Pneumatic Rack & Pinion Actuators

Index

Pneumatic Rack & Pinion Actuators

General Overview

Features

Anti Blowout system and mounting variations

Mounting variations

Bi-directional travel stops

Parts List MOD63~MOD140

Construction Figure

Material of contraction

Parts List MOD160~MOD350

Construction Figure

Material of construction

Technical data

Actuator dimensions (Inch)

Dimension of MOD63~MOD140 Figure

Dimension of MOD63~MOD140 Form

Dimension of MOD160~MOD350 Figure

Dimension of MOD160~MOD350 Form

Actuator body drillings for solenoid mounting (Namur standard, mm/Inch)

Actuator top drillings for accessory mounting (Namur standard, mm/Inch )

Mounting flange dimension details (Inch)

Operation principle of double acting actuator

Double acting actuator torque output:

Operation principle of spring return actuator:

Spring Setting

Spring return actuator torque output MOD SR160 ~SR350

Spring return actuator torque output MOD SR240 ~SR350

Pneumatic Rack & Pinion Actuators

General Overview

Designed and manufactured for the ultimate in durability and reliability.

Pneumatic Rack & Pinion Actuators provide outstanding service life.

Compact Rack & Pinion Design utilizing the whole piston area develops output torque.
Quarter-Turn Operation
Designed for using on a variety of valve types: ball valves, butterfly valves, plug valves dampersetc.
Hard anodized aluminum body.
Chromate corrosion protection on all aluminum components.
Suitable for indoor and outdoor installation.
Adjustable travel double stops. 90 degrees +/- 5 degrees.
Double acting type torque outputs from 328 in-lbs. to 56552 in-lbs. with an 80psi air supply.
All moving parts are factory lubricated. No additional lubrication required.
Removable/replaceable drive inserts.
Pre-loaded spring assemblies.
ISO 5211 mounting.
NAMUR (VDI/VDE) accessory mounts.
Anti Blow-Out pinion design.
Maximum pressure rating: 116 psi.
Compatible media: clean, dry air, filtered noncorrosive gas or light hydraulic oil.
Mounting dimensions are Keystone standards and ISO standards for direct mounting capabilities.

Features

The hard-anodized actuator body along with the control modules is protected from corrosive environments with a protective finish that has passed a 1,000 hour-salt spray test per ASTM B117.
Die cast aluminum end caps with polyester powder coat finish. Using the same end caps on both SR and DA actuators allow customers to lower inventory costs and give quick interchangeability. Allowing customers to convert SR units to DA units by adding springs only.
Die casting aluminum piston. The precision-machined rack is chrome plated for optimal performance. It has a three point guiding system for moving stable and extended service life. High qualified seamless O-rings for airtight sealing and long service life.
Anti Blow out pinion design.
Superior stability and field safety spring package (sizes 63 through 140). The EM pneumatic actuator utilizes two embedded springs, an inner and outer springs allow five different spring torques. The design also allows equal and evenly distributed force to each piston extending service life.
The encapsulated spring packagewith corrosion-protected can be easily disassembled with a standard Allen wrench for conversion of double-acting to spring-return configuration on sizes 52 through 140.
Anti-friction housing guide band ensures no metal-to-metal contact and provides wear protection between housing and piston for extended service life. Ideal for modulating or on/off control applications.

Anti Blowout system and mounting variations

Mounting variations

Bi-directional travel stops

Adjustable stops on the center of the body provide the flexibility of accurate valve rotational positioning at the end of the ‘open’ and ‘close’ stroke.

The total travel of 100 degrees allows for end of travel adjustment of 5 degrees at both open and close positions.

Travel stops must not be used for manual override purposes.

Travel stops on actuators with reverse action require special build and must be specified at time of ordering.

