CERTIFICATE OF CONFORMITY No.6 / 17
Instytut Nafty i Gazu – Państwowy Instytut Badawczy hereby states that the products:
PE butt-fusion and electro fusion fittings indicated on pages 2÷3
PE 100, SDR 11, SDR 17for the supply of gaseous fuels
placed on the market under the name or trade mark of:
AGRU KUNSTSTOFFTECHNIK GmbH
A-4540 Bad Hall, Ing Pesendorferstrasse 31, Austria
and produced in the manufacturing plant:
AGRU KUNSTSTOFFTECHNIK GmbH
A-4540 Bad Hall, Grünburgerstrasse 41, Austria
fulfill the requirements of national technical specification
PN-EN 1555-3+A1:2013-05
[EN 1555-3:2010+A1:2012]
Manufacturer has determined the product type, implemented the system of FPCas understood by certification Programme PCW-16 and also submitted the product for assessment by accredited testing laboratory. INiG-PIB Certification Office has performed: verification of correctness of product’s performance assessment as understood by certification Programme PCW-16, including the sampling of products to test carried out by manufacturer; initial inspection of factory and FPC and performs the continuous surveillance, assessment and acceptance of FPC in relation to products’performancedeclared by manufacturer described by a/m technical specification.Certification process has been carried out according to Certification Programme PCW - 16 (programme type 3 acc to PN-EN ISO/IEC 17067:2014-01)
This certificate was issued on17.07.2017 and updated on 08.03.2018and will remain valid provided that neither the technical specification, product itself nor the manufacturing conditions are modified significantly, unless suspended or withdrawn by the certification body.
Certification Office Manager Director of the INiG-PIB
Magdalena Swat MariaCiechanowska
Kraków, 08-03-2018
1/3
Validity of these certificate could be confirmed by email:
item / name of product / code / nominal size dn/DNSpigot fittings
1. / Multi-elbow 90º / 25068 / 20 ÷ 225
2. / Long elbow 90º / 25061 / 250 ÷ 315
3. / Long elbow 45º / 25060 / 20 ÷ 315
4. / Long elbow 30º / 25019 / 90 ÷ 160
5. / Elbow 22º / 25395 / 90 ÷ 250
6. / Elbow 11º / 25394 / 90 ÷ 250
7. / Long equal tee / 25066 / 20 ÷ 400
8. / Long reduced tee / 25065 / 63/50 ÷315/250
9. / Long end cap / 25064 / 20 ÷ 315
10. / Long stub flange / 25062 / 20 ÷ 400
11. / Long concentric reducer / 25067 / 25/20 ÷315/250
12. / Long excentric reducer / 25069 / 25/20 ÷250/225
13. / Short elbow 90º / 25001 / 250 ÷ 500
14. / Short equal tee / 25006 / 20 ÷ 500
15. / Short reduced tee / 25016 / 90/32 ÷225/125
16. / Short concentric reducer / 25009 / 25/20 ÷315/280
17. / Short excentric reducer / 25005 / 250/160 ÷355/250
18. / Short concentric reducer / 25007 / 63/16 ÷ 450/315
19. / Short end cap / 25004 / 355 ÷ 500
20. / Short stub flange / 25012 / 20÷ 630
21. / Adaptor G.W. / 25032 / 20 ÷ 63
22. / Adaptor G.Z. / 25033 / 20 ÷ 63
Electrofusion fittings
1. / Coupler Ele / 25173 / 20 ÷ 500
2. / Coupler Ele / 25373 / 500, 630
3. / Coupler Ele / 25173.9 / 20 ÷500
4. / Coupler Ele / 70173 / 20 ÷500
5. / Tee Ele / 25176 / 20 ÷ 225
6. / Elbow 90º Ele / 25171 / 20 ÷ 225
7. / Elbow 45º Ele / 25170 / 20 ÷ 225
8. / Concentric reducer Ele / 25177 / 25/20 ÷ 225/160
9. / End cap Ele / 25174 / 20 ÷ 315
10. / Adaptor socket G.W. (brass/ steel) / 25184* / 20x1/2 ÷ 63x2
11. / Adaptor socket G.Z. (brass/ steel) / 25185* / 20x1/2 ÷ 63x2
item / name of product / code / nominal size dn/DN
Electrofusion fittings
12. / Adaptor G.W. (brass/ steel) / 25180* / 20x1/2 ÷ 63x2
13. / Adaptor G.Z ( brass/ steel) / 25181* / 20x1/2 ÷ 63x2
14. / Tapping saddle with valve / 25079 / 63 ÷ 225
15. / Tapping saddle with screw cap / 25278 / 63/20 ÷ 225/63
16. / Adaptor elbow 90º G.W (brass/ steel) / 25187* / 20 ÷ 63
17. / Adaptor elbow 90º G.Z (brass/ steel) / 25186* / 20 ÷ 63
18. / Adaptor elbow 45º G.W (brass /steel) / 25189* / 20 ÷ 63
19. / Adaptor elbow 45º G.Z (brass/ steel) / 25188* / 20 ÷ 63
Note: the products marked with* are not admitted to use in gas grids and gas installation in Poland
Kraków, 08-03-2018
Kierownik
Biura Certyfikacji
Magdalena Swat
1/3
Validity of these certificate could be confirmed by email: