International Standards in process
CD registered
Period from 01 July to 31 July 2014
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 273 / Customer contact centres
ISO/CD 18295-1 / Customer contact centres — Part 1: Requirements for Customer Contact Centres
ISO/CD 18295-2 / Customer contact centres — Part 2: Requirements for organizations employing the services of Customer Contact Centres
PC 283 / Occupational health and safety management systems
ISO/CD 45001 / Occupational health and safety management systems — Requirements
REMCO / Committee on reference materials
ISO/CD TR 16476 / Reference materials - Establishing and expressing metrological
traceability of quantity values assigned to reference materials
TC 6 / Paper, board and pulps
ISO/CD 18522-1 / Paper and board — Automated testing — Part 1: Automated off-line testing of physical properties for CD (cross direction) profiles
TC 20 / Aircraft and space vehicles
ISO/CD 18238 / Space systems — Closed loop problem solving management
ISO/CD 18667 / Space Systems — Requirements for the management of capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme
TC 21 / Equipment for fire protection and fire fighting
ISO/CD 7076-3 / Fire protection — Foam fire extinguishing systems — Part 3: Medium expansion foam equipment
ISO/CD 7076-4 / Fire protection — Foam fire extinguishing systems — Part 4: High expansion foam equipment
TC 22 / Road vehicles
ISO/CD 19364 / Passenger cars — Vehicle dynamic simulation and validation — Steady-state circular driving behaviour
ISO/CD 19365 / Passenger cars — Vehicle dynamic simulation and validation — Sine with dwell stability control testing
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 789-1 / Agricultural tractors — Test procedures — Part 1: Power tests for power take-off
ISO/CD 789-2 / Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity
ISO/CD 789-9 / Agricultural tractors — Test procedures — Part 9: Power tests for drawbar
ISO/CD 789-13 / Agricultural tractors — Test procedures — Part 13: Terms and definitions
ISO/CD 24631-1 / Radiofrequency identification of animals — Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
ISO/CD 24631-2 / Radiofrequency identification of animals — Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
ISO/CD 24631-3 / Radiofrequency identification of animals — Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
ISO/CD 24631-4 / Radiofrequency identification of animals — Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
TC 28 / Petroleum products and lubricants
ISO/CD 15380 / Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HETG, HEPG, HEES and HEPR
TC 33 / Refractories
ISO/CD 18886 / Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
TC 37 / Terminology and other language and content resources
ISO/CD 24617-6 / Language resource management — Semantic annotation framework — Part 6: Principles of semantic annotation (SemAF-Basics)
TC 46 / Information and documentation
ISO/CD 18461 / International museum statistics
TC 58 / Gas cylinders
ISO/CD 19016 / Gas cylinders — Composite construction — Modal Acoustic Emission (MAE) Examination for periodic inspection and testing
TC 61 / Plastics
ISO/CD 294-1 / Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
TC 67 / Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DTR 17177 / Unconventional LNG transfer systems
TC 69 / Applications of statistical methods
ISO/CD 16355-1 / Application of statistical and related methods to New technology and Product Development Process — Part 1: General Principle and Perspective of QFD Process
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 12800 / Nuclear fuel technology — Guide to the measurement of the specific surface area of uranium oxide powders by the BET method
ISO/CD 18557 / Sampling and characterization of sites, land, buildings and infrastructures contaminated by radionuclides or chemical products for remediation purposes
TC 92 / Fire safety
ISO/DTR 12470-1 / Fire-resistance tests — Guidance on the application and extension of results — Part 1: Loadbearing elements and vertical and horizontal separating elements
TC 106 / Dentistry
ISO/CD 2157 / Dental rotary instruments — Nominal diameters and designation code number
ISO/CD 18618 / Dentistry — Interoperability of CAD/CAM Systems
TC 107 / Metallic and other inorganic coatings
ISO/CD 19207 / Classification method of adhesive strength by indentation
