Our CLLI do not operate like Surge-protectors or Arrestors:

  • CLLI will convert each SETUP into a SAFE-island – we put an imaginary circle around all the equipment in each SETUP / any cable crossing this imaginary-circle is considered a Point-of-Danger (PoD) / but, a cable between equipment within this SETUP is not a PoD.
  • A SETUP-location = a group of INTER-connected EQUIPMENT at one location
  • Two or more SETUP-locations make up a NETWORK.
  • A SAFE-island can only be safe when every PoDis correctly ISOLATED.

How can we help?

  • We believe we are in a very good position to help you – but only if we know enough about your needs, equipment-types in each SETUP-location & what external connections or Points-of-Danger(PoD) each SETUP is connected to or from.And, no two setups are the same – each SETUP-location is unique!
  • Hence, we hope you will forgive us for asking you to answer 3-questions (found in 1, 2 3 below) by using the boxes provided on the right-side. TQ!

What can you tell us?

To help you, we need to know what CLLI to use & how you can install.

So please tell us more about your equipment setups – 1-setup at a time:

  1. How many SETUP-locations do you wish to protect?
  2. What equipment do you have in each SETUP-location?
  3. What PoD do you find in each SETUP-location?

For example: If you have 4-SETUPS you wish to be protected, your info provided will look like the sample below:

Note: Please do not tell some & leave out other details – everything is important!

SETUP # / What SETUP & where is it located / Name ALL the equipment in this SETUP / Name ALL external connections & types (PoD) & to/from where?
1 / UNIFI
On a table in my Living room /
TM-BTU / Modem
+Router
+Dect-phone
+PC/Monitor/Printer / ADSL from TM-gateway
+Power supply from wall-outlet
+LAN-cable to Set-top box upstairs (or Powerline-adapter plugged into another wall-outlet)
2 / Set-Top-Box
+WiFi-extender
Upstairs room /
Set-Top-Box
+Powerline-adapter (PLA) c/w WiFi Extender
+IP-TV setup / Powerline Wall-outlet
+LAN cable from downstairs (or PLA plugged into another wall-outlet)
3 / CCTV control & DVR
In Master bedroom /
DVR
+PTZ-controller
+Monitor / Power supply from wall outlet
+2-wire DC power 12V2A to 2-PTZ-cameras
+BNC-cables from 6-cameras
4 / PTZ-camera
Outdoors /
PTZ-camera / 2-wire DC power 12V2A from DVR-setup
+BNC-cable from DVR

For more info: Go to or (for online-purchase as well)

Contact us: Hotline-1700 81 5225 / email- /

Your particulars:

Name / Phone
Address / Note:
Email / Date

Details about your SETUPS – fill 1-setup at a time, please!

Thank you for taking the time to make accurate info-details available.

It will help us to provide effective solutions, where possible.

Note: Please do not tell some & leave out other details – everything is important!

SETUP # / What SETUP & where is it located / Name ALL the equipment in this SETUP / Name ALL external connections & types (PoD) & to/from where?
1
2
3
4
5

Note or any info you might wish to tell us: