Name of Trade (S) for Which Affiliation Sought : PLUMBER

Name of Trade (S) for Which Affiliation Sought : PLUMBER

1

Tool list Plumber revised w.e.f. Feb. 08

Name of the Trade for which affiliation is sought: PLUMBER

Number of units in 1st shift:

Number of units in 2nd shift:

Number of units in 3rd shift:

Total units:

Sl. No. / Name of the tools Equipment & Machinery as per syllabus / Number required for Instructor &Trainees for one unit as per NCVT norms/syllabus / Total Number of Tools and equipments required for the total units affiliated and sought affiliation / Total number actually available for all the units / Indicate shortage
if any / Cost of the Tool, Equipment & Machinery / Name, Address, Tel. No. Email. Vat/TIN No. of the Supplier of General Machineries
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8

TRAINEES TOOL KIT

Rule steel 300mm both in inch and mm. / 17 Nos.
Rule wood 4 fold 600mm / 17 Nos.
Hacksaw frame adjustable for 250 to 300 mm. / 17 Nos.
Scriber 200mm / 17 Nos.
Centre punch 100mm / 17 Nos.
Chisel cold flat 20 x 250mm / 17 Nos.
Hammer ball pain 800 gms. / 17 Nos.
Hammer ball pain 300mm / 17 Nos.
File flat rough 300mm / 17 Nos.
Level spirit wooden 300mm / 17 Nos.
Plumb bob 50gms. / 17 Nos.
Trowel 125 IS:6013 / 17 Nos.
Stillson wrench 200 & 350mm / 17 Nos. each
Screw driver 250mm / 17 Nos.
Wooden mallet small IS:2022 / 17 Nos.
Cutting pliers 200 IS:3650 / 17 Nos.
Steel tape / 17 Nos.

