Specification text N 523/11
N 523/11Venetian blind actuator, 8x AC 230 V, 6 A,
for control of one sun protection, door or window drive with a motor for AC 230V and electromechanical or electronic limit switchesper actuator channel, with electricallyinterlocked relays to reverse the direction of rotation, relay contacts rated for nominal voltage AC 230 V, 6 A (resistive load), with 2 terminals per channel for interfacing of UP andDOWN connector of the drive, with selection by the user whether all actuator channels are to be identically or individually configured, with communication objects per actuator channel for moving the sun protection to the limit positions or to stop travel and for step-by-step adjustment of the blind slats, with communication objects for moving the sun protection and adjusting the blind slats directly toa newposition (as precisely as drive mechanics permit) by positioningcommands as percentage values, with automatic opening of blind slats up to a set position after the blinds have been lowered without any stop from the upper to the lower limit position, with integrated 1-bit scene control for programming and recallingof 2 favored positions of blind and slats, with integrated 8-bit scene control and assignment of up to 8 scenes per channel, with an optional object “Sunshine” for activation / deactivation of sunlight tracking of the slats for shading with greatest possible daylight component, with differentiation between automatic and manual mode and with automatic switch-over from automatic to manual mode of the respective actuator channel on activation of a bus pushbutton for manual control of the sun blind, with priority of manual mode over automatic positioning commands, with optional central command object for switching-over of all actuator channels to automatic mode and for moving the sun blinds to the upper or lower limit position, with alarm object per device or per channel for moving the sun protection to the configured safety position in the event of a wind alarm e.g. and with blocking of travel to another position as long as alarm pending, with travel blocking object per device or per channel for blocking the sun protection in its current position (needed during cleaning of an outdoorVenetian blind e.g.), with status objects per actuator channel for query or automatic transmission of sun blind and slat position as percentage values, with optional status objects for signalling that the lower or upper limit position has been reached, with electronics powered by an integrated power supply unit for AC 230 V, with green LED for displaying the 230 V operating voltage, with pushbutton for switch-over between bus mode and direct mode, with yellow LED for display of activated direct mode, with two pushbuttons each per actuator channel for drive control in direct mode, integrated in the actuator housing and operational if the actuator is supplied with AC 230 V (even if bus voltage missing or communication not operational), with integrated bus coupling unit with only half a standard bus load, with bus connection via bus terminal and contact system to data rail, as max. 8 module units wide installation device for snap-on mounting on a DIN rail EN 60715-TH35-7.5.
Manufacturer: Siemens
Order no.: 5WG1 523-1AB11