MATERIAL SAFETY DATA SHEET
SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product IdentifierBlensacide-3
/ [WHMIS Classification]Product Use
Germicide
Manufacturer’s NameCPA Operations, LLC dba Lensco
/ Supplier’s NameStreet Address
2917 E. Hedley Street
/ Street AddressCity
Philadelphia
/ ProvincePA
/ City / ProvincePostal Code
19137 / Emergency Telephone / Postal Code / Emergency Telephone
Date MSDS Prepared
September 9, 2010
/ MSDS Prepared ByMonica Hengstler
/ Phone Number215-743-6860
SECTION 2 — COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Ingredients (specific) / % / CAS Number / LD 50 of Ingredient(specify species and route / LC 50 of Ingredient (specify species)
Didecyl dimethyl ammonium chloride / 30 / 7173-51-5
n-Alkyl / (50%C14, 40%C12, 10%C16)
Dimenthyl benzyl ammonium chloride / 20 / 68424-85-1
WHMIS Symbols]
Potential Health Effects
Skin inflammation, coughing, and nausea.
Dermatitis, other skin inflammation
SECTION 3 — HAZARDS IDENTIFICATION
SECTION 4 — FIRST AID MEASURES
Skin Contact Flush affected area with flowing water for 15 minutes and remove containment clothing.
Eye Contact Immediately flush with flowing water for 15 minutes and call physician.
Inhalation Move to fresh air. Product normally does not cause respiratory irritation.
Ingestion Drink large amounts of milk, eggs whites, gelatin solution or water. Avoid alcohol. Call physician immediately.
SECTION 5 — FIRE FIGHTING MEASURES
Flammable❐Yes x NO / If yes, under which conditions?
Means of Extinction
Water, Dry Chemical, Carbon Dioxide, Alcohol Foam
Flashpoint (° C) and Method100oF(TCC) / Upper Flammable Limit (% by volume) N/A / Lower Flammable Limit (% by volume) N/A
Autoignition Temperature (°C)
N/A
/ Explosion Data — Sensitivity to Impact Not known / Explosion Data — Sensitivity to Static Discharge N/AHazardous Combustion Products
N/A
[NFPA]
SECTION 6 — ACCIDENTAL RELEASE MEASURES
SECTION 7 — HANDLING AND STORAGE
SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION
Exposure Limits❐ ACGIH TLV / ❐ OSHA PEL / ❐ Other (specify)
Specific Engineering Controls (such as ventilation, enclosed process)
Personal Protective Equipment x Gloves ❐ Respirator Rubber or Neoprene / x Eye
Goggles / ❐ Footwear / ❐ Clothing / x Other
If checked, please specify type
Protective apron and face shield.
[ Optional, not required under WHMIS ]
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES
Physical StateLiquid
/ Odor and AppearanceDeep blue, mild mint fragrance
/ Odor Threshold (ppm)Not known
Specific Gravity0.93-0.95 @ 25oC / Vapor Density (air = 1)
Not known
/ Vapor Pressure (mmHg)720 MM Hg @25oC
Evaporation RateNot known
/ Boiling Point (° C)N/A
/ Freezing Point (° C)-20oC
PH
6 to 8 (10% active solution) / Coefficient of Water/Oil Distribution N/A / [Solubility in Water]
100%
SECTION 10 — STABILITY AND REACTIVITY
Chemical Stability / X Yes ❐ No / If no, under which conditions?Incompatibility with Other Substances / ❐Yes x No / If yes, which ones?
Reactivity, and under what conditions? Heats sparks and open flames
Hazardous Decomposition Products Carbon Dioxide, Carbon Monoxide, Ammonia & Nitrous Oxide
Effects of Acute Exposure Not knownEffects of chronic exposure Not known
Section 12 — ECOLOGICAL INFORMATION
[Aquatic Toxicity] Toxic to fish, triple rinse container, do not reuse container. Follow label instructions.
SECTION 13 — DISPOSAL CONSIDERATIONS
Waste Disposal Dispose of in accordance with all Federal, State and Local laws.
SECTION 14 — TRANSPORT INFORMATION
U.S.Department of Transportation
Proper Shipping Name: Cleaning, compound, NOI
Hazard Class: N/A
ID Number: N/A
Packing Group: N/A
Label Statement: N/A
[ Optional, not required under WHMIS ]