MATERIAL SAFETY DATA SHEET PAGE 1 OF 4 DATE PREPARED: MAY 1, 2007
MANUFACTURER: Pioneer Research Corporation 3110 N. 19TH Avenue, Suite 200 Phoenix, Arizona 85015
GENERAL INFORMATION TELEPHONE: 602-230-0012
EMERGENCY TELEPHONE: 800-255-3924
------
SECTION I. IDENTIFICATION OF PRODUCT
------
PRODUCT NAME: FUSE IT HMIS HAZARD CODE
PRODUCT TYPE: Epoxy Resin - Part A - Base 0-Minimal 1-Slight 2-Moderate 3-Serious 4-Extreme
PRODUCT CODE: 100 HEALTH: 3 FLAMMABILITY: 1 REACTIVITY: 0
EQUIPMENT: H (Gloves, Goggles, Apron, Respirator)
------
SECTION II. HAZARDOUS INGREDIENTS
------
HAZARDOUS INGREDIENTS CAS NUMBER % VAPOR PRESSURE
Epoxy 25068-38-6 100 <1 mm/Hg
------
SECTION III. PHYSICAL DATA
------
Boiling Point: 410°F Solubility in Water: No Information
Vapor Pressure (mm Hg): <1 mm/Hg Vapor Density (AIR = 1): Heavier than air
Material VOC: 0 gm/Lt Evaporation Rate: N/A
Appearance and Odor: Clear liquid; mild odor Specific Gravity: 1.1
------
SECTION IV. FIRE AND EXPLOSIVE DATA
------
Flash Point: 400°F Method Used: SFCC
Flammability Limits in Air by Volume: LEL- N/A UEL - N/A (N/A = Not Applicable)
Extinguishing Media: Water, carbon dioxide, dry chemical, foam.
Special Fire Fighting Procedures: Use water fog to cool containers. Wear protective clothing. Fight fire from a safe distance.
Close all valves to the area. Emergency lights must be turned on. Self contained breathing apparatus should be used. Under fire
conditions irritating and/or toxic gases may be present.
Unusual Fire and Explosion: None
------
SECTION V. REACTIVITY DATA
------
Conditions to Avoid: Avoid contact with acids and oxidizing agents
Hazardous Decomposition: Thermal decomposition may produce carbon monoxide, carbon dioxide and oxides of nitrogen
Hazardous Polymerization: May Occur
------
SECTION VI. HEALTH HAZARD DATA
------
Effects of Overexposure:
Acute Overexposure: Irritant to skin, eyes and respiratory tract.
Chronic Overexposure: Prolonged contact with skin can result in dermatitis and swelling.
Eye Contact: Harmful - seek medical attention.
Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Emergency/First Aid Procedures:
Eyes: Flush immediately with large volumes of water for at least 15 minutes. Take to physician for medical treatment
Ingestion: Consult physician or Poison Control Center immediately
Skin Contact: Wash well with soap and water
MATERIAL SAFETY DATA SHEET PAGE 2 OF 4 PRODUCT NAME: FUSE IT
------
SECTION VII. SPILL OR LEAK PROCEDURES
------
Spill Response: Absorb liquid on paper, vermiculite, floor absorbent, or other absorbent material and pick up with shovel. Eliminate
all ignition sources. Stop spill at source.
Product Disposal: Place in closed containers. Do not close containers tightly as gassing may develop in some products.
Carefully incinerate or use sanitary landfill in accordance with local and federal regulations.
------
SECTION VII. SPECIAL PROTECTION INFORMATION
------
Respiratory Precaution: NIOSH approved chemical/mechanical filter designed to remove a combination of particulates and
vapor where concentrations are encountered.
Ventilation: Local exhaust preferable. Mechanical exhaust acceptable.
Protective Gloves: Neoprene or nitrile rubber gloves.
Eye Protection: Chemical safety goggles.
Other: Impervious apron and boots; eye wash.
------
SECTION IX. SPECIAL PRECAUTIONS
------
Precautions to be Taken in Handling and Storage: Practice reasonable care and cleanliness in the handling and storage
of material. Avoid gross contamination of skin. Wash off skin with soap and water.