TC 108 / Mechanical vibration, shock and condition monitoring
ISO/CD 13373-9 / Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
TC 121 / Anaesthetic and respiratory equipment
ISO/CD 10524-1 / Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices
ISO/CD 10524-2 / Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators
ISO/CD 10524-3 / Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves
ISO 19054:2005/CD Amd 1 / Rail systems for supporting medical equipment — Amendment 1
TC 122 / Packaging
ISO/CD 13355 / Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test
TC 130 / Graphic technology
ISO/CD 12647-7 / Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data
ISO/CD 18620 / Graphic technology — Prepress data exchange — Tone adjustment curves exchange
TC 131 / Fluid power systems
ISO/CD 14743 / Pneumatic fluid power — Push-in connectors for thermoplastic tubes
TC 135 / Non-destructive testing
ISO/CD 18251-1 / Non-destructive testing — Infrared thermography — System and equipment — Part 1: Description of characteristics
TC 147 / Water quality
ISO/CD 10253 / Water quality — Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum
ISO/CD 19820 / Water quality — Determination of the acute toxicity to the marine rotifer Brachionus plicatilis
ISO/CD 19827 / Water quality — Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus
ISO/CD 5667-16 / Water quality — Sampling — Part 16: Guidance on biotesting of samples
TC 150 / Implants for surgery
ISO/CD 18531 / Implants for surgery — Calcium phosphate bioceramics — Characterization of hardening bone paste materials
ISO/CD 19233-1 / Implants for surgery --Total knee-joint prosthesis — Personalized prosthesis — Part 1: Basic bone measurements for design
TC 159 / Ergonomics
ISO/CD 7250-1 / Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
TC 190 / Soil quality
ISO/CD 19204 / Soil quality — Procedure for site-specific ecological risk assessment of soil contamination (TRIAD approach)
TC 193 / Natural gas
ISO/CD 18222 / Olfactory method for the evaluation of odour intensity
ISO/DTR 12748 / Measurement of wet natural gas flow in circular cross-section conduits
TC 199 / Safety of machinery
ISO/DTR 22100-1 / Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards
TC 204 / Intelligent transport systems
ISO/DTR 17427-2 / Intelligent transport systems — Cooperative ITS — Part 2: Framework Overview
ISO/DTR 17427-3 / Intelligent transport systems — Cooperative ITS — Part 3: Concept of operations (ConOps) for 'core' systems
ISO/DTR 17427-4 / Intelligent transport systems — Cooperative ITS — Part 4: Minimum system requirements and behaviour for core systems
ISO/CD TR 17427-5 / Intelligent transport systems — Cooperative ITS — Part 5: Effective approaches to security
ISO/DTR 17427-6 / Intelligent transport systems — Cooperative ITS — Part 6: 'Core system' risk assessment methodology
ISO/DTR 17427-7 / Intelligent transport systems — Cooperative ITS — Part 7: Privacy aspects
ISO/DTR 17427-8 / Intelligent transport systems — Cooperative ITS — Part 8: Liability aspects
ISO/DTR 17427-9 / Intelligent transport systems — Cooperative ITS — Part 9: Compliance and enforcement aspects
ISO/DTR 17427-10 / Intelligent transport systems — Cooperative ITS — Part 10: Driver distraction and information display
ISO/CD TR 17427-11 / Intelligent transport systems — Cooperative ITS — Part 11: Compliance and enforcement aspects
ISO/CD TR 17427-12 / Intelligent transport systems — Cooperative ITS — Part 12: Release processes
ISO/CD TR 17427-13 / Intelligent transport systems — Cooperative ITS — Part 13: Use case test cases
ISO/CD TR 17427-14 / Intelligent transport systems — Cooperative ITS — Part 14: Maintenance requirements and processes
TC 205 / Building environment design
ISO/CD TR 16822 / Building environment design — List of test procedures for heating, ventilating, air-conditioning and domestic hot water equipment related to energy efficiency
ISO/CD 18566-1 / Building environment design — Design, test methods, control and operation of radiant heating and cooling panel systems — Part 1: Definition, symbols, technical specifications and requirements
ISO/CD 18566-2 / Building environment design — Design, test methods, control and operation of radiant heating and cooling panel systems — Part 2: Test facility for thermal output of ceiling mounted radiant heating and cooling panels
