How To WG5260 work with OCS2007
Role：Mediation Server, OCS2007 Server, WG5260 V6.2 Trunk, OCS Client。
Connections：
E1 PRI <-> WG5260 Trunk <-> Mediation Server <-> OCS2007 Server
Mediation Servers setting：
[Next Hoop Connections] Tab > [PSTN Gateway next hop] input Trunk IP and port
Mediation servers specify DNS server as OCS2007’s IP address then restart Mediation Server.
WG5260 Trunk setting：
[Configuration] > [SIP] > [Advance]
Please follow by these setting
TCP Enable：Yes
Outbound Use TCP：Yes
TCP Port：5060
[Configuration] > [SIP]
Please follow by these setting
Local Codec 3：G.711A
Local Codec 4：G.711Mu
183 SDP：Yes
RFC 2833 Payload Type：101
[Configuration] > [ Digit Manipulation] >
Please follow by these setting
[New] > Group ID：0, Description：OCS
> [Apply]
Click [Group ID 0] > [Detail] > [New] >
Matched Pattern：1, Insert：+
Matched Pattern：2, Insert：+, and so on.
[Control] > [Call Flow Editor]
Please follow by these setting
PSTN To：1007 [DM]
SIP To：1004 [Makecall]
[DM]1007：DM Parameter = DNIS, DM Group ID = OCS
[Makecall]1003：Route Mode = TA,
Transport Address = sip:192.168.19.57(Your Mediation Server IP)
[Makecall]1004：Route Mode = PSTN
Click [Control] > [System] > [Soft Reset]
OCS Communicator Client setting：
Open %windir%\system32\drivers\etc¥host
Add these
192.168.19.56 ocs2007.msft.com
192.168.19.56 ocs2007
192.168.19.56 msft.com
(If you want use manual configuration, otherwise please auto configuration and specify DNS server to OCS2007 IP Address)
Click [Advance]
Ocs2007 is the OCS2007’s pool name(Against TCP method, your OCS2007 need
Add TCP Port：5060, If use TLS you need import the OCS2007 provide Certificate, Auto configuration default use TLS)
OCS2007 Server user setting：
Run [Active Directory users and computers] > Create a new user
Click [Configure…]
Select [Enable Enterprise Voice]
Line URI：tel:+8001 (follow the format and number)
Example：rod as +8001 and dial 0282265699 to PSTN or dial +8002 to Daniel as +8002.
PSTN call could go through Trunk to Mediation Server / OCS2007.