TUBEHYDRO 2009 (2009, 9, 6-9)

Program at a glance

Date
Time / September 6
(Sunday) / September 7
(Monday) / September 8
(Tuesday) / September 9
(Wednesday)
Morning (8:50-12:00) / Opening ceremony / TA1 / TB1 / Technical tours (China Steel Corporation)
Plenary session
TA2 / TB2
Break (12:00-13:30) / Lunch / Lunch / Lunch
Afternoon (1:30-17:30) / M1 / TA3 / TB3 / Culture excursion (Kaohsiung harbor cruise and Chai Mountain safari)
Registration / M2
Evening (18:00-21:00) / Welcome reception / Dinner / Banquet / Farewell party

Final program

Sunday, September 6, 2009

16:00 -20:00, Registration

At Sunset beach resort

18:00 -21:00, Welcome reception

At Sunset beach resort

Monday, September 7, 2009

7:50 -17:00, Registration

At Info-Library Building 11F

8:50 -9:00 Opening ceremony

At Info-Library Building 11F, Conference Hall

9:00-12:10 Plenary session

At Conference Hall, Chairmen: F. K. Chen, K. Manabe

9:00- 9:40 (P1) The State Of The Art in Hydroforming Technology in Japan, Dr. A. Tomizawa (Japan)

9:40-10:20 (P2) Fundamentals, Innovations and Applications of Tube Hydroforming Processes in China, Prof. S. Yuan (China)

10:20-10:50 Coffee break

10:50-11:30 (P3) Development and Applications of Hydroforming in Taiwan, Dr. C.C. Chung (Taiwan)

11:30-12:10 (P4) Stress-Based Forming Limit Criterion for Tube Hydroforming, Prof. T. Kuwabara (Japan)

12:10-13:30 Lunch

13:30-15:20, September 7, 2009

M1: Formability of tube hydroforming (I)

At room 1107, Chairmen: S.H. Zhang, Y.S. Kim

13:30-14:00 (22)# Experimental Study on Warm Hydroforming for T-shape Joint of AZ31 Magnesium Alloy, K. Manabe*, K. Fujita, K.Tada (Japan)

14:00-14:20 (4) The Development of a Nonsymmetrical Shape and Large Variation-cross Section Tube by Hydroforming, L.X. Fan*, W.X Xin, G.H. Li (China)

14:20-14:40 (5) Research and Development of 600MPa Grade High Strength Thin-walled TRIP Steel Tube for Tube Hydro-forming, F.X. Zhu, Z.C. Zhang, L.Q. Chen*, K. Manabe, J.L. XUE (China)

14:40-15:00 (18) Formability Evaluation of AZ31 Tube under Elevated Temperatures, T. Kuwabara*, K. Takada (Japan)

15:00-15:20 (19) Evaluation of Fracture Property of Tube by Tensile Test Using Image Analysis, Y. Yoshida*, N. Yukawa, T. Ishikawa, K. Manabe (Japan)

15:20-15:40 coffee break

15:40-17:30 September 7, 2009

M2: Formability of tube hydroforming (II)

At room 1107, Chairmen: S. Fuchizawa, P.K. Cheng

15:40-16:10 (29)# Analysis of Forming Limit in Tube Hydroforming Process, J.G. Park and Y.S. Kim* (Korea)

16:10-16:30 (23) Effect of Axial Tension and Mandrel on Working Property of Draw Bending for Extruded Aluminum Square Tube, Y. Okude, S. Sakaki, S. Yoshihara* (Japan)

16:30-16:50 (25) Evaluation of Hydroformability of TRIP Steel Tubes by Flaring Test, Z.C. Zhang*, K. Manabe , F.X. Zhu, M. A. Mirzai, T.H. Li (Japan)

16:50-17:10 (32) Formability Study of Magnesium Alloy Tubes in Warm Hydraulic Bulge Tests, Y.M. Hwang, H. C. Chuang, K.H. Wang* (Taiwan)

17:10-17:30 (2) Crash Investigation of Side Intrusion Beam during High and Low Pressure Tube Hydroforming of TRIP Steel, C. Nikhare*, M. Weiss, P. D. Hodgson (Australia)

Tuesday, September 8, 2009

8:50-10:20, September 8, 2009

TA1: Experimental/Theoretical results of tube hydroforming

At room 1107, Chairmen: C.H. Hung, Y. Yoshida

8:50-9:20 (39)# A Finite Element Analysis of T-shaped Tube Hydroforming Process, F.K. Chen*, R.H. Lin (Taiwan)

9:20-9:40 (15) Cross-shaped Tube Hydroforming of Small Diameter Tubes, A. Shirayori*, M. Narazaki (Japan)

9:40-10:00 (30) The Optimization of the Shape through Hydroforming for Improving Durability of CTBA Torsion Beam, K.S. Kim*, K.S. Jin, Y.G. Kim, S.M. Na, S. Namgung (Korea)

10:00-10:20 (41) Study on the Influence of Process Parameters of Large T-Shape Tube Hydroforming on the Corner Radius at Protrusion End with Finite Element Method, C.T. Kwan*, W.C. Lee (Taiwan)

10:20-10:40 Coffee break

10:40-12:10, September 8, 2009

TA2: Numerical simulation of tube hydroforming

At room 1107, Chairmen: G. Ngaile, C.T. Kwan

10:40-11:10 (16)# Effects of Draw Bending Conditions of Tube on Deformation of the Bend during the Subsequent Hydroforming Process, K. Ishigaki*, N. Sakaguchi , N. Kaneda, M. Kojima (Japan)

