International Standards in Process s4
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.CD registered
Period from 01 September to 30 September 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8 / Ships and marine technology
ISO/CD 16145-5 / Ships and marine technology - Protective coatings and inspection method — Part 5: Assessment method for coating damages
TC 22 / Road vehicles
ISO/DTS 21609 / Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 11001-1 / Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 1: U-frame coupler
TC 38 / Textiles
ISO/CD 13629-2 / Determination of antifungal axctivity of textile products — Part 2: Plate count method
TC 44 / Welding and allied processes
ISO/CD 17777 / Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification
TC 58 / Gas cylinders
ISO/CD 17519 / Gas Cylinders — Refillable Permanently Mounted Composite Tubes for Transportation
TC 61 / Plastics
ISO/CD 13927 / Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
TC 67 / Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 18462 / Thermal Well Casing Connection Evaluation Protocol
TC 68 / Financial services
ISO/CD 9362 / Banking — Banking telecommunication messages — Business identifier code (BIC)
TC 71 / Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 13315-2 / Environmental management for concrete and concrete structures — Part 2: System boundary and inventory data
TC 91 / Surface active agents
ISO/CD 17280 / Surface active agents — Determination of the 1,4-dioxane content in surfactants by GC
ISO/CD 17293-1 / Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 1: HPLC method
ISO/CD 17293-2 / Surface active agents — Determination of chloroacetic acid (chloroacetate) in surfactants — Part 2: Ionic Chromatographic method
TC 102 / Iron ore and direct reduced iron
ISO/CD 16742 / Iron ores — Sampling of slurries
TC 108 / Mechanical vibration, shock and condition monitoring
ISO 5349-2:2001/CD Amd 1 / Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1
TC 121 / Anaesthetic and respiratory equipment
ISO/CD 18835 / Inhalational anaesthesia systems — Draw-over vaporizers and associated equipment
ISO/CD 80601-2-72 / Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
TC 131 / Fluid power systems
ISO/CD 3320 / Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 7509 / Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
TC 142 / Cleaning equipment for air and other gases
ISO/CD 16170 / In situ test methods for very high efficiency filter systems in industrial facilities
TC 172 / Optics and photonics
ISO/CD 17411 / Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry
TC 178 / Lifts, escalators and moving walks
ISO/DTR 14799-1 / Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison
ISO/DTR 14799-2 / Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
TC 221 / Geosynthetics
ISO/CD 18325 / Geosynthetics — Index test method for the determination of discharge capacity of prefabricated vertical drains
TC 228 / Tourism and related services
ISO/CD 18065 / Natural Protected Areas - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements
TC 248 / Project committee: Sustainability criteria for bioenergy
ISO/CD 13065 / Sustainability criteria for bioenergy
TC 261 / Additive manufacturing
ISO/CD 17296-3 / Additive manufacturing — Rapid technologies (rapid prototyping) — Part 3: Test methods
JTC 1 / Information technology
ISO/IEC CD 38500 / Corporate governance of information technology
ISO/IEC CD 29157 / Information technology — Telecommunications and information exchange between systems — PHY/MAC specifications for short-range wireless low-rate applications in the ISM band
ISO/IEC CD 23008-1 / Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT)
ISO/IEC CD 19785-1 / Information technology — Common Biometric Exchange Formats Framework — Part 1: Data element specification
ISO/IEC CD 24779-1 / Information technology - Cross jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems — Part 1: General principles
ISO/IEC CD 24779-2 / Information technology - Cross jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems — Part 2: Fingerprint applications
ISO/IEC CD 24779-3 / Information Technology - Crossjurisdictional and societal aspects of implementation of biometric technologies - Pictograms, Icons and Symbols for use with Biometric Systems — Part 3: Vascular applications
DIS circulated
Period from 01 September to 30 September 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 1 / Screw threads
ISO/DIS 16239 / * / Metric series wires for measuring screw threads / 2012-12-19
TC 6 / Paper, board and pulps
ISO/DIS 16065-1 / * / Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method / 2012-12-12
(Revision of ISO 16065-1:2001)
ISO/DIS 16065-2 / * / Pulps — Determination of fibre length by automated optical analysis — Part 2: Unpolarized light method / 2012-12-12
(Revision of ISO 16065-2:2007)
ISO/DIS 23714 / * / Pulps — Determination of water retention value (WRV) / 2012-12-12
(Revision of ISO 23714:2007)
TC 8 / Ships and marine technology
ISO/DIS 28005-1 / * / Security management systems for the supply chain — Electr onic port clearance (EPC) — Part 1: Message structures / 2012-12-10
(Revision of ISO/PAS 28005-1:2012)
ISO/DIS 16304 / * / Ships and marine technology — Marine environment protection — Arrangement and management of port waste reception facilities / 2012-12-27
TC 20 / Aircraft and space vehicles
ISO/DIS 16290 / * / Definition of the Technology Readiness Levels (TRL) and their criteria of assessment / 2012-12-27
TC 22 / Road vehicles
ISO/DIS 14229-6 / * / Road vehicles — Unified diagnostic services (UDS) — Part 6: UDS on K-Line implementation (UDSonK-Line) / 2012-12-27
ISO/DIS 19072-2 / * / Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements / 2012-12-26
(Revision of ISO 19072-2:2007)
ISO/DIS 17479 / * / Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance / 2012-12-19
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 16399 / * / Meters for irrigation water / 2012-12-18
(Revision of ISO/CD 16399-2, ISO/CD 16399-3)
ISO/DIS 11783-10 / * / Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange / 2012-12-07
(Revision of ISO 11783-10:2009, ISO 11783-10:2009/CD Amd 1)
TC 29 / Small tools
ISO/DIS 8404 / * / Tools for moulding — Angle pins / 2012-12-18
(Revision of ISO 8404:2003)
ISO/DIS 8405 / * / Tools for moulding — Ejector sleeves with cylindrical head — Basic series for general purposes / 2012-12-18
(Revision of ISO 8405:1998)
ISO/DIS 23481 / * / Tools for pressing — Cam driver plates / 2012-12-18
(Revision of ISO 23481:2008)
TC 31 / Tyres, rims and valves
ISO/DIS 4000-2 / * / Passenger car tyres and rims — Part 2: Rims / 2012-12-10
(Revision of ISO 4000-2:2007)
TC 34 / Food products
ISO/DIS 11816-1 / * / Milk and milk products — Determination of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks / 2013-02-07
(Revision of ISO 11816-1:2006)
ISO 17372:2008/DAmd 1 / * / Animal feeding stuffs — Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography — Amend. 1 / 2012-12-10
ISO/DIS 12228-2 / * / Determination of individual and total sterols contents — Gas chromatographic method — Part 2: Olive and olive pomace oils / 2013-02-21
(Revision of ISO 12228:1999)
ISO 11056:1999/DAmd 1 / * / Sensory analysis — Methodology — Magnitude estimation method — Amendment 1 / 2012-12-14
TC 35 / Paints and varnishes
ISO/DIS 2813 / * / Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees / 2013-02-28
(Revision of ISO 2813:1994, ISO 2813:1994/Cor 1:1997)
ISO/DIS 13803 / * / Paints and varnishes — Determination of reflection haze on paint films at 20 degrees / 2013-02-28
(Revision of ISO 13803:2000)
TC 42 / Photography
ISO/DIS 18939 / * / Imaging materials — Digital hard copy for medical imaging — Methods of measuring permanence / 2012-12-18
TC 45 / Rubber and rubber products
ISO/DIS 27126 / * / Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification / 2012-12-07
ISO/DIS 27127 / * / Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification / 2012-12-07
TC 58 / Gas cylinders
ISO/DIS 14246.2 / * / Gas cylinders — Cylinder valves — Manufacturing tests and examinations / 2012-11-14
(Revision of ISO 14246:2001)
TC 69 / Applications of statistical methods
ISO/DIS 3534-4 / * / Statistics — Vocabulary and symbols — Part 4: Survey sampling / 2012-12-26
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM DIS 51702 / * / Practice for dosimetry in a gamma irradiation facility for radiation processing / 2012-12-27
(Revision of ISO/ASTM 51702:2004)
ISO/ASTM DIS 51940 / * / Guide for dosimetry for sterile insects release programs / 2012-12-27
(Revision of ISO/ASTM 51940:2004)
ISO/DIS 11665-9 / * / Measurement of radioactivity in the environment — Air: radon-222 — Part 9: Method for determining exhalation rate of dense building materials / 2012-12-14
TC 92 / Fire safety
ISO/DIS 834-10 / * / Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural elements / 2012-12-28
ISO/DIS 834-11 / * / Fire resistance tests — Elements of building construction — Part 11: Specific requirements for the assessment of fire protection to structural steel elements / 2012-12-28
TC 94 / Personal safety -- Protective clothing and equipment
ISO/DIS 11613-1 / * / Protective clothing for firefighters — Laboratory test methods and performance requirements — Part 1: General / 2012-12-26
(Revision of ISO 11613:1999)
ISO/DIS 11613-2 / * / Protective clothing for firefighters — Laboratory test methods and performance requirements — Part 2: Compatibility / 2012-12-19
(Revision of ISO 11613:1999)
ISO/DIS 11613-3 / * / Protective clothing for firefighters — Laboratory test methods and performance requirements — Part 3: Clothing / 2012-12-26
(Revision of ISO 11613:1999)
ISO/DIS 11613-4 / * / Protective clothing for firefighters — Laboratory test methods and performance requirements — Part 4: Gloves / 2012-12-19
ISO/DIS 16900-11.2 / * / Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision / 2012-11-25
TC 107 / Metallic and other inorganic coatings
ISO/DIS 14919 / * / Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions / 2013-02-14
(Revision of ISO 14919:2001)
TC 110 / Industrial trucks
ISO/DIS 22915-16 / * / Industrial trucks — Verification of stability — Part 16: Pedestrian-propelled trucks / 2012-12-28
TC 121 / Anaesthetic and respiratory equipment
IEC 60601-1-10:2007/DAmd 1 / Medical electrical equipment — Part 1-10: General requirements for basic safety and essential performance — Collateral standard: Requirements for the development of physiologic closed-loop controllers — Amendment 1 / 2013-01-12
TC 126 / Tobacco and tobacco products
ISO/DIS 8243 / * / Cigarettes — Sampling / 2012-12-19
(Revision of ISO 8243:2006)
TC 138 / Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 4437-1 / * / Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General / 2012-12-17
(Revision of ISO 4437:2007)
ISO/DIS 4437-2 / * / Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes / 2012-12-17
(Revision of ISO 4437:2007)
ISO/DIS 4437-3 / * / Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 3: Fittings / 2012-12-17
(Revision of ISO 8085-1:2001, ISO 8085-2:2001, ISO 8085-3:2001, ISO 4437:2007)
ISO/DIS 4437-5 / * / Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose / 2012-12-17
(Revision of ISO 4437:2007)
TC 146 / Air quality
ISO/DIS 17734-1 / * / Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives / 2012-12-25
(Revision of ISO 17734-1:2006)
ISO/DIS 17734-2 / * / Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives / 2012-12-25