Use of FSC Logo
Overview
Background / This covers the use of the FSC logo supplied by Company, or for use internally, for inclusion on artwork to be used on material printed by Company. Company are committed to abiding by the rules of the Forest Stewardship Council and the following are rules that they impose.Earlier standards may be followed but the standards shown below will be mandatory after 1 January 2011.
Use of logo
Conditions / The following conditions apply to the use of the Company FSC logo:1. The logo may only be used where Company are following the FSC chain of custody system. Use of the logo elsewhere is a breach of the Forest Stewardship Council Trademark and they may take out legal action against such companies.
2. The type, size, colour, shape, clearspace and content rules specified below must be followed.
Types / Only the three types shown in fig.1 may be used, but they may differ in orientation and colour as described below.
CMYK colours
Cyan / 100% / 80%
Magenta / 60% / 18%
Yellow / 100% / 53% / Until clarified by the FSC, assume that either is acceptable.
Blank / 20% / 56%
Clearspace / Ensure that surrounding text or graphics clear the label by a margin indicated by the FSC text in Fig. 5.
Promotional /
Where the FSC label is used off-product on company literature, websites, etc., ensure that the label is similar to that shown in Fig. 6. The rules stated above on colour, etc., apply. Note that the text may vary, but the word “responsible” must be used and “sustainable” not used.
FSC Rules
© Strategic Safety Systems Ltd. 2010 / Doc. No: 5.1 cbpA
Issue: A
Page 2 of 3