ISO/CD 18566-3 / Building environment design — Design, test methods, control and operation of radiant heating and cooling panel systems — Part 3: Design of ceiling mounted radiant panels
TC 206 / Fine ceramics
ISO/CD 17841 / Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate
TC 207 / Environmental management
ISO/CD 14004 / Environmental management systems — General guidelines on principles, systems and support techniques
ISO/CD 14034 / Environmental management — Environmental technology verification (ETV) and performance evaluation
TC 215 / Health informatics
ISO/DTR 18638 / Components of Education to Ensure Health Information Privacy
ISO/DTS 22077-2 / Health informatics — Medical waveform format — Part 2: Electrocardiography
ISO/DTS 22077-3 / Health informatics — Medical waveform format — Part 3: Encoding rules, long term electrocardiogram
TC 217 / Cosmetics
ISO/CD 16128-2 / Guidelines on technical definitions and criteria for natural & organic cosmetic ingredients and products — Part 2: Criteria for ingredients and products
TC 220 / Cryogenic vessels
ISO/CD 21012 / Cryogenic vessels — Hoses
ISO/CD 21028-1 / Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
ISO/CD 24490 / Cryogenic vessels — Pumps for cryogenic service
TC 223 / Societal security
ISO/CD 22316 / Societal security — Organizational resilience — Principles and guidelines
TC 229 / Nanotechnologies
ISO/DTS 18110 / Nanotechnologies — Vocabularies for science, technology and innovation Indicators
TC 232 / Learning services outside formal education
ISO/CD 19366 / Learning services outside formal education - Requirements or generic service standard - Learning services outside formal education
TC 266 / Biomimetics
ISO/CD 18457 / Biomimetics — Biomimetic materials, structures and components
JTC 1 / Information technology
ISO/IEC CD 29110-3-2 / Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity Audit Guide
ISO/IEC CD 29110-5-2-1 / Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-2-1: Management and engineering : Generic profile group : Intermediate profile
ISO/IEC CD 24760-3 / Information Technology — Security Techniques — A Framework for Identity Management — Part 3: Practice
ISO/IEC CD 27034-5 / Information technology — Security techniques — Application security — Part 5: Protocols and application security controls data structure
ISO/IEC CD 27034-6 / Information technology — Security techniques — Application security — Part 6: Security guidance for specific applications
ISO/IEC CD 27035-1 / Information technology — Security techniques — Information security incident management — Part 1: Principles of incident management
ISO/IEC CD 27035-2 / Information technology — Security techniques — Information security incident management — Part 2: Guidelines to plan and prepare for incident response
ISO/IEC CD 27035-3 / Information technology — Security techniques — Information security incident management — Part 3: Guidelines for CSIRT operations
ISO/IEC CD 27050-1 / Information technology — Security techniques — Electronic discovery — Part 1:
ISO/IEC CD 29192-5 / Information technology — Security techniques — Lightweight cryptography — Part 5: Hash-functions
ISO/IEC CD 18477-3 / Information technology — JPEG extensions — Part 3: Lossless coding
ISO/IEC CD 18477-6 / Information technology — Scalable Compression and Coding of Continuous-Tone Still Images — Part 6: IDR Integer Coding
ISO/IEC CD 18477-7 / Information technology — Scalable Compression and Coding of Continuous-Tone Still Images — Part 7: HDR Floating-Point Coding
ISO/IEC CD 23001-12 / Information technology — MPEG systems technologies — Part 12: Sample Variants in the ISO Base Media File Format
ISO/IEC 29199-5:2012/PDAM 1 / Information technology — JPEG XR image coding system — Part 5: Reference software — Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format
ISO/IEC CD 13249-1 / Information technology — Database languages — SQL multimedia and application packages — Part 1: Framework
DIS circulated
Period from 01 July to 31 July 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 / Paper, board and pulps
ISO/DIS 5636-6 / * / Paper and board — Determination of air permeance and air resistance (medium range) — Part 6: Oken method / 2014-10-08
TC 20 / Aircraft and space vehicles
ISO/DIS 7257 / * / Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test / 2014-10-29
(Revision of ISO 7257:1983)
