Price/Proposal No. 65– Disk Dated 5-01-2011 Prices and specifications subject to change without notice.
PB2743S & PA2743
STANDARD SPARTAN MODEL PB 2743S HEAVY DUTY DUAL POST, TWO WAY SWIVELING HORIZONTAL, METAL CUTTING BANDSAW WITH 10 H.P. 2” BLADE, AND UP TO 60 DEGREE MITERING
Capacity: 90 DEGREES; 27.5” x 43” ( 700 x 1100mm) 28” Round (715mm),
45 DEGREES; 26.75” x 27.5” (680 x 700mm) 26.75” Round (680mm)
60 DEGREES; 18.875” x 27.5” (480x700mm) 18.875” Round (480mm)
Blade: 2” x 31’ 6” x .063” (54 x 9600 x 1.6mm)
Saw Frame: The saw frame is canted at a 8 degree angle for faster cutting of structural and other flat materials. The saw base is Swivels to 45 Degrees one direction and 60 Degrees the other, for miter cutting. A ½ hp (400 W.) motor turns the machine base and the degree of angle is read out on a LED DISPLAY. The Heavy Duty Saw Frame rides up and down a Linear Way Guide System.
Blade Tension: Hydraulically controlled tension (35,000 psi) provides consistent square cutting accuracy. The Motion Detector will shut the machine off should a blade break or stall. Blade Wheel Diameter is 34.625” to provide maximum blade life.
Speed Range: 50-325 SPFM (15-100m/min.) infinitely variable through a frequency inverter system and a heavy duty Worm Gear Transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An Electric Tachometer assures accurate speed settings.
Hydraulic Down Feed: Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color coded dial allowing the operator to select the best setting for the type of material being cut.
Motors: Blade Drive: 10 H.P. (7.5 kW). Hydraulic Pump Motor: 3 H.P. (2.2 kW). Oil Mist Coolant System: 1/4 HP, (180W) Wire Brush Motor: 1/8 HP (90W), Table Rotation: 1/2 HP, (400W)
Blade Guides: A combination of roller bearing and hydraulically actuated carbide blade guides assures the blade is held taut for fast, accurate cuts.. The cast iron Movable Guide Arm is positioned through a Hydraulic Cylinder, then is Hydraulically Locked in position.
Chip Brush: An Independent Motor drives the Blade Brush to assure complete removal of chips from each gullet of the blade assuring optimum cutting performance and enhanced blade life.
Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Vise Jaws: Full Stroking Vise Jaws and a Vertical Clamp Devise assure the work piece is secure and eliminating excessive vibration during the cut providing better blade life and cleaner cuts. Minimum Clamping Capacity is 16.125” (410mm).
Controls: An Independent Electric Cabinet and Control Panel allow the operator to position the controls for optimum viewing of the cutting area. A PLC controls all electrical and hydraulic functions.
Machine Floor Space: 88 ½” H x 165 3/8” W x 74 5/8” D (2250Hx 4200Wx 1900Dmm)
Machine Wt.: 17,600 lbs (8000kg)
PB2743S & PA2743 – Page 2.
Other Standard Features:
Miter Cutting 45-0-60
34 5/8" Diameter Blade Wheels
Automatic Saw Frame Return
Laser cut line indicator
Independent Electrical Cabinet and Operator Control
Work Light
Powered Angle Setting w/LED Display
Independent Drive Blade Brush
Oil Mist Coolant System
Feed Pressure Compensation System
Infinitely Variable Blade Speed
Vertical Clamping Devise
Powered Moveable Guide Arm w/Lock
Hydraulically Actuated Carbide Blade Guides
Full Stroke Vise Jaws
8 Degree Canted Saw Frame
Coolant Flush Hose
One Parts and Operational Manual
One Saw Blade
Hydraulic capacity………………………………………………………….…………………………………….16 gals. (60L)
Table Height……………………………………………………………………………………………….…..…37in. (940mm)
Base Price……………………………………………………………………………………………..……….$ 119,175.00
Optional Equipment:
Out of Square Detector………………………………………………………………………………………$ 3,325.00
Laser Alignment Light………………………………………………………………………………………...$ 550.00
2 meter dead roller table……………………………………………………………………………………..$ 5,250.00
2 meter power roller table……………………………………………………………………………………$ 10,555.00
Automatic Series of the PB 2743S
PA2743/1 with 39” long (1 meter) Shuttle…………………………………………………………...……..$ 151,125.00
PA2743/1.5 with 58” long (1.5 meter) Shuttle…………………………………….……………………….$ 159,750.00
PA2743/3 with 117” long (3 meter) Shuttle………………………………………………………………...$ 170,530.00
Optional Equipment:
NC Controls in place of standard (PA Automatic versions only)…………………………………………$ 12,960.00
WARRANTY: Marvel Manufacturing Company, Inc. warrants to the original user for a period of (2) years on replacement parts and (1) year labor. We warrant from the date of factory shipment, that every new Spartan metal sawing machine is free from defect in material and workmanship. During that period, we will, at our option, repair or replace any part which, upon examination, we find defective. This warranty will not apply to alterations or modifications made upon Spartan Ironworkers without our written consent, or to machines which have been subject to willful abuse.
Prices: NET F.O.B. Factory. All prices contained herein are subject to change without notice and are further subject to an increase equal to the amount of any Federal, State, or Local Tax that may be imposed.
10% down payment is due with purchase order. A 35% restocking charge will be assessed for all cancelled orders.
PB2743S & PA2743 – Page 3.
Marvel Manufacturing Company, Inc. also reserves the right to make design changes and/or modifications on machines without prior notice.
No officer, employee, representative, or agent is authorized to bind the company to acceptance of any order in the field. All orders are subject to acceptance by the company at its home office in Oshkosh, Wisconsin. Delivery dates given are estimates only, based on prevailing conditions and available information, and are subject to conditions and contingencies beyond our control.
Marvel Manufacturing Company, Inc. • 3501 Marvel Drive • Oshkosh, WI 54902 • U.S.A.
Phone: (920) 236-7200 (800) 472-9464 Fax: (920) 236-4156
www.marvelsaws.com
Sales & Service Centers/Warehouses
OSHKOSH, WI • 1 800 472-9464 • FAX: 1 920 236-4156
FT. WORTH, TX • 1 817 535-2183 • FAX: 1 817 531-1163
LONGVIEW, WA • 1 360 575-9917 • FAX: 1 360 575-9706
BIRMINGHAM, AL • 1 205 916-2828 • FAX: 1 205 916-2827
District Sales Managers and Technical Specialists in Major Cities