Parts List MOD63~MOD140

Construction Figure

Part list MOD63~MOD140

Material of contraction

Item / Part Name / QTY / Material / Standard / Protection / Optional Material
1 / Body / 1 / Extruded Aluminum / ASTM 6000 series / Hard anodized / --
2 / Piston / 2 / Die casting aluminum / ASTM A380 / Chromatized
3 / Pinion / 1 / Carbon steel / ASTM 1045 / Nickel plated / Aluminum
4 / End cap / 2 / Die casting aluminum / ASTM A380 / Powder Coating
5 / Spring outer / 0-2 / Spring steel / Spring steel / Dip coating
6 / Spring inner / 0-2 / Spring steel / Spring Steel / Dip coating
7 / Guide band / 1 / POM / PTFE
8 / Bearing / 2 / POM / PTFE
9 / O-ring / 2 / NBR / Viton/Silicone
10 / Springholder / 2 / Carbon steel
11 / O-ring / 2 / NBR / Viton/silicone
12 / Washer / 1 / Nylon / PA66
13 / Cam / 1 / Stainless steel / ASTM 304 / Viton/silicone
14 / Spring Clip / 1 / Stainless steel
15 / O-ring / 1 / NBR / Viton/silicone
16 / Washer / 1 / POM / PTFE
17 / O-ring / 1 / NBR / Viton/silicone
18 / Bolt / 2 / Carbon steel
19 / Washer / 2 / Stainless steel / ASTM 304
20 / Stop Bolt / 2 / Stainless steel / ASTM 304
21 / Nut / 2 / Stainless steel / ASTM 304
22 / O-ring/washer / 2 / NBR/steel / Viton/silicone
23 / Cap Bolt / 8 / Stainless steel / ASTM 304
24 / Spring washer / 8 / Stainless steel / ASTM 304

Parts List MOD160~MOD350

Construction Figure

Parts List MOD160~MOD350

Material of construction

Item / Part Name / QTY / Material / Standard / Protection / Optional Material
1 / Body / 1 / Extruded Aluminum / ASTM 6000 series / Hard anodized / --
2 / Piston / 2 / Die casting aluminum / ASTM A380 / Chromatized
3 / Pinion / 1 / Carbon steel / ASTM 1045 / Nickel plated / Aluminum
4 / End cap / 2 / Die casting aluminum / ASTM A380 / Powder polyster painted
5 / Spring / 0-12 / Spring steel / Spring steel / Dip coating
6 / Cam / 1 / Stainless / ASTM 304
7 / Bearing / 2 / POM / PTFE
8 / O-ring / 2 / NBR / Viton/Silicone
9 / O-ring / 2 / NBR / Viton/silicone
10 / Guide band / 4 / POM / PTFE
11 / O-ring / 1 / NBR / Viton/silicone
12 / Bearing / 1 / POM / PTFE
13 / O-ring / 1 / NBR / Viton/silicone
14 / Washer / 1 / Nylon / PA66
15 / Washer / 1 / Stainless steel / ASTM 304
16 / Spring clip / 1 / Stainless steel / ASTM 304
17 / O-ring / 2 / NBR / Viton/silicone
18 / Washer / 2 / Stainless steel / ASTM 304
19 / Nut / 2 / Stainless steel / ASTM 304
20 / Stop Bolt / 2 / Stainless steel / ASTM 304
21 / Cap Bolt / 8 / Stainless steel / ASTM 304
22 / Spring washer / 8 / Stainless steel / ASTM 304

Technical data

Max. supply pressure: 145PSI

Rated supply pressure: 120 PSI

Output torque @80 PSI:

Double acting models:up to 56,552 In-lbs

Spring return models: up to 20,356NM In-lbs

Temperature range:

Standard Temp: -4°F to 180°F (NBR)

High Temp: -4°F to 250°F (Viton)

Low Temp: -40°F to 180°F (Silicone)

Actuator weight (lb.)

MOD / 63 / 85 / 100 / 125 / 140 / 160 / 190 / 210 / 240 / 270 / 300 / 350
DA / 3.3 / 7.5 / 11.1 / 22.1 / 35.7 / 43.7 / 72.8 / 106 / 152 / 220 / 249 / 295
SR (Full Springs) / 4.0 / 9.5 / 14.5 / 29.6 / 48.5 / 77.2 / 99.2 / 126 / 179 / 267 / 298 / 373

Actuator operating time (Second)

MOD / 63 / 85 / 100 / 125 / 140 / 160 / 190 / 210 / 240 / 270 / 300 / 350
DA / Open / 0.06 / 0.20 / 0.30 / 0.83 / 1.20 / 1.50 / 2.00 / 2.70 / 3.50 / 4.00 / 5.00 / 6.00
Close / 0.08 / 0.19 / 0.27 / 0.66 / 1.30 / 1.70 / 2.20 / 3.20 / 4.00 / 4.50 / 5.70 / 7.00
SR / Open / 0.14 / 0.31 / 0.44 / 1.08 / 1.80 / 2.10 / 2.40 / 3.50 / 4.10 / 4.50 / 6.40 / 7.50
Close / 0.14 / 0.33 / 0.46 / 0.90 / 1.60 / 1.80 / 2.80 / 3.90 / 4.60 / 5.00 / 7.60 / 8.50

The above approximated actuator operating time are obtained at the pressure of 6 Bar without load.

