Wikk Industries, Inc.September 2007
PO Box 167
6169B Industrial Court
Greendale, Wisconsin 53129
Toll Free(877) 421-9490
Phone(414) 421-9490
Fax(414) 421-3158
Website
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual—CSI Manual of Practice, Fifth Edition.
The section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.
Section numbers are from MasterFormat 1995 Edition, with numbers from MasterFormat 2004 Edition in parentheses. Delete version not required.
SECTION 08710 (08 71 20)
AUTOMATIC DOOR CONTROLS
Specifier Notes: This section covers Wikk Industries, Inc. “INGRESS’R®” touch-activated automatic door controls. Consult Wikk Industries, Inc. for assistance in editing this section for the specific application.
PART 1GENERAL
1.1SECTION INCLUDES
A.Touch-activated automatic door controls.
1.2RELATED SECTIONS
Specifier Notes: Edit the following list of related sections as required for the project. List other sections with work directly related to this section.
A.Division 8 (08) – Doors and Windows (Openings): Doors.
1.3REFERENCES
Specifier Notes: List standards referenced in this section, complete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used.
A.UL 94 – Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
B.UL 1054 – Standard for Special-Use Switches.
1.4SUBMITTALS
A.Comply with Section 01330 (01 33 00) – Submittal Procedures.
B.Product Data: Submit manufacturer’s product data, including installation instructions.
C.Shop Drawings: Submit manufacturer’s shop drawings, indicating dimensions, materials, components, fasteners, finish, and electrical wiring.
Specifier Notes: Delete finish samples if not required.
D.Samples: Submit manufacturer’s samples of each finish.
E.Warranty: Submit manufacturer’s standard warranty.
1.5QUALITY ASSURANCE
A.Manufacturer’s Qualifications: Manufacturer regularly engaged, for minimum 10 years, in manufacture of automatic door activation equipment.
1.6DELIVERY, STORAGE, AND HANDLING
A.Delivery: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
B.Storage: Store materials in clean, dry area indoors in accordance with manufacturer’s instructions.
C.Handling: Protect materials and finish during handling and installation to prevent damage.
1.7WARRANTY
A.Warranty Period: 18 months.
PART 2PRODUCTS
2.1MANUFACTURER
A.Wikk Industries, Inc., PO Box 167, 6169B Industrial Court, Greendale, Wisconsin 53129. Toll Free (877) 421-9490. Phone (414) 421-9490. Fax (414) 421-3158. Website E-mail .
2.2AUTOMATIC DOOR CONTROLS
A.Touch-Activated Automatic Door Controls: “INGRESS’R”.
1.Description:
a.Knowing-act switch with contoured profile.
b.Allows activation of automatic door from any approach and height level along vertical profile.
c.Tapered profile deflects impact from wheeled conveyances and directs movement into center vertical activation column.
d.Vandal Resistant:
1)No gaps or edges to pry.
2)End cap secured with spanner security screws.
e.Weather Resistant: No gaps for water or ice to penetrate.
2.Dimensions:
a.Overall:
1)Height: 36 inches (914 mm).
2)Width: 6 inches (152 mm).
3)Depth: 1-1/2 inches (38 mm).
b.Center Vertical Activation Column:
1)Height: 36 inches (914 mm).
2)Width: 2-1/2 inches (64 mm).
3.Materials:
Specifier Notes: Specify aluminum or stainless steel touch-activated automatic door controls. Consult Wikk Industries, Inc. for availability of other materials.
a.Aluminum:
1)Anodized aluminum extrusion.
2)Alloy 6063-T5.
3)Nominal Thickness: 3/32 inch (2.4 mm).
b.Stainless Steel:
1)Type 304.
2)Nominal Thickness: 18/19 gauge sheet metal.
3)Center Vertical Activation Column: Formed stainless steel.
4)Base: Clad aluminum.
4.Top End Cap: Black ABS plastic.
5.Switch:
a.Micro-Switch: Single-pole, double-throw, dry-contact, momentary-action micro-switch.
b.Normally open or normally closed contact.
c.Contacts: Silver-cadmium oxide.
d.Rated: 15 amps, 125/250 VAC.
e.Compatible Connectivity: Low-energy automatic door operators.
f.Temperature Rating: Minus 40 degrees F to 221 degrees F (minus 40 degrees C to 105 degrees C).
g.Electrical Life: Unlimited, as connected to low-energy operators.
h.Listed: UL and CSA.
i.Conformance: UL 94 and 1054.
6.Activation:
a.Maximum Horizontal Movement of Center Vertical Activation Column: 1/4 inch (6 mm).
b.Minimum Horizontal Force to Activate: 283 grams at all points on center vertical activation column.
7.Electrical Connections:
Specifier Notes: Specify hard wire or wireless electrical connections.
a.Hard Wire: 2 points of hard-wiring access from flush junction boxes.
b.Wireless: 4-inch by 2-inch by 1/2-inch space beneath top end cap for RF transmitter.
8.Conformance: Americans with Disabilities Act (ADA).
2.3FINISHES
Specifier Notes: Specify finish for aluminum or stainless steel touch-activated automatic door controls. Delete wheelchair logo if not required. Consult Wikk Industries, Inc. for availability of other finishes and symbols.
A.Aluminum: [Clear anodized, Type 204R1, satin. Blue wheelchair logo.] [Dark bronze anodized, Type 304, XDKBZ. White wheelchair logo.]
B.Stainless Steel: Satin US32D. Blue wheelchair logo.
PART 3EXECUTION
3.1EXAMINATION
A.Examine surfaces to receive touch-activated automatic door control.
B.Notify Architect of conditions that would adversely affect installation or subsequent use.
C.Do not begin installation until unacceptable conditions are corrected.
3.2INSTALLATION
A.Install touch-activated automatic door controls in accordance with manufacturer’s instructions at locations indicated on the Drawings.
B.Install touch-activated automatic door controls level and plumb.
Specifier Notes: Specify mounting height of touch-activated automatic door controls.
C.Install touch-activated automatic door controls at mounting height [3 inches (76 mm) above finished floor] [ ______inches ( ______mm) above finished floor] [indicated on the Drawings].
D.Mount touch-activated automatic door controls securely in place to supports with fasteners supplied by manufacturer.
E.Connect switch in accordance with manufacturer’s instructions.
3.3PROTECTION
A.Protect installed touch-activated automatic door controls to ensure that, except for normal weathering, door controls will be without damage or deterioration at time of Substantial Completion.
END OF SECTION
INGRESS’R Automatic Door Controls08710 (08 71 20) - 1