MEGAÖKO Kft.
MEGAMORV STEEL SHEET BOILERS
fired with non-industrial wood in manual mode and pellet in automatic mode, for hot water heating
Type series:
MEGAMORV SFP-30
Manufacturer:
MEGAÖKO Kazánfejlesztő-gyártó Kft.
Domicile: 1133 Budapest, Hegedűs Gyula u. 88.
Plant: 3214 Nagyréde, Kossuth u. 4.
Tel: +(36-37)373-160,
+(36-37)373-140,
+(36-37)373-415
Fax: 0036-37/373-757
E-mail:
Internet: www.tuzelestechnika.hu/megaoko
Quality Certificate:
ÁEEF SzGy. 1127-II/M /issued by the State Energy and Energy Safety Supervisory Board Hungary - ÁEEF/Minőségi bizonyítványszám
Application:
MEGAMORV SFP 30 boilers are primarily designed for automatic pellet firing. For safety considerations, the combustion chamber has been formulated so that the grid removed, the boiler can be fired with lumber and waste wood in manual mode. Can be applied to heat large family houses and multi-storey buildings up to 20 m.
Technical Description:
The wood-fired boiler is made of 5 mm welded steel sheets with a three-phase flue pipe construction. The boiler body comprises two main parts, one is the precombustor including the combustion chamber and the tilted grill. The tilted grill, also forwarding burning wood, can be moved by an arm. The pellet burner and safety accessories are mounted onto the front door of the combustion chamber. Pellet is fed automatically to the pellet burner by a screw conveyor from a temporary pellet container adjacent to the boiler. Pellet feed is controlled by the boiler thermostat and the automatic control mechanism. The second part comprises heat exchanger surfaces with two turning chambers, the upper ceramic- lined. The precombustor is surrounded by water batteries forming a common system with the waterways of the boiler. A cast iron access door is mounted on the boiler side for cleaning and supplying secondary air.
Fuel is fed into the furnace through the top door on the front of the precombustor. The door is provided with asbestos gasket. The flue pipe can be cleaned and ceramic lining replaced through the cleaning doors at the upper turning chamber. The arm by which the tilted grill can be moved is on the side of the boiler. The forward water pipe outlet is on the boiler top, while return connection is on the lower part of the boiler, with safety, expansion and filling-draining connections of adequate sizes formed on both. Pipe sleeves for temperature and pressure gauges are provided, also, the connection for boiler thermostat is here. From heat exchanger surfaces, flue gas passes through smoke connections to the chimney. In pellet combustion, the chimney merely functions as smoke outlet, while in wood combustion mode, the smoke connection is connected to the chimney directly or through an exhaust fan if required.
The boiler comes with 50 mm thermal insulation coating and painted sheet envelope. No special foundation for installation is required.
MEGAMORV SFP-60, -120 and -250 boilers are under development.
Type code / SFP-30Rated output (kW) / 15-25
Fuel consumption (kg/h) / 5-8
Heating medium / water
Design temp. difference
forward/return (°C) / 90 / 70
Draught required (Pa) / 20
Chimney size (m) / 120x120
Manufacturing test pressure (bar) / 4
Max. operating pressure (bar) / 2
Boiler efficiency (%)
wood / 80
pellet / 95
Empty weight approx. (kg) / 250
Dimensions
Típusjel / A / B / C / F / IV=V / III / IV / V / VISFP- 30 / 410 / 1150 / 1010 / 120 / NÁ 50 / 1” / 1/2” / 1/2” / 1”
Fig. 2 - The boiler
1 / Combustion chamber / 7 / Ash discharge door / 13 / Burner holding door2 / Turning chamber / 8 / Ash discharge cover / 14 / Danfoss connection
3 / Ash area / 9 / Flue gas outlet / 15 / Hydrometer
4 / Water area / 10 / Flue gas pipes / 16 / Pellet burner
5 / Ignition door / 11 / Forward pipe connection
6 / Cleaning cover / 12 / Return pipe connection
1 – Pellet screw conveyor
2 – Danfoss control
3 – Thermometer
4 – Feed pipe
5 – Pellet burner
6 – Pellet container
7 – Boiler body
A – 410
B – 1150
C – 1010