TOOLS, MEASURING INSTRUMENTS, SHOP OUTFIT & GENERAL INSTALLATIONS

Surface plate 400 x 400mm grade 1. / 1 No
Scribing block universal 300mm / 2 Nos.
Hand vice jaw 50mm / 2 Nos.
File flat smooth 200mm / 2 Nos.
File half round rough 300mm / 2 Nos.
File square rough 250mm / 2 Nos.
File square smooth 200mm / 2 Nos.
File triangular rough 250mm / 2 Nos.
File flat rasp 250mm / 2 Nos.
File triangular smooth 200mm / 2 Nos.
Chisel cold flat 20mm x 300mm / 2 Nos.
Chisel cross cut 6 x 150mm IS:402 / 2 Nos.
Chisel round cut 3 x 150mm IS:402 / 2 Nos.
Chisel diamond point 6 x 150mm IS:402 / 2 Nos.
Tap and die set to cut BSP thread / 1 set
Punch letter set / 1 set
Punch number set / 1 set
Chase wedge 50mm / 3 Nos.
Dresser lead 350x50mm / 4 Nos.
Stick setting in 350x 50mm / 4 Nos.
Saw plumber 300mm / 4 Nos.
Spanner monkey upto 50mm / 2 Nos.
Cutter, pipe wheel type 6mm to 25mm / 1 No.
Pipe jointer, lead, universal / 1 No.
Oil stone 150mm x 50mm x 25mm / 3 Nos.
Soldering iron, copper fit, fire heated, hatched, straight 500gms / 4 Nos.
Snip straight 250mm / 4 Nos.
Try square 200mm / 4 Nos.
Inside caliper 150mm / 4 Nos.
Caliper outside 150mm / 4 Nos.
Odd let caliper 200mm / 4 Nos.
Tenon saw / 2 Nos.
Handsaw / 2 Nos.
Mortice chisel / 2 sets
Firmer chisel / 2 sets
Mallet medium IS:2922 / 2 sets
Jack plane / 2 sets
Pliers combination 200mm / 2 Nos.
Blow lamp 500 millilitre / 4 No.s
Pipe opener / 1 No.
Washer cutter / 1 No.
Pressing stick / 1 No.
Mandrel / 2 Nos.
Plumber kit containing tampin, bent pin, plumbers hammers dressers, mallets, chase wedges, draw knife and step turner. / 2 sets.
Bobbin and follower / 2 each
Bend bolt / 2 Nos.
Sheet lead knife / 2 Nos.
Chipping knife / 2 Nos.
Mirror 100 x 150mm / 2 Nos.
Splash stick / 1 No.
Soil pot with brush / 1 No.
Pot hook / 1 No.
Turn pin / 1 No.
D.E. spanners 7 x 8, 10 x 11, 13 x 17, 19 x 22, 24 x 27 IS:2028 / 2 sets
Branch gimlets / 2 Nos.
Bending spring / 1 set
Long dumy. / 2 Nos.
Short dumy. / 2 Nos.
Plumbers laddle / 2 Nos.
Joining cramp / 2 Nos.
Plumbers metal melting pot 10 kg. / 1 No.
Pipe stocks and dies complete with stocks brushing, bushing holders taps and tap wrenches sizes covered to suit pipes of bore dia 6,8,10,20,25,32, 40 and 50mm. / 6 sets.
Pipe vice to grip pipes upto 77mm IS:2587 / 8 Nos.
Tool caulking set of 2. / 2 sets.
Stillson pattern pipe wrenches 450mm to take pipe upto 52mm dia IS:4003. / 2 sets
Stillson pattern pipe wrenches 300mm to take pipe 20mm to 32mm. / 2 sets
Chain pipe wrench 90mm m- 650mm IS:4223. / 1 No.
Adjustable spanner A 375 IS:1649 / 2 Nos.
Anvil 50 or 63 kg. IS:510. / 1 No.
Pipe bender manually operated / 1 No.
Vice leg 75mm, jaw on stand IS:2588. / 1 No.
Hand drill 6mm capacity with drill chuck. / 1 No.
Drill twist (Straight shank) 3mm to 6mm. / 1 set
Portable forge 450mm with hand blower. / 1 No.
Flat smithy tong. / 2 Nos.
Working bench 2400 x 1200 x 750mm with 4 vices 125mm jaws. / 2 Nos.
Bath tub small size / 1 No.
Stop tap water 20mm IS:781. / 4 Nos.
Wash basin (16" x 14" x 10") equivalent metric / 2 Nos.
Water heater 22 liters. / 1 No.
Water closet (European type with down type cistern) / 1 set
Water closet Indian type complete with over head cistern. / 1 set
Urinal wall type complete with automatic system. / 1 set
*101. / Water meter / 2 Nos.
Steel lockers with 8 drawers. / 2 Nos.
Metal rack 1800 x 1500 x 450mm / 1 No.
Desk / 1 No.
Stool / 1 No.
Black board with easel / 1 No.
*107. / Fire extinguisher / 1 No.
*108. / Fire buckets with stud. / 1 No.
Steel almirah / 1 No.
Ratchet brack with post and clamp flat drill 6 to 35mm by 0.2mm. / 1 set
PVC welding plant / 1 No.
Electric pump 1 HP. / 1 No.
D.E. pedestal grinder with two wheels 175 rough and smooth. / 1 No.
Hydraulic pressure machines for testing leakage in GI pipe fittings etc. / 1 No.
Sight rail and banning rod. / 1 each
Ratchet pipe die 15 mm to 32mm. / 1 No.
Bench Drilling machine with chuck and key upto 15mm capl / 1 set
Double face hammers. / 4 Nos.
Dormat, Pickle, spade, Girmale. / 1 each
Pipe bender (Hydraulic type) / 1 No.
Monkey Plier (Gas pliers) / 4 Nos.
Spring divider
Vernier caliper 250mm
Out side Micrometer 0-25 mm

Note :-

  1. No additional items are required to be provided for the batch working in the second shift except the items under trainees Tool kit and lockers.
  2. No additional number of item marked (*) are required to be provided for additional number of batches/units.
  3. Items such as sockets elbow U-trap, W-trap pipes etc. required for day to day plumbing work should be purchased from training grant.
  4. The specification of the items in the above list have been given in Metric Units and are based on the ISI standards wherever available. While procuring the ISI specifications should be strictly followed. Measuring instrument such as steel rule which are graduated both in English and Metric units may be procured, if available.

ooo