11:10-11:30 (13) Development of Hydroformed Rear Twist Beam for Light Commercial Vehicles, S Ali*, S. Kumar, R. Natarajan (India)

11:30-11:50 (3) Finite Element Simulation and Experiment of Automobile Engine Cradle, H. Su, H. Jiang, S. Guan, X. Chen, P. Fan, B. Yang (China)

11:50-12:10 (44) Estimating the Effect of the Forming Parameters on Bellows Hydroforming Using Finite Element Method, S.Y. Lin*, C.Y. Tsai, J.C. Shih (Taiwan)

12:10-13:30 Lunch

13:30-15:40, September 8, 2009

TA3: Sheet hydroforming

At room 1107, Chairmen: T. Kuwabara, S.Y. Lin

13:30-14:00 (7)# Research on Mechanism of Formability Improvement in Pulsating Hydroforming of Tubes, S.H. Zhang* and A.Y. Yuan (China)

14:00-14:20 (33) Micro Bulging Processes of Copper Sheets Using Viscous Pressure Medium, C.C. Chang*, J.C. Lin (Taiwan)

14:20-14:40 (34) Investigation of Optimum Process Parameters on the Sheet Hydroforming of Stainless Steel / Aluminum Clad Metal for 3C Products, H.C. Tseng*, Z.C. Wu, C.H. Hung, M.H. Lee, C.C. Huang (Taiwan)

14:40-15:00 (40) Study on Hydraulic Deep Drawing of SPCC Sheets, T.F. Hwang*, X.X. Ke (Taiwan)

15:00-15:20 (21) Finite Element Analysis and Experimental Investigation on Circular Tube-Pure Bending, K. Takahashi*, T. Kubok , M. Murata (Japan)

15:20-15:40 (50) Parameter Identification of Elasto-Plastic Constitutive Models, Andreas Öchsner (Malaysia)

8:50-10:20, September 8, 2009

TB1: Hydrotribology, Hydropiercing and hydrojoining

At room 1106, Chairmen: R.S. Lee, S. Yoshihara

8:50-9:20 (45)# Analytical Models for the Characterization of the Guiding and Expansion Zone Tribotests for Tube Hydroforming, G. Ngaile* and C. Yang (USA)

9:20-9:40 (43) The Development of Hydroformed Rear Twist Beam for the Automotive Chassis, C.K. Chiu Huang*, P.K. Cheng, C.C. Lee, Y.T. Pan, and M.Y. Chang (Taiwan)

9:40-10:00 (17) Study on Outward Hydropiercing by Internal Hydraulic Pressure, M. Uchida*, A. Tomizawa (Japan)

10:00-10:20 (6) Research on Hydroforming Tubular Parts with Dissymmetrical Structure, J.F. Lin*, F. Li, S.J. Yuan , J.C. Han (China)

10:20-10:40 Coffee break

10:40-12:10, September 8, 2009

TB2: New processes of hydroforming (I)

At room 1106, Chairmen: A. Ochsner, A. Shirayori

10:40-11:10 (36)# Fracture Prediction in Complex Tube Hydroforming Process Using Fracture Energy Criterion, R.S. Lee*, Y.J. Chen, P.K. Cheng, C.K. Chiu Huang (Taiwan)

11:10-11:30 (11) Hydro Forming at Elevated Temperatures, R. Neugebauer, F. Schieck* (Germany)

11:30-11:50 (38) The Development of Chro-Moly Steel Bike Tube by Hydroforming Process, C.Y. Chuang, C.C. Lee, C.K. Chiu Huang, P.K. Cheng, C.S. Liu, Y.T. Pan (Taiwan)

11:50-12:10 (46) Tube Hydroforming with movable dies, K. Sato*, I. Hiroshige, K. Hiramatsu (Japan)

12:10-13:30 Lunch

13:30-16:00, September 8, 2009

TB3: New processes of hydroforming (II)

At room 1106, Chairmen: S. Yuan, F. Schieck

13:30-14:00 (28)# Analysis of Hot Air Forming Process Using Aluminum Tube, H.Y. Kim*, S.J. Yoon, G.D. Lee, T.J. Kim (Korea)

14:00-14:20 (27) Energy Efficiency Forming Technology for Tubular CTBA Using Hot Forming, Y.J. Zhang*, K.D. Lee, T.J. Kim, H.S. Son, Y.S. Kim (Korea)

14:20-14:40 (20) Experimental and Numerical Study on Dieless Drawing Process of Aluminum Alloy Extruded Tubes with Double Hollow Section, T. Furushima*, K. Manabe (Japan)

14:40-15:00 (49) The Finnish Hydroforming Project – Innovative Products and Laser Beam Manipulation on Tube Production, S. Kivivuori , M. P V. , T. Torvinen (Finland)

15:00-15:20 (37) The Development of Various Cross-Section Faucet by Tube Hydroforming Process, C.C. Lee, C.Y. Chuang, C.K. Chiu Huang, P.K. Cheng (Taiwan)

15:20-15:40 (48) Design and Fabrication of Micro Heat Spreader Using Micro Aluminum Alloy Tube Extrusion Process for Photoelectric Components, S.C. Shen*, J.C. Hsieh, C.T. Pan, H.J. Huang, H.J. Shaw (Taiwan)

15:40-16:00 (52) A new approach for hydroforming tubular components simulation with experimental study, Lin Wang*, G.D. Wang, L.C. Chan and T.C. Lee (Hong Kong)

#Keynote papers, *presenter of the paper