Actuator air consumption (L)

MOD / 63 / 85 / 100 / 125 / 140 / 160 / 190 / 210 / 240 / 270 / 300 / 350
Open / 0.19 / 0.51 / 0.79 / 1.63 / 2.40 / 3.10 / 4.30 / 5.90 / 10.00 / 14.50 / 23.80 / 36.00
Close / 0.23 / 0.64 / 1.00 / 2.21 / 3.80 / 4.90 / 6.90 / 9.50 / 15.20 / 21.40 / 38.10 / 45.00

The above data are obtained at room temperature.

Actuator dimensions (Inch)

Dimension of MOD63~MOD140 Figure

Dimension of MOD63~MOD140 Form

Bottom o f shaft / Mounting Holes (ISO5211)
Mod / A / B / C / D / E / F / G / J / N / T / H / I / Key / NO X Size
(mm) / PCD(mm)
63 / 7.32 / 3.22 / 3.98 / 2.91 / 0.08 / 0.16 / 0.79 / 1.14 / 0.56 / 0.38 / － / － / － / 4×M6-6H×9 (F05) / 50
4×M8-6H×12 (F07) / 70
85 / 10.12 / 4.13 / 5.12 / 2.91 / 0.08 / 0.16 / 0.79 / 1.57 / 0.76 / 0.50 / － / － / － / 4×M6-6H×9 (F05) / 50
4×M8-6H×12 (F07) / 70
100 / 11.81 / 4.84 / 8.87 / 3.46 / 0.08 / 0.16 / 0.79 / 1.89 / 0.76 / 0.50 / － / － / － / 4×M8-6H×12 (F07) / 70
4×M10-6H×15 (F10) / 102
125 / 15.35 / 5.87 / 7.05 / 4.33 / 0.08 / 0.16 / 0.79 / 2.31 / － / － / 1.25 / 1.13 / 0.25 / 4×M12-6H×18 (F12) / 125
140 / 17.68 / 6.56 / 7.95 / 4.41 / 0.08 / 0.16 / 0.79 / 2.68 / － / － / 1.25 / 1.13 / 0.25 / 4×M12-6H×18 (F12) / 125

Actuator dimensions (Inch)

Dimension of MOD160~MOD350 Figure

Dimension of MOD160~MOD350 Form

Bottom of shaft / Mounting Holes (ISO5211)
Mod / A / B / C / D / E / F / G / J / K / H / I / Key / NO X Size(mm) / PCD (mm)
160 / 18.74 / 7.52 / 8.46 / 6.89 / 4.41 / 6.22 / 0.08 / 0.16 / 0.79 / 1.25 / 1.13 / 0.25 / 4×M12-6H×15.88 (F12) / 125
190 / 21.54 / 9.06 / 10.31 / 8.11 / 4.57 / 6.97 / 0.08 / 0.16 / 1.18 / 1.52 / 1.38 / 0.32 / 4×M12-6H×15.88 (F12) / 125
210 / 23.26 / 9.96 / 11.34 / 8.98 / 6.14 / 0.08 / 0.16 / 1.18 / 2.06 / 0.50 / 0.50 / 4×M12-6H×15.88 (F12) / 125
4×M20-6H×25.4 (F16) / 165
240 / 27.64 / 11.14 / 12.76 / 10.24 / 6.22 / 0.12 / 0.16 / 1.18 / 2.06 / 1.85 / 0.50 / 4×M20-6H×25.4 (F16) / 165
270 / 28.43 / 12.20 / 14.02 / 11.57 / 7.87 / 9.84 / 0.12 / 0.16 / 1.18 / 2.06 / 1.85 / 0.50 / 4×M20-6H×25.4 (F16) / 165
300 / 29.21 / 13.54 / 14.88 / 12.56 / 8.62 / 10.63 / 0.12 / 0.16 / 1.18 / 2.06 / 1.85 / 0.50 / 4×M20-6H×25.4 (F16) / 165
350 / 33.86 / 15.79 / 17.00 / 15.04 / 10.31 / 12.40 / 0.12 / 0.16 / 1.18 / 2.06 / 1.85 / 0.50 / 4×M20-6H×25.4 (F16) / 165

Actuator body drillings for solenoid mounting (Namur standard, mm/Inch)

Actuator top drillings for accessory mounting (Namur standard, mm/Inch )

Mounting flange dimension details (Inch)

Bottom of shaft / Mounting Holes（ISO5211）
Mod / N / T / H / I / Key / NO X Size (mm) / PCD (mm)
63 / 0.563 / 0.378 / － / － / － / 4×M6-6H×9 (F05) / 50
4×M8-6H×12 (F07) / 70
85 / 0.752 / 0.500 / － / － / － / 4×M6-6H×9 (F05) / 50
4×M8-6H×12 (F07) / 70
100 / 0.752 / 0.500 / － / － / － / 4×M8-6H×12 (F07) / 70
4×M10-6H×15 (F10) / 102
125 / － / － / 1.250 / 1.126 / 0.252 / 4×M12-6H×18 (F12) / 125
140 / － / － / 1.250 / 1.126 / 0.252 / 4×M12-6H×18 (F12) / 125
160 / － / － / 1.250 / 1.126 / 0.252 / 4×M12-6H×15.88 (F12) / 125
190 / － / － / 1.516 / 1.378 / 0.315 / 4×M12-6H×15.88 (F12) / 125
210 / － / － / 2.059 / 0.500 / 0.500 / 4×M12-6H×15.88 (F12) / 125
4×M20-6H×25.4 (F16) / 165
240 / － / － / 2.059 / 1.850 / 0.500 / 4×M20-6H×25.4 (F16) / 165
270 / － / － / 2.059 / 1.850 / 0.500 / 4×M20-6H×25.4 (F16) / 165
300 / － / － / 2.059 / 1.850 / 0.500 / 4×M20-6H×25.4 (F16) / 165
350 / － / － / 2.059 / 1.850 / 0.500 / 4×M20-6H×25.4 (F16) / 165

Operation principle of double acting actuator

Double acting actuator torque output:

MOD / Air Supply (psi)
40 / 50 / 60 / 70 / 80 / 90 / 100 / 120
Output torque (in-lbs.)
DA63 / 164 / 205 / 246 / 287 / 328 / 369 / 410 / 492
DA85 / 434 / 543 / 652 / 760 / 869 / 977 / 1086 / 1303
DA100 / 676 / 845 / 1014 / 1184 / 1353 / 1522 / 1691 / 2029
DA125 / 1468 / 1835 / 2202 / 2568 / 2935 / 3302 / 3669 / 4403
DA140 / 2025 / 2531 / 3038 / 3544 / 4050 / 4557 / 5063 / 6076
DA160 / 3174 / 3968 / 4761 / 5555 / 6348 / 7142 / 7935 / 9522
DA190 / 4747 / 5934 / 7121 / 8308 / 9495 / 10681 / 11868 / 14242
DA210 / 6959 / 8699 / 10439 / 12179 / 13918 / 15658 / 17398 / 20878
DA240 / 10388 / 12985 / 225998 / 18179 / 20776 / 23373 / 25970 / 31164
DA270 / 12921 / 15045 / 20355 / 26550 / 29382 / 31949 / 37259 / 42480
DA300 / 17700 / 20523 / 28010 / 34515 / 37170 / 41330 / 48135 / 54959
DA350 / 26161 / 31241 / 41330 / 51480 / 56552 / 53640 / 71623 / 81818

Operation principle of spring return actuator:

Spring Setting

VALIDFROMMOD.63TOMOD. 140
SPRING SETTING
SET / EXTERNALSPRING / INTERNALSPRING
S1 / 1 / 1
S2 / 2 / -
S3 / 1 / 2
S4 / 2 / 1
S5 / 2 / 2
VALID FROM MOD. 160 TO MOD. 350
SPRING SETTING
SET / SPRINGSFOREACHSIDE
S5 / 2/3
S6 / 3/3
S7 / 3/4
S8 / 4/4
S9 / 4/5
S10 / 5/5
S11 / 5/6
S12 / 6/6

Spring return actuator torque output MOD SR160 ~SR350

MOD / SPRING SET / SPRING TORQUE (in-lbs) / Air Supply (psi)
40.0 / 50 / 60 / 70 / 80.0 / 90 / 100 / 120
Output Torque (in-lbs)
0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º
END / Start / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End
SR160 / S5 / 1164 / 1732 / 2010 / 1442 / 2804 / 2235 / 3597 / 3029
S6 / 1397 / 2079 / 1777 / 1095 / 2571 / 1889 / 3364 / 2682 / 4158 / 3476
S7 / 1630 / 2425 / 1544 / 749 / 2338 / 1542 / 3131 / 2336 / 3925 / 3129 / 4719 / 3923
S8 / 1863 / 2772 / 2105 / 1196 / 2899 / 1989 / 3692 / 2783 / 4486 / 3576 / 5279 / 4370 / 6073 / 5163
S9 / 2095 / 3118 / 2666 / 1643 / 3459 / 2436 / 4253 / 3230 / 5046 / 4023 / 5840 / 4817
S10 / 2328 / 3465 / 2433 / 1296 / 3227 / 2090 / 4020 / 2883 / 4814 / 3677 / 5607 / 4470 / 7194 / 6057
S11 / 2561 / 3811 / 2994 / 1743 / 3787 / 2537 / 4581 / 3330 / 5374 / 4124 / 6961 / 5711
S12 / 2794 / 4158 / 2761 / 1397 / 3554 / 2190 / 4348 / 2984 / 5141 / 3777 / 6729 / 5364
SR190 / S5 / 1729 / 2502 / 3018 / 2245 / 4205 / 3432 / 5392 / 4619
S6 / 2075 / 3003 / 2672 / 1745 / 3859 / 2932 / 5046 / 4118 / 6233 / 5305
S7 / 2421 / 3503 / 2326 / 1244 / 3513 / 2431 / 4700 / 3618 / 5887 / 4805 / 7074 / 5992
S8 / 2767 / 4003 / 3167 / 1931 / 4354 / 3117 / 5541 / 4304 / 6728 / 5491 / 7914 / 6678
S9 / 3113 / 4504 / 4008 / 2617 / 5195 / 3804 / 6382 / 4991 / 7569 / 6178 / 8755 / 7364
S10 / 3459 / 5004 / 3662 / 2117 / 4849 / 3303 / 6036 / 4490 / 7223 / 5677 / 8410 / 6864 / 10783 / 9238
S11 / 3805 / 5505 / 4503 / 2803 / 5690 / 3990 / 6877 / 5177 / 8064 / 6363 / 10437 / 8737
S12 / 4150 / 6005 / 4157 / 2303 / 5344 / 3489 / 6531 / 4676 / 7718 / 5863 / 10091 / 8237
SR210 / S5 / 2688 / 3789 / 4271 / 3170 / 6011 / 4910 / 7751 / 6650
S6 / 3225 / 4547 / 3734 / 2413 / 5474 / 4152 / 7214 / 5892 / 8953
S7 / 3763 / 5304 / 3196 / 1655 / 4936 / 3395 / 6676 / 5134 / 8416 / 6874 / 10156 / 8614
S8 / 4300 / 6062 / 4399 / 2637 / 6138 / 4377 / 7878 / 6116 / 9618 / 7856 / 11358 / 9596
S9 / 4838 / 6820 / 5601 / 3619 / 7341 / 5359 / 9081 / 7098 / 10820 / 8838 / 12560 / 10578
S10 / 5375 / 7578 / 5063 / 2861 / 6803 / 4601 / 8543 / 6341 / 10283 / 8080 / 12023 / 9820 / 15502 / 13300
S11 / 5913 / 8335 / 6266 / 3843 / 8005 / 5583 / 9745 / 7323 / 11485 / 9062 / 14965 / 12542
S12 / 6450 / 9093 / 5728 / 3085 / 7468 / 4825 / 9208 / 6565 / 10948 / 8305 / 14427 / 11784

