Session 3 - Your First Design

18  POST PROCESS GERBER & DRILL DATA

18.1   LMB [MB – File/Save As]

18.2  

18.3   LMB [Select – File name: window]

18.4   Demo18.pcb

18.5  

18.6   LMB [Save]

18.7   RMB [Select – Find]

18.8  

18.9  

18.10   LMB [Scroll – Select – Via Type]

18.11   LMB [Select – Through]

18.12  

18.13   Note: There is no microvia in the Via Names window. Therefor the microvia is not being used on this design. We want to delete the microvia to remove it from the drill symbol list.

18.14   LMB [Select – OK]

18.15   LMB [MB – Setup/Pad Stacks…]

18.16  

18.17  

18.18   LMB [Select – Pad Stack Type – Via]

18.19  

18.20   LMB [Select – MICROVIA]

18.21   LMB [Select – Delete Via] (Only if the MicroVia was not used in the design)

18.22  

18.23  

18.24   LMB [Select – Yes]

18.25  

18.26   LMB [Select – OK]

18.27   LMB [MB – File/Cam…]

18.28  

18.29   LMB [Select – CAM Directory - DEMOA]

18.30  

18.31   LMB [Select – Document Name: scroll bar – Scroll to – PHOTO, DRILL DRAWING]

18.32  

18.33   LMB [Select – Edit]

18.34   LMB [Select – Customize Document – Options]

18.35  

18.36   LMB [Select – Drill Symbols…]

18.37  

18.38   LMB [Select – Regenerate]

18.39  

18.40  

18.41   LMB [Select – Yes]

18.42  

18.43   LMB [Select – OK]

18.44  

18.45   LMB [Select – OK]

18.46  

18.47   LMB [Select – OK]

18.48   LMB [Select – NC DRILL DATA]

18.49  

18.50   LMB [Select – Run]

18.51  

18.52   LMB [Select – Yes]

18.53   LMB [Select – Window – Start]

18.54  

18.55   LMB [Select – Programs]

18.56   LMB [Select – Accessories]

18.57   LMB [Select – WordPad]

18.58  

18.59   LMB [Select File/Open]

18.60  

18.61   LMB [Select – Look in: (click through directories) – C:\padspwr\Cam\Demoa]

18.62  

18.63   LMB [Select Files of type: - All Documents (*.*)]

18.64  

18.65   LMB [Select – DEMOANC.rep]

18.66  

18.67   LMB [Select – Open]

18.68  

18.69   LMB [Select – File/Print]

18.70  

18.71  

18.72   LMB [Select – OK]

18.73   LMB [Select – File/Exit]

18.74  

18.75   LMB [Select – Document Name: scroll bar – Scroll to – PHOTO, DRILL DRAWING]

18.76  

18.77   LMB [Select – Edit]

18.78  

18.79   LMB [Select – Customize Document – Options]

18.80  

18.81   LMB [Select – Drill Symbols…]

18.82  

18.83   LMB [Select – Size 20]

18.84   LMB [Select – Symbol Z]

18.85  

18.86   LMB [Select – Size 125]

18.87   LMB [Select – Symbol Y]

18.88  

18.89   LMB [Select – Size 37]

18.90   LMB [Select – Symbol X]

18.91  

18.92   LMB [Select – Size 47]

18.93   LMB [Select – Symbol W]

18.94  

18.95   LMB [Select – Size 125 (Nonplated)]

18.96   LMB [Select – Symbol V]

18.97  

18.98   LMB [Select – Size 14]

18.99   LMB [Select – Symbol +]

18.100  

18.101   LMB [Select – Size 20]

18.102   LMB [Select – Symbol X]

18.103  

18.104   LMB [Select – Size 37]

18.105   LMB [Select – Symbol Rectangle]

18.106  

18.107   LMB [Select – Size 47]

18.108   LMB [Select – Symbol Diamond]

18.109  

18.110   LMB [Select – Size 125]

18.111   LMB [Select – Symbol Hour Glass]

18.112  

18.113   LMB [Select – Size 125 (Nonplated)]

18.114   LMB [Select – Symbol Bow Tie]

18.115  

18.116   LMB [Select – OK]

18.117  

18.118   LMB [Select – Drill Symbols]

18.119  

18.121  

18.122   LMB [Select – OK]

18.123  

18.124   LMB [Select – OK]

18.125  

18.126   LMB [Select – Print Preview]

18.127   LMB CD [Select – Center of Drill Chart area and make a box around chart]

18.128  

18.129   LMB [Select – Close]

18.130  

18.131   LMB [Select – OK]

18.132   LMB [Select – PHOTO, LAYER 1(TOP)]

18.133   LMB [Select – Edit]

18.134  

18.135   LMB [Select – Device Setup]

18.136  

18.137   LMB [Select – Advanced]

18.138  

18.139   Verify or change to match this dialog box

18.140   LMB [Select – OK]

18.141  

18.142   LMB [Select – Regenerate]

18.143  

18.144   LMB [Select – Yes]

18.145  

18.146   Note Any time components are added or deleted this Photo Plotter Setup Regeneration must be repeated.

18.147   LMB [Select – OK]

18.148  

18.149   LMB [Select – OK]

18.150  

18.151  

18.152   LMB CD[Select – Document Names:

PHOTO, LAYER 1 (TOP)

PHOTO, LAYER 2 (PLANE)

PHOTO, LAYER 3 (PLANE)

PHOTO, LAYER 4 (BOTTOM)

PHOTO, SILKSCREEN (TOP))

PHOTO, SOLDER MASK (TOP)

PHOTO, SOLDER MASK (BOTTOM)

PHOTO, PASTE MASK (TOP)

PHOTO, DRILL DRAWING

PHOTO, ASSEMBLY (TOP

18.153  

18.154   LMB [Select – Run]

18.155   LMB [Select – Yes]

18.156  

18.157  

18.158   LMB [Select – Close]

18.159  

18.160   LMB [Select – Yes]

18.161   Home

18.162   ESC

18.163   LMB [MTB – Save]

18.164  

3.18.25

Rev. 2414 ©2002 AACUCAD~ 1011 Glacier Pkwy, Algonquin, IL 60102-5004 Voice (847) 854-6052 FAX (847) 854-6053