ISO/DIS 16679.2 / Space Systems — Relative motion analysis elements after LV/SC Separation / 2014-09-18
TC 22 / Road vehicles
ISO/DIS 7637-3 / * / Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines / 2014-10-29
(Revision of ISO 7637-3:2007)
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 18564 / * / Machinery for forestry — Noise test code / 2014-10-29
TC 27 / Solid mineral fuels
ISO/DIS 13909-1 / * / Hard coal and coke — Mechanical sampling — Part 1: General introduction / 2014-10-09
(Revision of ISO 13909-1:2001)
ISO/DIS 13909-2 / * / Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from moving streams / 2014-10-09
(Revision of ISO 13909-2:2001)
ISO/DIS 13909-3 / * / Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from stationary lots / 2014-10-09
(Revision of ISO 13909-3:2001)
ISO/DIS 13909-4 / * / Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples / 2014-10-09
(Revision of ISO 13909-4:2001)
ISO/DIS 13909-5 / * / Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams / 2014-10-09
(Revision of ISO 13909-5:2001)
ISO/DIS 13909-6 / * / Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples / 2014-10-09
(Revision of ISO 13909-6:2001)
ISO/DIS 13909-7 / * / Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing / 2014-10-09
(Revision of ISO 13909-7:2001)
ISO/DIS 13909-8 / * / Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias / 2014-10-09
(Revision of ISO 13909-8:2001)
TC 31 / Tyres, rims and valves
ISO/DIS 4000-1 / * / Passenger car tyres and rims — Part 1: Tyres (metric series) / 2014-10-15
(Revision of ISO 4000-1:2013)
TC 34 / Food products
ISO/DIS 11816-2 / * / Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorometric method for cheese / 2014-12-11
(Revision of ISO 11816-2:2003)
ISO/DIS 16577 / * / Molecular biomarker analysis — Terms and definitions / 2014-10-08
TC 39 / Machine tools
ISO/DIS 16090-1 / * / Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements / 2014-12-04
TC 45 / Rubber and rubber products
ISO/DIS 19051 / * / Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content by Micro Duma's Combustion method / 2014-10-03
ISO/DIS 21561-1 / * / Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 1: 1H-NMR and IR method / 2014-10-08
(Revision of ISO 21561:2005, ISO 21561:2005/Amd 1:2010)
TC 58 / Gas cylinders
ISO/DIS 11118.3 / * / Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods / 2014-09-22
(Revision of ISO 11118:1999)
TC 59 / Buildings and civil engineering works
ISO/DIS 19208 / * / Framework for specifying performance in buildings / 2014-10-08
(Revision of ISO 6240:1980, ISO 6241:1984, ISO 7162:1992, ISO 9699:1994)
ISO/DIS 11618 / * / Building construction — Sealants — Classification and requirements for pedestrian walkway sealants / 2014-10-29
TC 76 / Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/DIS 8362-2 / * / Injection containers and accessories — Part 2: Closures for injection / 2014-12-04
(Revision of ISO 8362-2:2008)
TC 92 / Fire safety
ISO 6944-1:2008/DAmd 1 / * / Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1 / 2014-10-15
ISO 10294-1:1996/DAmd 1 / * / Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1 / 2014-10-15
ISO 10294-4:2001/DAmd 1 / * / Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1 / 2014-10-15
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DIS 13506-2.2 / Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases / 2014-09-15
TC 102 / Iron ore and direct reduced iron
ISO/DIS 10203 / * / Iron ores — Determination of calcium — Flame atomic absorption spectrometric method / 2014-10-15
(Revision of ISO 10203:2006)
ISO/DIS 10204 / * / Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method / 2014-10-15
(Revision of ISO 10204:2006)
ISO/DIS 11536 / * / Iron ores — Determination of loss on ignition — Gravimetric method / 2014-10-10
TC 106 / Dentistry
ISO/DIS 17509 / * / Dentistry — Torque transmitter for handpieces used for implantation / 2014-12-25
TC 107 / Metallic and other inorganic coatings
ISO/DIS 11177 / * / Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing / 2014-12-11
ISO/DIS 28721-5 / * / Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterisation of defects / 2014-12-11
ISO/DIS 17668 / * / Zinc diffusion coatings on ferrous products — Sherardizing — Specification / 2014-12-04
TC 110 / Industrial trucks
ISO/DIS 22915-24 / * / Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks / 2014-10-15