Products Or Products Family/Intended Use

Hellenic Accreditation System

Annex to C4/18the CertificateNo. 53-5
SCOPE of ACCREDITATION
of
European Inspection and Certification Company
(EUROCERT)S.A.
as a Type A Inspection Body,
in line with E.C Directives

Products or products family/Intended use

/

Procedure /Type of inspection

/

Modules or Annexes of Directives/Standards/ Normative Regulations / In house procedures

Lifts
1.Electric lifts
2. Hydraulic lifts / -EU type –examination
-Final inspection
-Conformity based on unit Verification / Directive 2014/33/EU
J.M.D 39507/167/F.9.2(G.G 1047/Β/13-04-2016)
-Annex IVB
-Annex V
-Annex VIII
-ELOT EN 81-20:2014
-ELOT EN 81-50:2014
-ELOT EN 13015:2001+A1:2008
Safety components for lifts
1.Electric lifts
2. Hydraulic lifts / -EU type –examination
-Conformity to type with
random checking / Directive 2014/33/EU
J.M.D 39507/167/F.9.2 (G.G 1047/Β/13-04-2016)
-Annex IVA
-Annex IX
-ELOT EN 81-20:2014
-ELOT EN 81-50:2014
Simple pressure vessels / - EU-Type Examination
(Module B)
- Conformity to type based on internal production control plus supervised vessel testing
(Module C1)
- Conformity to type based on internal production control plus supervised vessel checks at random intervals (Module C2)
- Conformity to type based on internal production control (Module C) / Directive 2014/29/EU
M.D. Oik. 46248/DTVN 1008/2016
(G.G. 1339/B/2016)
AnnexΙΙ, Paragraph 1
AnnexΙΙ, Paragraph 2.3
AnnexΙΙ, Paragraph 3.3
AnnexΙΙ, Paragraph 4
-ELOT EN 286-1: 1998+A2:2005
Pressure equipment
Groups – Subgroups** / Internal Production Control plus Supervised Pressure Equipment Checks at Random Intervals
EU-TypeExamination - production type
EU-TypeExamination - design type
Conformity to Type based on Internal Production Control plus Supervised Pressure Equipment Checks at Random Intervals
Conformity to Type based on Pressure Equipment Verification
Conformity based on Unit Verification / Directive 2014/68/EU,
M.D. oik. 74124/DTVN 1431/2016,
(G.G. 2278/Β/2016)
AnnexΙΙΙ, ModuleΑ2
AnnexIII, paragraph 3.1, ModuleB
AnnexIII, paragraph 3.2, ModuleB
Annex III, paragraph 4, ModuleC2
AnnexΙΙΙ, paragraph 9, Module F
AnnexΙΙΙ, paragraph 10, Module G
1. Unfired pressure vessels
Category 1
Subgroup: 1.1.2, .1.1.3 / ΕLΟΤ ΕΝ 13445-1: 2014+A1:2014,
ΕLΟΤ ΕΝ 13445-2: 2014+A1:2014,
ΕLΟΤΕΝ 13445-3:2009/A1:2012/A2:2013,
ΕLΟΤ ΕΝ 13445-4: 2014+A1:2016,
ΕLΟΤ ΕΝ13445-5:2014,
ΕLΟΤ ΕΝ 13445-6:2014+A1:2015,
ΕLΟΤ ΕΝ 13445-8: 2014+A1:2014
2. Shell boilers
Category 1
Subgroup: 1.2.2, .1.2.3 / ΕLΟΤ ΕΝ 12953-1:2012,
ΕLΟΤ ΕΝ 12953-2:2012,
ΕLΟΤ ΕΝ 12953-3: 2016,
ΕLΟΤ ΕΝ 12953-4:2002,
ΕLΟΤ ΕΝ 12953-5:2002,
ΕLΟΤ ΕΝ 12953-6:2011,
ΕLΟΤ ΕΝ 12953-7:2002,
ΕLΟΤ ΕΝ 12953-8:2001/AC:2002/AC:2002,
ΕLΟΤ ΕΝ 12953-9:2007,
3. Water tube boilers
Category 1
Subgroup: 1.2.2, .1.2.3 / ΕLΟΤ ΕΝ 12952-1: 2015,
ΕLΟΤ ΕΝ 12952-2:2011,
ΕLΟΤ ΕΝ 12952-3:2011,
ΕLΟΤ ΕΝ 12952-5:2011,
ΕLΟΤ ΕΝ 12952-6:2011,
ΕLΟΤ ΕΝ 12952-7:2012,
ΕLΟΤ ΕΝ 12952-8:2002,
ΕLΟΤ ΕΝ 12952-9:2002,
ΕLΟΤ ΕΝ 12952-10:2002,
ΕLΟΤ ΕΝ 12952-11:2007,
ΕLΟΤ ΕΝ 12952-14:2004,
4. Metallic industrial piping
Category 1
Subgroup:1.3.1,1.3.2,1.3.3 / ΕLΟΤ ΕΝ 13480-1:2012,
ΕLΟΤ ΕΝ 13480-2:2012/A1:2013+A2:2016,
ΕLΟΤ ΕΝ 13480-3:2012,
ΕLΟΤ ΕΝ 13480-4:2012/A1:2013+A3:2016,
ΕLΟΤ ΕΝ 13480-5: 2017,
5. Industrial process control valves
Category 1
Subgroup:1.4.2,1.4.3 / -ELOT ΕΝ 1349:2009
6. Industrial valves -Valves for chemical
and petrochemical process industry
Category 1
Subgroup:1.4.2,1.4.3 / -ELOT ΕΝ 12569:2012*
Pressure equipment
1.Permanent joints / -Approval of methods for permanent joints. / Directive 2014/68/EU,
M.D. oik. 74124/DTVN 1431/2016,
(G.G. 2278/Β/2016)
Annex Ι, paragraph 3, section 3.1.2
-ELOT EN ISO 15614-1:2017
-ELOT EN ISO 15614-2:2005/AC:2009
-ELOT EN ISO 15607:2009*
-ELOT EN ISO 15609-1:2004*
-Approval testing of welders / Annex Ι, paragraph 3, section 3.1.2
-ELOT ΕΝ 287-1:2011
-ELOT ΕΝ 287-2:1992*
-ELOT EN ISO 9606-1:2017
-ELOT EN ISO 9606-2:2004
Transportable pressure equipment:
tanks, battery vehicles/wagons, multiple-element gas containers (MEGCs), their valves and other accessories when appropriate, as covered in Chapter 6.8 of the Annexes to Directive 2008/68/EC
1. Transportable refilled welded steel
LPG cylinders
2. Welded steel LPG tanks
3. Transportable gas cylinders.
4. Welded steel gas cylinders
5. Pressure receptacles including gas
cartridges, their valve and other
accessories , when appropriate
6. Non-refillable metallic gas cartridges
for liquefied petroleum gases, with or
without a valve, for use with portable
appliances - Construction, inspection,
testing and marking
7. Open and Closed cryogenic
receptacles and vessels / -Conformityassessment
-Exceptional checks
-Intermediate inspections
-Periodic Inspections
-Reassessment of Conformity / Directive 2010/35/ΕU
J.M.D. 12436/706/5-9-2011
(G.G. 2039/Β/13-9-2011)
Section I.1 of Annex I,
Section II.1 of Annex II
Section III.3 of Annex III, to
Directive 2008/68/EC
J.M.D 40955/4862/30-09-2013
(G.G 2514/B/07-10-2013)
-Annex III to Directive 2010/35/EE
EUROCERT Procedure DP 13.29
-ΕLΟΤΕΝ 12252, ΕLΟΤΕΝ 1442+Α1,
-ELOT EN 1439, ELOT EN 1440
-ELOT EN 14140, ELOT EN 14192
-ΕLΟΤΕΝ 1800, ΕLΟΤΕΝ 1964.03, ΕLΟΤΕΝ 1975, ΕLΟΤΕΝISO 11120, ΕLΟΤΕΝ 12862, ΕLΟΤΕΝ 12807 Ε2, ΕLΟΤΕΝ 13322
-ΕLΟΤ ΕΝ 13322+A1
-ΕLΟΤ ΕΝ 12493, ΕLΟΤ ΕΝ 14893,ΕLΟΤ ΕΝ 849/Α2, ΕLΟΤ ΕΝ ISO 10297,ELΟΤ ΕΝ 13153
-ELOT EN 417:2012
-ΕLΟΤ ΕΝ 13530, ΕLΟΤ ΕΝ 1251
-ΕLΟΤ ΕΝ 14398
-ΕLΟΤ ΕΝ 1626,
-ΕLΟΤ ΕΝ 13648, ΕLΟΤ ΕΝ ISO 21029
Machines
1. Vehicle servicing Lifts
2. Devices for the lifting of persons or of
persons and goods involving a
hazard of failing from a
vertical height of more than 3 m. / «EC» type-examination / Directive 2006/42
Annex IX, art.12, par.3(b) and par.4(a)
-ELOT EN 1570:1998 +A2:2009
-ELOT EN 14010:2003 +A1:2009
-ELOT EN 1493:1999+Α1:2008
Safety on the Community Railways
Risk evaluation and assessment according to the common safety method (CSM) / Assessment of the Reisk Management System by CSM for subsystems:

• Infrastructure
• Energy
• Control command and signalling
• Rolling stock

And for:

• Maintenance of rolling stock and infrastructure
• Operational management

/ Commission Implementing Regulation (EU) No 402/2013 on the common safety method for risk evaluation and assessment and repealing regulation (EC) No 352/2009 Annex II
Commission Implementing Regulation (EU) No 2015/1136 of 13 amending Implementing Regulation (EU) No 402/2013 on the common safety method for risk evaluation and assessment.
EUROCERT QUALITY PROCEDURE DP.13.82

*The reference to non harmonized European Standards, Regulations or Normative documents indicates that only a specific part of the requirements of the above European Standards, Regulations or Normative documents, complement, either the harmonized European Standards EN, which fulfil essential requirements of European Directives, or the provisions of European Directives, to the degree that is necessary for the assessment of the compliance of the product.

**Grouping according toESYD_ KO-PED/01/01/21-07-2016.

Address of Body head offices 89Chlois & Likovrisis, 144 52 Metamorfosi , Greece

Approved Signatory: Georgios Briskolas

This Scope of Accreditation replaces the previous one dated 19.04.2018.

The Accreditation Certificate No. 53-5,according to ELOT EN ISO/IEC 17020:2012, is valid until29.11.2021.

Athens, 17.05.2018

Konstantinos Voutsinas

Managing Director, ESYD

Page1of10 Annex to C4/18 to the Certificate ESYD No.53-5 17.05.2018