CONFIDENTIAL
MATERIAL SAFETY DATA SHEET PAGE 3 OF 4 DATE PREPARED: MAY 1, 2007
MANUFACTURER: Pioneer Research 3110 N. Central Avenue, Suite 1200 Phoenix, Arizona 85015
GENERAL INFORMATION TELEPHONE: 602-230-0012
EMERGENCY TELEPHONE: 800-255-3924
------
SECTION I. IDENTIFICATION OF PRODUCT
------
PRODUCT NAME: FUSE IT HMIS HAZARD CODE
PRODUCT TYPE: Epoxy Resin- Part B -Reactor 0-Minimal 1-Slight 2-Moderate 3-Serious 4-Extreme
PRODUCT CODE: 100 HEALTH: 3 FLAMMABILITY: 1 REACTIVITY: 0
EQUIPMENT: H (Gloves, Goggles, Apron, Respirator)
------
SECTION II. HAZARDOUS INGREDIENTS
------
HAZARDOUS INGREDIENTS CAS NUMBER % VAPOR PRESSURE
Tofa-Polyethylene Amine 112-57-2 50 <1
Coal Tar Mixture 8007-45-2 25 5.15 mm/Hg
Fatty Admioamine Resin 68082-29-1 25 <1
------
SECTION III. PHYSICAL DATA
------
Boiling Point: 320-410°F Solubility in Water: No Information
Vapor Pressure (mm Hg): <1 mm/Hg Vapor Density (AIR = 1): Heavier than air
Material VOC: 0 gm/Lt Evaporation Rate: N/A
Appearance and Odor: Black coal tar liquid Specific Gravity: 1.08
------
SECTION IV. FIRE AND EXPLOSIVE DATA
------
Flash Point: 200°F Method Used: SFCC
Flammability Limits: LEL- N/A UEL - N/A (N/A = Not Applicable)
Extinguishing Media: Water, carbon dioxide, dry chemical or foam
Special Fire Fighting Procedures: Use water fog to cool containers. Wear protective clothing. Fight fire from a safe distance.
Close all valves to the area. Emergency lights must be turned on. Self contained breathing apparatus should be used. Under fire
conditions irritating and/or toxic gases may be present.
Unusual Fire and Explosion: None
------
SECTION V. REACTIVITY DATA
------
Stability: Stable
Hazardous Polymerization: May Occur
Conditions to Avoid: Avoid contact with acids and oxidizing agents
Hazardous Decomposition: Thermal decomposition may produce carbon monoxide, carbon dioxide and oxides of nitrogen
------
SECTION VI. HEALTH HAZARD DATA
------
Effects of Overexposure:
Acute Overexposure: Irritant to skin, eyes and respiratory tract.
Chronic Overexposure: Prolonged contact with skin can result in dermatitis and swelling.
Eye Contact: Harmful - seek medical attention.
Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Emergency/First Aid Procedures:
Eyes: Flush immediately with large volumes of water for at least 15 minutes. Take to physician for medical treatment
Ingestion: Consult physician or Poison Control Center immediately
Skin Contact: Wash well with soap and water
MATERIAL SAFETY DATA SHEET PAGE 4 OF 4 PRODUCT NAME: FUSE IT
------
SECTION VII. SPILL OR LEAK PROCEDURES
------
Spill Response: Absorb liquid on paper, vermiculite, floor absorbent, or other absorbent material and pick up with shovel. Eliminate
all ignition sources. Stop spill at source.
Product Disposal: Place in closed containers. Do not close containers tightly as gassing may develop in some products.
Carefully incinerate or use sanitary landfill in accordance with local and federal regulations.
------
SECTION VII. SPECIAL PROTECTION INFORMATION
------
Respiratory Precaution: NIOSH approved chemical/mechanical filter designed to remove a combination of
particulates and vapor where concentrations are encountered.
Ventilation: Local exhaust preferable. Mechanical exhaust acceptable.
Protective Gloves: Neoprene or nitrile rubber gloves.
Eye Protection: Chemical safety goggles.
Other: Impervious apron and boots; eye wash.
------
SECTION IX. SPECIAL PRECAUTIONS
------
Precautions to be Taken in Handling and Storage: Practice reasonable care and cleanliness in the handling and storage
of material. Avoid gross contamination of skin. Wash off skin with soap and water.