ARMAFLEX 520 ADHESIVE
ARMAFLEX NONFLAM ADHESIVE
ISOLINE NON FLAM ADHESIVE / Page 1 of 2
Health Hazards :
HIGHLY FLAMMABLE (ONLY APPLIES TO ARMAFLEX 520)
HARMFUL IF INHALED (NARCOTIC IN HIGH CONCENTRATIONS)
CAN BE ABSORBED THROUGH THE SKIN
CAN CAUSE SERIOUSE DAMAGE IF SPLASHED INTO THE EYES
FREQUENT OR PROLONGED CONTACT MAY IRRITATE THE SKIN AND CAUSE DERMATITIS
Department/ Work area:
Various
Approved use:
As an adhesive for jointing ARMAFLEX foam rubber type insulation. Usage rate 1-2 litres per shift / Duration of use:
up to 6 hours / day
Who is exposed and when?
Handlers during application and possibly anyone in close proximity. / No of People exposed?
Dependant on nature of work
How is/could anyone be exposed?
During application and spreading of liquid product - Inhalation of vapours and skin absorption.
During handling of glued ARMAFLEX insulation - contact with the hands and fingers is possible.
Risk assessment:
Low Risk Providing the following controls are followed
Control measures / Yes / No / Description/approved type
Process enclosure / N
Local exhaust ventilation / N
Other ventilation / / Ensure good ventilation e.g. open doors and windows
Note - the use of this product is prohibited in poorly ventilated or confined spaces.
Method of work / / Keep opened glue tin away from nose and mouth during application.
Only one tin to be open at any one time.
Do not work in vicinity of open flames, or sparks from welding and grinding.
Personal protective equipment / / Gloves - Nitrile impervious
When splashes to the eyes are likely e.g. when gluing above head, wear Goggles to BSEN 166-349B
Overalls to worn.
Respirators - Production / Y / Half mask respirator fitted with A1 or A2 (organic vapour) cartridge shall be worn when insulating vessels/applying sheet and when using glue for more than 15 minutes. Masks to be inspected before every safety meeting.
Respirators - Site / N / Not normally required but if further risk assessment shows a respirator should be worn -specify a half mask respirator fitted with A1 or A2 (organic vapour) cartridge.
Welfare / / Hand washing facilities must be available
Eye wash must be available
Hygiene / / Do not smoke, eat or drink whilst handling.
Wash hands before eating or drinking
DO NOT USE THINNERS TO CLEAN SKIN
Other / / NO NAKED FLAMES, SMOKING, WELDING OR GRINDING
Transport:
This is a packing group III product; therefore, the carriage of dangerous goods by road regulations may apply.
Transport in suppliers containers with lids tightly sealed.
Storage:
Factory- containers must be stored in the paint store. Site- containers must be stored in a cupboard or bin
Constructed of fire resisting material, or in a secure position in the open air away from buildings.
Spillage: - Leaks from containers:-
The quantities in use at any one time pose a low risk. Should spillage occur, wipe up spill with absorbent material whilst wearing PPE
First aid:
Inhalation - Remove to fresh air seek medical advice if symptoms persist.
Skin contact - Wash in soap and water NOT THINNERS.
Eye contact - Immediately irrigate with eyewash solution or water for 15 minutes holding the eye lids open
Ingestion - Obtain immediate medical attention DO NOT INDUCE VOMITING.
Fire fighting measures:
Extinguishing media - Water spray or dry powder.
Disposal of packaging and unused substance:
Dried waste and emptied containers may be disposed of as normal industrial waste, otherwise seek advice from a
registered waste operator or environmental engineer.
Manufacturer/supplier:
ARMSTRONG Insulation Products, Mars Street, Oldham, Lancs OL9 6LY Telephone 0161 287 7100
ISOLINE – Orapi Ltd Unit 1 Rosse StreetBradfordBD8 9AS Telephone 01274 82200
Substance:
Contact adhesive, based on chloroprene rubber in a blend of flammable solvents
Data sheet ref:
N/A
Hazardous components:
1 Acetone, 2 Toluene, 3 Methyl Ethyl Ketone, 4 n-Hexane, 5 Isopropanol
Risk No and phrase: R 11 Highly Flammable
R 40 Possible risk of irreversible effects
Safety No and phrase: S 7 Keep container tightly closed
S 16 Keep away from sources of ignition
S 37 Wear suitable gloves
S51 Use only in well ventilated areas
EEC Labelling Classification :
Very toxic ( ) Toxic ( ) Irritant ( ) Harmful ( Y ) Corrosive ( ) Flammable ( )
OEL:MEL N/A or OES 8 hour TWA 15 minute reference period
- Acetone 750 ppm 1500
- Toluene 50 ppm 150 SK
- Methyl Ethyl Ketone 200 ppm 300
- n-Hexane 20 ppm
- Isopropanol 400 ppm 500 SK
Any other comments:
If used as directed in this assessment, exposures are unlikely to exceed the exposure limits. However if used in poorly ventilated or confined spaces, high concentrations of solvent vapour could accumulate, presenting both a health hazard, and a fire/explosion risk.
THE USE OF THIS PRODUCT IS PROHIBITED IN POORLY VENTILATED OR CONFINED SPACES.
Assessor: Date: Date for review: