 2055

Email: Website:

FILM PROPERTIES

Property / Results
Touch-dry / 30 minutes
Hard-dry / 1 hour
Adhesion / 100 mm2. No Detachment.
Flexibility / 2mmMandrel.
Impact / 45cm
Hardness / 2-3H (Without Part B)
Hardness / 3-4H (With Part B)

CONTROLLED MATERIALS IN

WET PAINT

Harmful Chemicals / *Level
Aromatic Hydrocarbon / 0 mg/kg
Halogenated Compound / 0 mg/kg
Formaldehyde / 0 mg/kg
Mercury / 0 mg/kg
Lead / 0 mg/kg
Cadmium / 0 mg/kg
Chromium / 0 mg/kg
Total Volatile Organic Content (TVOC) /  150 g/L

* These chemicals are not used in the manufacture of our product. However, minute traces may be present due to environmental contamination beyond our control.

COMMENT

Tests were performed on paint films applied at 100 wet film and allowed to cure at 27 2oC for 7 days. Relative Humidity was maintained at 80% during the period of film curing.

The information in this brochure has been compiled in accordance to our best knowledge at the date of

issue and is based on recent technological and scientific developments.

However, this information should not be construed into recommending the use of our product in violation of any patent or as warranties (express or implied) of non-infringement or its fitness for any particular purpose.

Prospective purchasers are invited to conduct their own tests and studies to determine the fitness *Biochem products for their particular purposes and specific applications.

Due to the varying techniques and conditions applied, Biochem accepts no responsibility for any use of the product, may be by way of experiment or manufacture nor does Biochem accepts any responsibility for the used techniques in any application whatsoever. Biochem does not warrant against infringement of patents of third parties by reason of any uses purchasers make of the product.

*Biochem : Biochem International J.S. Company

Technical Data Sheets (TDS)October 2009

Advance Water-based Wood LacquerPage:1