Required Special Inspections and Testing

1. Soils
A. Foundation Bearing / Y / N
B. Slab Sub-base / Y / N
C. Exterior Fill / Y / N
2. Special Foundations
A. Pile Foundations (including mini-piles) / Y / N
B. Pier Foundations (including augered caissons) / Y / N
3. Concrete
A. Cast-In-Place Footings, Foundation Walls1, Foundation Piers / Y / N
B. Cast-In-Place Slabs-on-Grade and Slabs on Metal Deck / Y / N
C. Cast-In-Place Beams, Columns, Structural Slabs, Walls / Y / N
D. Post-Tensioned Cast-In-Place Elements / Y / N
E. Precast Structural Elements / Y / N
4. Masonry
A. Nonessential Facilities (Level 1 Inspection) / Y / N
B. Essential Facilities (Level 2 Inspection) / Y / N
5. Metals
A. Structural Steel / Y / N
B. Open-Web Steel Joists / Y / N
C. Metal Decking / Y / N
6. Wood
A. Structural Studs, Joists, Rafters, Columns, Shear Walls / Y / N
B. Engineered Wood Components / Y / N
7. Sprayed Fire-Resistant Materials / Y / N
8. Mastic and Intumescent Fire-resistant Coatings / Y / N
9. Exterior Insulation and Finish Systems (EIFS) / Y / N
10. Smoke Control / Y / N
11. Fabricated Systems / Y / N
12. Special Cases
A. Seismic-Force-Resisting / Y / N
B. Wind-Force-Resisting
/ Y / N

Identification of Seismic-Force-Resisting Systems and Wind-Force-Resisting Systems

The Registered Professional in Responsible Charge shall check off each of the systems or components included in the contract documents prior to issuing this form to the Contractor.

Seismic-Force-Resisting Systems:

The Seismic Design Category (SDC) is /B/C/D/E/F.

There /arenot seismic-force-resisting systems.

There /are not designated seismic systems.

Additional items for SDC C, D, E or F:

HVAC ducts with hazardous materials.

Piping / mechanical units w/ flammable, combustible or highly toxic materials.

Electrical equipment used for emergency or standby power systems.

Additional items for SDC D, E or F.:

Exterior wall panels.

Suspended ceiling systems.

Access floors.

Steel storage racks.

Additional item for SDC E or F:

Electrical equipment.

Wind-Force-Resisting Systems:

Wind Cat B, wind speed min 120MPH.

Wind Cat C or D, wind speed min 110MPH.

Design includes wind-force-resisting systems and components:

Roof cladding, framing connections.

Wall /roof / floor connections and framing.

Roof and floor diaphragm systems.

Vertical systems, braced or moment frames, shear walls.

Connections to foundation.

Impact resistant items.