Spring return actuator torque output MOD SR240 ~SR350

MOD / SPRING SET / SPRINGTORQUE(in-lbs)
LBS) / Air Supply (psi)
40.0 / 50 / 60 / 70 / 80.0 / 90 / 100 / 120
Output Torque (in-lbs)S
0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º / 0º / 90º
END / Start / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End / Start / End
SR240 / S5 / 3901 / 5401 / 6487 / 4987 / 9084 / 7584 / 10325 / 8825
S6 / 4681 / 6481 / 5707 / 3907 / 8304 / 6504 / 9545 / 7745 / 13498 / 11698
S7 / 5462 / 7562 / 4926 / 2826 / 7523 / 5423 / 8764 / 6664 / 12717 / 10617 / 15314 / 13214
S8 / 6242 / 8642 / 6743 / 4343 / 7984 / 5584 / 11937 / 9537 / 14534 / 12134 / 17131 / 14731
S9 / 7022 / 9722 / 7204 / 4504 / 11157 / 8457 / 13754 / 11054 / 16351 / 13651 / 18948 / 16248
S10 / 7802 / 10802 / 6424 / 3424 / 10377 / 7377 / 12974 / 9974 / 15571 / 12571 / 18168 / 15168 / 23362 / 20362
S11 / 8583 / 11883 / 9596 / 6297 / 12193 / 8894 / 14790 / 11491 / 17387 / 14088 / 22582 / 19282
S12 / 9363 / 12963 / 8816 / 5216 / 11413 / 7813 / 14010 / 10410 / 16607 / 13007 / 21801 / 18201
SR270 / S5 / 5045 / 7071 / 7992 / 5974 / 10576 / 8567 / 15744 / 13735
S6 / 6036 / 8452 / 6992 / 4593 / 9585 / 7177 / 14753 / 12355 / 19930 / 17532
S7 / 7036 / 9841 / 6009 / 3195 / 8602 / 5788 / 13771 / 10956 / 18948 / 16134 / 22346 / 19541
S8 / 8009 / 11248 / 7611 / 4398 / 12779 / 9567 / 17957 / 14753 / 21373 / 18134 / 23939 / 20700
S9 / 8983 / 12629 / 11788 / 8169 / 16965 / 13355 / 20399 / 16753 / 22966 / 19320 / 28276 / 24630
S10 / 10001 / 14010 / 10797 / 6788 / 15974 / 11965 / 19382 / 15372 / 21948 / 17939 / 27258 / 23249 / 32480 / 28470
S11 / 11018 / 15417 / 14992 / 10567 / 18364 / 13965 / 20930 / 16532 / 26240 / 21842 / 31462 / 27063
S12 / 11992 / 16780 / 14001 / 9177 / 17390 / 12602 / 19957 / 15169 / 25267 / 20479 / 30488 / 25700
SR300 / S5 / 6461 / 9390 / 11240 / 8310 / 14063 / 11133 / 21550 / 18620
S6 / 7753 / 11266 / 9947 / 6434 / 12771 / 9257 / 20258 / 16744 / 26762 / 23249
S7 / 9045 / 13142 / 8655 / 4558 / 11478 / 7381 / 18966 / 14868 / 25470 / 21373 / 28125 / 24028
S8 / 10337 / 15018 / 10186 / 5505 / 17673 / 12992 / 24178 / 19497 / 26833 / 22152 / 30993 / 26311
S9 / 11629 / 16895 / 16381 / 11116 / 22886 / 17620 / 25541 / 20275 / 29701 / 24435 / 36506 / 31241
S10 / 12921 / 18780 / 15089 / 9231 / 21594 / 15735 / 24249 / 18390 / 28409 / 22550 / 35214 / 29355 / 42038 / 36179
S11 / 14222 / 20656 / 20293 / 13859 / 22948 / 16514 / 27108 / 20674 / 33913 / 27479 / 40737 / 34303
S12 / 15505 / 22532 / 19010 / 11983 / 21665 / 14638 / 25824 / 18797 / 32630 / 25603 / 39453 / 32426
SR350 / S5 / 10381 / 15063 / 15780 / 11098 / 20859 / 16178 / 30948 / 26267
S6 / 12461 / 18081 / 13700 / 8080 / 18780 / 13160 / 28869 / 23249 / 39020 / 33400
S7 / 14532 / 21090 / 11629 / 5071 / 16709 / 10151 / 26798 / 20240 / 36949 / 30391 / 42020 / 35462
S8 / 16611 / 24107 / 14629 / 7133 / 24718 / 17222 / 34869 / 27373 / 39940 / 32444 / 37028 / 29532 / 55012
S9 / 18691 / 27116 / 22638 / 14213 / 32789 / 24364 / 37860 / 29435 / 34949 / 26523 / 52932 / 44507
S10 / 20762 / 30134 / 20567 / 11195 / 30718 / 21346 / 35789 / 26417 / 32878 / 23506 / 50861 / 41489 / 61056 / 51684
S11 / 22842 / 33143 / 18337 / 33710 / 23408 / 30798 / 20497 / 48781 / 38480 / 58976 / 48675
S12 / 24922 / 36161 / 15319 / 31630 / 20390 / 28718 / 17479 / 46701 / 35462 / 56897 / 45657