INDUSE-2-SAFETY | Kick Off Meeting | Rome, 18-19/09/2014
Agenda
Kick Off Meeting ofINDUSE-2-SAFETY (RFS-PR-13056)
COMPONENT FRAGILITY EVALUATION, SEISMIC SAFETY ASSESSMENT AND DESIGN OF PETROCHEMICAL PLANTS UNDER DESIGN-BASIS AND BEYOND-DESIGN-BASIS ACCIDENT CONDITIONS
Rome, Italy, 18-19 September, 2014
Venue: Department of Engineering, University of Roma Tre
Seminar Room, Via Vito Volterra 62 – Palazzina
00146 Rome, Italy
Organizers: Oreste S Bursi
Phone +39333 4388 749
Email:
Fabrizio Paolacci
Phone +39 329 0570703
Email:
MdShahin Reza
Email:
Partners in brackets are invited to offer presentations on the relevant topics. Remaining partners are free to present and discuss as well.
Thursday, 18September 2014
10.00-10.10Welcome to participants and meeting arrangements
10.10-10.30Overview of the INDUSE-2-SAFETY Project [UNITN].
10.30-10.50Administrative aspects of the project (signed agreement, first pre-payment, report periods, deadlines, etc.) [UNITN].
10.50-11.05Coffee break
11.05-13.00Discussion of WP1: Analysis of “special risk” petrochemical plants subjected to seismic loads.
11.05- 11.45: WP1/Task 1.1 Comparison of international standards for structural safety requirements of petrochemical plants subject to seismic loading and setting a probabilistic approach [UNIROMA3, UTHESSA].
11.45 - 13.00: WP1/Task 1.2Selection of a representative petrochemical plant and sub-plants[IGF, RWTH].
13.00-14.00Lunch Break
14.00-15.15Discussion on WP1
14.00 - 14.30: WP1/Task 1.3Site seismic hazard analysis and input selection for a petrochemical facility[UNIROMA3].
14.30 - 15.15: WP1/Task 1.4Definition of seismic design categories and limit states for main components/systems [UNITN, UNIROMA3].
15.15-16.35Discussion on WP2: FE models and simulations of systems involving complexity/uncertainties.
15.15-15.55: WP2/Task 2.1: Modelling of complex systems by means of detailed FE and dynamic substructuring[RWTH, UNITN].
15.55 - 16.35: WP2/Task 2.2: Development of modelling/simulation tools for simplified analyses of components/systems [LPOOL, UTHESSA].
16.35-16.50:Coffee break
16.50-17.40: WP2/Task 2.3: Simulation of complex systems taking into account dynamic substructuring errors and uncertainties[LPOOL, UNITN].
20:00 Dinner – the place of dinner will be announced during the meeting.
Friday, 19 September 2014
09.30-10.10WP2/Task 2.4: Smart geometric configurations and isolation devices for vibration reduction [RWTH, LPOOL].
10.10-11.00Discussion of WP3: Numerical evaluation of fragilities for support structures, pressure vessels, elevated tanks and heaters.
WP3/Task 3.1: Applications of simplified discrete FE models for simulations of industrial components/systems subject to seismic loads [UNIROMA3, RWTH].
11.00-11.15Coffee break
11.15-12.50Discussion of WP3
11.15 - 12.05: WP3/Task 3.2: Fragility curve evaluation of support structures and components in the decoupled case[UNIROMA3, UNITN, RWTH].
12.05 – 12.50: WP3/Task 3.3: Fragility curve evaluation of support structures and components in the coupled case [UNITN, UNIRM3, RWTH].
12.50-13.00 Date & Place of next meeting, any other business and closure of meeting.