Introduction

Industry concerns relating to Natural Roof-Lighting being classified as “brittle” and therefore possibly posing

a danger to foot traffic on a roof, has led to Alsynite NZ purpose developing a heavy duty and high impact roof

lighting system to alleviate these concerns. Aptly named Topglass Ultra-Safe, the product utilises a heavy duty,

woven roving reinforcing system positioned within the resin matrix, thereby providing exceptional strength. Further, the innovative fastening system jointly developed by Alsynite NZ Ltd and the Company's fastening supplier

provides maximum security to any foot traffic across the roof whether this is day, night or in times of restricted visibility.

Key Benefits

• Topglass Ultra-Safe is manufactured utilising heavy duty woven roving enclosed within the resin matrix which

in turn provides a structural capability not normally available with traditional

translucent roofing materials.

• Topglass Ultra-Safe meets the impact strength tests of AS/NZS 4040 and AS/NZS 1562 alleviating the need for

safety mesh to be installed under the sheeting (* see safety) This is of particular benefit to building designers

who face corrosive atmospheres damaging the safety mesh zinc coating

• As the roving matrix runs both

longitudinally and laterally within the sheet, Topglass Ultra-Safe demonstrates

exceptional high impact strength

• A 100 micron Silmar Gel coated surface provides long term light transmission and is supported by a 20 year weather surface structure warranty

• Corrosion resistant when installed in wide range of aggressive environments

• Excellent spanning capabilities

• Topglass Ultra-Safe is marketed as a safe roof lighting system, rather than

just a roof lighting product

Applications

• Educational facilities and Public

Assembly areas where there is a

danger of persons climbing onto a

roof exists

• Fertiliser Plants

• Chemical and Powder-coating Plants

• Wool scouring facilities

• Waste water treatment plants

• Salt Extraction Facilities

• Severe marine environments

• Natural roof lighting where safety

mesh is not installed

• Wood Pulp and Paper Plants

Special Applications

• In very severe corrosive environments the Topglass Ultra –Safe resin system can be fortified using Vinyl Ester to provide maximum protection

• Topglass Ultra-Safe can be supplied

as heavy duty a solid coloured

roofing and cladding material to

replace metal roofing products for

use in corrosive environments.

See also Topclad Page 12

Weight Thickness of sheeting

Topglass Ultra-Safe is supplied as

standard weight of 3660g/m2.

Colours

The standard colour of Topglass Ultra-

Safe is Translucent Clear. Other

pigments are available subject to

minimum order quantity. For solid

colours see Topclad Page 13.

Profiles Topglass Ultra-Safe is available to match most common roofing profiles.

Spanning

Refer Load span graph Page 19

Safety

Whilst Topglass Ultra-Safe is classified as heavy duty, meets the impact test requirements of AS/NZS 4040, and can support foot traffic, long term degradation and or post roof installation impact damage can seriously affect the performance of the sheeting. Therefore, in order to comply with the requirements of AS/NZS1562.3:1996 Part 3 Plastic,

protect the weather surface coating and provide continual structural strength, all GRP roofing products should be planked prior to being walked on

Specification

The translucent sheeting and/or roofing and cladding shall be Topglass Ultra-Safe (insert colour) as manufactured by Alsynite NZ Ltd to comply with AS/NZS 4256.3 JAS-ANZ Certification Licence No 2349. The sheeting shall conform to the nominated roofing and cladding profile and installed in accordance with the requirements of the Alsynite Topglass Ultra-Safe proprietary safety fixing system

Warranty

Topglass Ultra-Safe is supported with a 20 Year weather surface warranty and a 10 year structured loss of lighttransmission warranty. Full warranty conditions and written project warranties are available from Alsynite NZ.