FORTUNE MATERIAL LIMITED
Room 510, No. 1165, Jiangning Road, 200060, Shanghai
TEL: +86-21 6180 0051 FAX: +86-21 6130 3552 EXT 6601
Austenitic Stainless Steel
These are chromium and nickel containing stainless steels with very low carbon content. They are non-magnetic, but can become slightly magnetic when cold worked. Cold working also enhances their strength. Austenitic Stainless Steels have excellent corrosion resistance; good formability; good weldability, and excellent mechanical properties over a wide range of temperatures. In addition, these steel are easy to clean, which enhances their use in applications in hygienic and sterile environments.
Typical application for the various grades include:
304/304L Tanks, storage vessels and pipe work for corrosive liquids. Process equipment in the mining, chemical, cryogenic, food, beverage and pharmaceutical industries. These stainless steels are also used for manufacturing holloware, cutlery, architectural products and sinks.
309/310 These grades have a higher chrome and nickel content that the 304 grade. As a result of their high oxidation resistance, these steels are used for high temperature applications such as furnace, kiln and catalytic converter components.
318/316L Tanks, pressure vessels, pipe work and components for more aggressive conditions and specialised applications, such as the manufacture of tank containers for bulk transportation of chemicals and corrosive liquids. The molydenum content enhances the corrosion resistance.
321/316Ti These are the "stabilised" grades. They are resistant to sensitisation and thus the possibility of Intergranular Corrosion. In addition they are used in components, which require elevated temperature strength and corrosion resistance, such as afterburners, super heaters, compensators and expansion bellows.
Ferritic Stainless Steels
Ferritic Stainless Steel are plain chromium stainless steels, usually with a low carbon content. They are magnetic and have good ductility and resistance to corrosion and oxidation. They are generally resistant to stress corrosion cracking. However, there are weldability limitations which restrict their use to thinner guages. 3CR12 is a special grade, developed and patented by Columbus Stainless which largely overcome this problem.
Typical applications for the different grades include :
409
Automotive exhaust tubing and catalytic convertor casings
430
Kitchen sinks, washtroughs, cutlery, kitchen and catering equipment and utensils.
1.4509 (441)
This grade is specially produced by Columbus Stainless for used in automotive components. Its superior mechanical strength at elevated temperatures (up to 850 deg C) makes it the ideal material for the front end (close to the engine) of an exhaust system. It can also be used for fabrication of heat exchanger tubes.
AISI 444
AISI Grade 444 has a very similar PRE (Pitting Resistance Equivalent) to Grade 316, meaning that its corrosion resistance is similar in aggressive outdoor environments, e.g. at the coast. Grade 444 tubing can be polished, bent and welded by conventional methods and tubing will be marked clearly on the inside of the tube. PRE is defined as %Cr + (3.3%Mo) + (16%N) which gives an indication of the steels resistance to pitting corrosion.
3CR12
This is a price competitive, corrosion resisting, weldable, utility ferritic stainless steel with particular advantages in wet abrasive applications. Unlike other ferritic stainless steels it can be welded in thicknesses of up to 30mm. It is extremely used in the mining, materials handling and sugar industries due to its resistance to atmospheric corrosion and wet abrasive corrosion.