Offer 2007-57
TIMAS INT. LTD.
Page 2 / 2
IMPACT TESTER FOR IZOD-CHARPY METHODS
IMPats15 PENDULUM
The equipment runs Mono-axial Impact Test (Charpy, Izod, Tensile Impact) up to 25J in accordance to ASTM D 256-90 Meth. A, ASTM D 256-90 Meth.B, ASTM D 256-97, ASTM D 6110-97, ASTM D 5942-96 ASTM D 1822, ASTM D 4812, DIN 53753, DIN 53453, DIN 51222, DIN 53448, ISO 180, ISO 179, ISO 8256, BS 2782 Part.3 Meth. 350, BS 2782 Part. 3
Meth. 359. BS 7413, AFNOR T51-111, UNI 6323, UNI 6062.
Main features:
casting main frame, 40 times heavier thanhammers
in case of tests up to 15J if higher hammers (>15J) are
used, this ratio (40 ¸ 1) can be reached through an
additional basement (code 16.10210) safety requirements
according to 89/392/EEC in terms of protection of
the operator fully accomplished
-corrosion resistant epoxy paint
Weight: 120 kg. (without accessories)
Overall dimension: 510x275x680H mm. (without
protection shields and hammer)
Overall dimension: 900x275x870H mm. (with
protection shields and hammer)
Power supply: 220V, 50Hz , singlephase, 0.5kVA
Technical features:
-electronic crosswise levelling of the equipment
-built-in centering system for Charpy specimens
-safety pull release knobs and plexiglass shields (front
and rear), according to 89/392/EEC requirements
-LCD for energy and resilience
-auto-test of main functions when switching on
-control of hammer calibration by displaying the
reduced length and swinging period, printout of
hammer calibration report
-serial and parallel output for PC and printer
-memorization (first-in First-out) and printout for tests (up to 50) with average and standard deviation;
-control environment (Equipment Control Chart), memorization of additional 50 test results for equipment control chart
-multilingual selection (Italian, English, German and French).
-selector between international measuring system and B.U.
-windage correction according to ASTM D 256
-automatic display for potential energy and velocity before impact and related residual angle
Code 1610200
ACCESSORIES
25.00J basement kit (recommended to reach the 40 ¸ 1 ratio between weight of main frame and hammer)
Code 1610210
CHARPY SETTINGS ACCORDING TO ASTM D 5942/96, BS 2782 PART 3 METH. 359, DIN 53453, ISO 179, UNI 6062
Charpy shoulders kit (spacers included) :
2 shoulders to fix on the main structure - distance adjustable as follows :
42, 62, 72, 102 mm
basic shoulders can locate samples 15 mm. high, 10 mm wide
spacers to locate different samples :
1 pair of spacers for samples 4 mm wide, flatwise
3 pairs of spacers
Code 1610271
IZOD SETTINGS ACCORDING TO BS 2782 PART 3 METH. 350, ASTM D 256,
ASTM D 4812, ISO 180, UNI 6323
Fast clamping Izod vice with automatic centering of specimen, shoulders included
Code 1610281
STATISTICAL PROCESSING SOFTWARE FOR IMPats15, complete with cable
(3.5” diskette)
Main features:
- multilingual selection (Ita., Eng., Fre., Ger., Spa.)
- graphic presentation of specimens with notches
- library for referenced Standards (ASTM, ISO, DIN, etc.) and test methods (Izod, Charpy, etc.)
- processing and printout: test data and results, along with statistical graphs
- filing and loading facility of tests
- automatic interfacing to a Thickness Meter (not included) for checking and inputing specimen dimension
- automatic installation
- graphic user interface: via keyboard and via mouse
- for VGA graphic interface
Code 0010501