WRSeriesWall-Mounted Remote Control November 2011
Putaudio controlin the room or area where needed
Architect & Engineering Specs
WR-1
The wall-remote shall provide two discrete DC remote level controls to be used for inputs oroutputs. Above each rotary control knob shall be a pocket in the mylar overlay for a paper function label to be inserted. The wall-remote shall connect to the host unit using four-conductor wire. The wall-remote shall mount into a standard North Americansingle-gang electrical box. A Decora™ cover plate (not included) shall be separately purchased at hardware stores to cover the wall-remote electrical box andsatisfy the aesthetic needs of the installation.
The wall-remote shall be the Ashly WR-1
WR-1.5
The wall-remote shall provide a single discrete DC remote level control to be used for inputs or outputs, and the wall-remote shall provide a four position rotary switchfor independent control of level and preset recall. Above each control knob shall be a pocket in the mylar overlay for a paper function label to be inserted. The wall-remote shall connect to the same host unit or two different host units. The wall-remote shall mount into a standard North American single-gang electrical box. A Decora™ cover plate (not included) shall be separately purchased at hardware stores to cover the wall-remote electrical box andsatisfy the aesthetic needs of the installation.
The wall-remote shall be the Ashly WR-1.5
WR-2
The wall-remote shall provide push-button Preset Recall for up to four (4) presets. Next to each button shall be a pocket in the mylar overlay for a paper function label to be inserted. The wall-remote shall connect to the host unit using five-conductor wire. The wall-remote shall mount into a standard North Americansingle-gang electrical box. A Decora™ cover plate (not included) shall be separately purchased at hardware stores to cover the wall-remote electrical box andsatisfy the aesthetic needs of the installation.
The wall-remote shall be the Ashly WR-2
WR-5
The wall-remote shall provide six (6) programmable function buttons with green LEDs to display status. Next to each function buttonshall be a pocket in the mylar overlay for a paper functionlabel to be inserted. The wall-remote shall have two other buttons to be used to adjust functionparameters such as gain or preset number as indicated byan LED display. The wall-remote shall connect to the host unit using four-conductor wire. The wall-remote shall mount into a standard North American single-gang electrical box. A Decora™ cover plate (not included) shall be separately purchased at hardware stores to cover the wall-remote electrical box andsatisfy the aesthetic needs of the installation.
The wall-remote shall be the Ashly WR-5
neWR-5
The wall-remote shall provide six (6) programmable function buttons which can light up green, red, or amber to display status. Next to each function button shall be a pocket in the mylar overlay for a paper function label to be inserted. The wall-remote shall have two other buttons to be used to adjust function parameters such as gain or preset numberas indicated by an LED display. A hard-wired Lock-Out feature shall be on the wall-remote, where the closing of a switch wired to the lockout euroblock renders allbuttons inactive. The wall-remote shall connect to the host unit using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or inline PoE injector. The wall-remote shall mount into a standard North American single-gang electrical box. A Decora™ cover plate (not included) shall be separately purchased at hardware stores to cover the wall-remote electrical box and
satisfy the aesthetic needs of the installation.
The wall-remote shall be the Ashly neWR-5
Visit to download ProteaNEsoftware and data sheets
Ashly Audio, Inc 847 Holt Road Webster, New York USA 14580-9103 800-828-6308, +1-585-872-0010 WR A&E_Nov 2011.pdf