International Standards in Process s2

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 July to 31 July 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 272 / Forensic sciences
ISO/CD 18385 / Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes
TC 8 / Ships and marine technology
IEC/IEEE CD 80005-2 / Cold ironing — Part 2: High Voltage Shore Connection (HVSC) Systems — Communication Interface Description
TC 17 / Steel
ISO/CD 4995 / Hot-rolled steel sheet of structural quality
ISO/CD 4996 / Hot-rolled steel sheet of high yield stress structural quality
ISO/CD 4997 / Cold-reduced carbon steel sheet of structural quality
ISO/CD 5003 / Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel — Technical delivery requirements
TC 22 / Road vehicles
ISO/CD 13948-1 / Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections
ISO/CD TR 14645 / Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags
ISO/DTS 18506 / Procedure to construct injury risk curves for the evaluation of occupant protection in crash tests
ISO/CD 18580 / Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer
ISO/CD 18243 / Electrically propelled mopeds and motorcycles — Specifications and safety requirements for lithium-ion traction battery systems
ISO/CD 18246 / Electrically propelled mopeds and motorcycles — Principles and requirements for conductive charging — Vehicle safety during charging from mains, grid and/or stationary external energy supply
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 24253-2 / Crop protection equipment — Spray deposit tests of field crop sprayers — Part 2: Spray deposit test in field crop
TC 34 / Food products
ISO/CD 542 / Oilseeds — Sampling
ISO/DTR 12591 / White tea — Definition
TC 35 / Paints and varnishes
ISO/CD 4630 / Clear liquids — Estimation of colour by the Gardner colour scale
ISO/CD 6271 / Clear liquids — Estimation of colour by the platinum-cobalt scale
ISO/CD 8623 / Tall-oil fatty acids for paints and varnishes — Specifications and test methods
TC 37 / Terminology and other language and content resources
ISO/CD 24615-2 / Language resource management — Syntactic annotation framework (SynAF) — Part 2: XML serialization (<Tiger2/>)
ISO/DTS 24617-5 / Language resource management — Semantic annotation framework (SemAF) — Part 5: Discourse structure (SemAF-DS)
ISO/CD 24617-7 / Language resource management — Semantic annotation framework — Part 7: Spatial information (ISO-Space)
ISO/CD 24620-1 / Language resource management — Controlled natural language — Part 1: Basic concepts and general principles
TC 38 / Textiles
ISO/CD 18782 / Textiles — Determination of dynamic hygroscopic heat generation
TC 39 / Machine tools
ISO/DTR 230-11 / Test code for machine tools — Part 11: Measuring instruments suitable for machine tool geometry tests
TC 45 / Rubber and rubber products
ISO/CD 1817 / Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
TC 46 / Information and documentation
ISO/CD 7098 / Information and documentation — Romanization of Chinese
TC 58 / Gas cylinders
ISO/CD 21007-2 / Gas cylinders — Identification and marking using radio frequency identification technology — Part 2: Numbering schemes for radio frequency identification
TC 60 / Gears
ISO/CD 6336-5 / Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
TC 69 / Applications of statistical methods
ISO/DTR 16705 / Selected illustrations of contingency table analysis
TC 76 / Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/CD 15378 / Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
TC 85 / Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 8769 / Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters
ISO/CD 16639 / Surveillance of airborne radioactive substances in the workplace of nuclear facilities
ISO/CD 18310-1 / Measurement of dose equivalent rate and estimation of personal dose equivalent from patients receiving iodine 131 administration after thyroid ablation — Part 1: During the hospitalization
TC 92 / Fire safety
ISO/CD 19702 / Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared spectroscopy (FTIR)
ISO/DTR 24679-3 / Fire safety Engineering — Performance of structure in fire — Part 3: Example of an open car park
TC 94 / Personal safety -- Protective clothing and equipment
ISO/CD 16900-6 / Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical resistance/strength of components
ISO/CD 16900-10 / Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to ignition, flame, radiant heat and heat
ISO/CD 16900-13 / Respiratory protective devices — Methods of test and test equipment — Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing resistance and duration
TC 106 / Dentistry
ISO/CD 13397-5 / Dentistry — Periodontal curettes, dental scalers and excavators — Part 5: Jacquette scalers
TC 110 / Industrial trucks
ISO/CD 11525-2 / Rough-terrain trucks - User requirements — Part 2: Slewing variable-reach trucks
TC 130 / Graphic technology
ISO/CD 18619 / Black point compensation
TC 131 / Fluid power systems
ISO/CD 15171-2 / Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure
ISO/CD 18869 / Hydraulic fluid power — Test methods for couplings actuated with or without tools
TC 133 / Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/CD 8559-1 / Size designation of clothes — Part 1: Anthropometric definitions for body measurement
ISO/CD 8559-2 / Size designation of clothes — Part 2: Primary and secondary dimension indicators
ISO/CD 18163 / Definition of virtual garment for digital fitting
TC 146 / Air quality
ISO/CD 18158 / Workplace air — Terminology
TC 147 / Water quality
ISO/CD 17951-1 / Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA) and spectrometric detection
ISO/CD 17951-2 / Water quality — Determination of fluoride using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA)
ISO/CD 18191 / Water quality — Determination of pH in sea water — Method using the indicator dye m-cresol purple
ISO/CD 11731 / Water quality — Enumeration of Legionella
TC 149 / Cycles
ISO/CD 11243 / Cycles — Luggage carriers for bicycles — Concepts, classification and testing
ISO/CD 14878 / Cycles - Audio warning devices - Technical specification and test methods
TC 210 / Quality management and corresponding general aspects for medical devices
IEC 62304:2006/CD Amd 1 / Medical device software — Software life cycle processes — Amendment 1
ISO/CD 80369-1 / Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements
TC 211 / Geographic information/Geomatics
ISO/CD 19160-1 / Addressing — Part 1: Conceptual model
ISO/CD 19162 / Geographic information — Well known text representation of coordinate reference systems
TC 215 / Health informatics
ISO/DTS 17975 / Health informatics — Principles and data requirements for consent in the collection, use, or disclosure of personal health information
ISO/DTR 80001-2-6 / Application of risk management for IT-networks incorporating medical devices — Part 2-6: Application guidance — Guidance for responsibility agreements
TC 218 / Timber
ISO/CD 738 / Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
ISO/CD 8903 / Broadleaved sawn timber — Nominal sizes
ISO/CD 13061-5 / Physical and mechanical properties of wood - Test methods for small clear specimen — Part 5: Testing in compression perpendicular to grain
ISO/CD 13061-10 / Physical and mechanical properties of wood - Test methods for small clear specimen — Part 10: Determination of impact bending strength
ISO/CD 13061-11 / Physical and mechanical properties of wood - Test methods for small clear specimen — Part 11: Determination of resistance to impact indentation
ISO/CD 13061-12 / Physical and mechanical properties of wood - Test methods for small clear specimen — Part 12: Determination of static hardness
ISO/CD 13061-17 / Physical and mechanical properties of wood - Test methods for small clear specimen — Part 17: Determination of compression parallel to grain
TC 229 / Nanotechnologies
ISO/DTS 16550 / Nanoparticles - Determination of muramic acid as a biomarker for silver nanoparticles activity
TC 234 / Fisheries and aquaculture
ISO/CD 16741 / Traceability of Crustacean products — Specifications on the information to be recorded in farmed Crustacean distribution chains
ISO/CD 18537 / Traceability of Crustacean products — Specifications on the information to be recorded in captured Crustacean distribution chains
ISO/CD 18538 / Traceability of Molluscan products — Specifications on the information to be recorded in farmed Molluscan distribution chains
ISO/CD 18539 / Traceability of Molluscan products — Specifications on the information to be recorded in captured Molluscan distribution chains
TC 266 / Biomimetics
ISO/CD 18458 / Biomimetics — Conception and strategy — Differences between bionic and conventional methods/products
ISO/CD 18459 / Biomimetics — Biomimetic structural optimization
CASCO / Committee on conformity assessment
ISO/IEC DTS 17021-5 / Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset management systems
ISO/IEC DTS 17027 / Conformity assessment — Terminology related to competence of persons used for certification of persons
JTC 1 / Information technology
ISO/IEC 19793:2008/PDAM 1 / Information technology — Open Distributed Processing — Use of UML for ODP system specifications — Amendment 1
ISO/IEC CD 7816-6 / Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange
ISO/IEC CD 18328-2 / Devices on cards — Part 2: Physical characteristics
ISO/IEC CD 29146 / Information technology - Security techniques - A framework for access management
ISO/IEC CD 19763-13 / Information technology — Metamodel framework for interoperability (MFI) — Part 13: Metamodel for forms registration
ISO/IEC PDTR 18121 / Virtual Experiments
ISO/IEC PDTS 20006-3 / Information Technology for Learning, Education and Training — Information Model for Competency — Part 3: Guidelines for the Aggregation of Competency Information and Data
ISO/IEC 19794-2:2011/PDAM 2 / Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 2: XML encoding
ISO/IEC 19794-4:2011/PDAM 2 / Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 2: XML encoding
ISO/IEC CD 30124 / Code of practice for the implementation of a biometric system
DIS circulated
Period from 01 July to 31 July 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 8 / Ships and marine technology
ISO/DIS 18309 / * / Ships and marine technology — Incinerator sizing and selection — Guidelines / 2013-10-24
ISO/DIS 17683 / * / Ships and marine technology — Ceramic weld backing for marine use / 2013-10-31
TC 10 / Technical product documentation
ISO/DIS 129-2 / * / Technical product documentation — Indication of dimensions and tolerances — Part 2: Dimensioning of mechanical engineering drawings / 2013-10-30
ISO/DIS 15519-2 / * / Specifications for diagrams for process industry — Part 2: Measurement and control / 2013-10-04
TC 17 / Steel
ISO/DIS 13933.2 / * / Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emisson spectrometric method / 2013-08-29
ISO/DIS 16573 / * / Method for evaluation of hydrogen delayed fracture resistance of high strength steels / 2013-10-10
TC 20 / Aircraft and space vehicles
ISO/DIS 17255 / * / Space systems — Programme management — Statement of work /
TC 22 / Road vehicles
ISO/DIS 8856 / * / Road vehicles — Electrical performance of starter motors — Test methods and general requirements / 2013-10-03
(Revision of ISO 8856:1995, ISO 8856:1995/Amd 1:1997)
ISO/DIS 27145-6 / * / Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment / 2013-10-03
ISO/DIS 18418-1 / * / Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors /
ISO/DIS 18418-2 / * / Gasoline engines — Medium pressure liquid fuel supply connections — Part 2: Pipe assemblies /
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 13860 / * / Machinery for forestry — Forwarders — Terms, definitions and commercial specifications /
(Revision of ISO 13860:2000)
TC 24 / Particle characterization including sieving
ISO/DIS 27891 / * / Aerosol particle number concentration — Calibration of condensation particle counters / 2013-10-20
TC 31 / Tyres, rims and valves
ISO/DIS 14960-1 / * / Tubeless tyres — Valves and components — Part 1: Test methods / 2013-10-16
(Revision of ISO 14960:2004)
ISO/DIS 14960-2 / * / Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tire valve-test method / 2013-10-16
TC 34 / Food products
ISO/DIS 21415-2 / * / Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten by mechanical means / 2013-10-12
(Revision of ISO 21415-2:2006)
ISO/DIS 18743 / * / Microbiology of food and animal feed — Detection of Trichinella Larvae in meat — Physical method by digestion / 2013-10-05
ISO/DIS 16779 / * / Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs / 2013-10-20