Igus Helps Formula Student Racing Team Feed Its Need for Speed
igus® helps Formula Student racing team feed its need for speed
When a team of students from the University of Hertfordshire was tasked to make this year’s UH Racing car much lighter than in previous years - at first, the assignment seemed daunting for the students. Fortunately, igus®, one of the team’s sponsors, was more than happy to pitch in, explaining the features and benefits of using complex technical polymer and ultralight metal components in place of the more traditional steel ones.
UH Racing is the UK’s most successful Formula Student team of all time. Founded in 1997, the team of now 30 undergraduate students from the School of Engineering and Technology develops a new vehicle each year; this annual project plays a significant role in the student’s Bachelors or Masters Degree course. And it’s not just engineering focussed, students from other faculties are involved also, dealing with the media and business aspects of running the racing car team, for instance. Impressively, every professional Formula 1 team currently has a UH graduate working in it.
The focus for the UH18 team this year has been to reduce the overall weight of the car and, as a result of rule changes, which required smaller wings, some additional work needed to be done on the vehicle’s aerodynamic performance. A 'Driver in the Loop' motion simulator is available at the University to give students 'real' race car experience and exposure to leading-edge Formula 1 technology.
In a normal road car, the seats are adjusted back and forth on heavy steel rails to accommodate the leg length of the driver. In a racing car, however, the seat position is anchored firmly. This is primarily for safety and centre of gravity reasons, and the position of a pedal box, which contains the brake and accelerator pedals, is adjustable.
“We used the igus® drylin® T linear guide rails and carriages for the mounting mechanism of the pedal box,” said UH Racing team member and final year Engineering student, Ashley Craig. “These were then modified to fit a quick release pin, so that they can be fixed in position and the pedal box moved either towards or away from the seating position to accommodate the 5th percentile female to the 95th percentile male.”
Igus® drylin® TS-04-15 low-profile rails were used in conjunction with TW-04-15 miniature carriages for the mounting mechanism of the pedal box. Weighing only 330g per metre length, the cast zinc chromate carriage and hard-anodized aluminium rails are maintenance free. The sliding elements are made of wear-resistant iglidur® J material, a complex technical polymer that is self-lubricating and therefore also requires no maintenance. Although the drylin® T linear guide systems were specially developed for automation and handling systems, these rugged linear guides can accommodate the most diverse - and also extreme - environments. The high service life of iglidur® W300 flange bearing was also utilised, again giving the important advantage of weight reduction, which is crucial in motorsport.
The race car is now undergoing an extensive testing program, using facilities at the University of Hertfordshire’s rolling road and Park and Ride to shakedown the car. The team will also be heading to Bruntingthorpe Airfield and Proving Ground shortly to allow for more extensive testing and really put the car through its paces in preparation for competition.
The first trial for the new UH18 will be at the Formula Student event in July, being held at Silverstone, where over 3000 students from around the world will be taking part. In August, the team will move on to the Hockenheim racing circuit to take part in Formula Student Germany.
All in all, the technical polymer and lightweight metal components supplied by igus® have contributed to a 2kg weight reduction of the vehicle. “We wish the UH Racing team continued success,” says Rob Dumayne, director, igus®.
– Ends –
About igus®:
Based in Northampton in the UK, and with global headquarters in Cologne, Germany, igus® is the largest producer of injection moulded polymer bearings and reinforced plastic cable carriers in the world. Product lines include industry-leading e-chain cable carriers, chainflex continuous-flex cables, iglidur® plastic plain bearings, igubal® spherical bearings, drylin® linear bearings and guide systems. The company has 26 subsidiaries across 31 countries and employs more than 2150 people worldwide.
With plastic bearing experience since 1964, cable carrier experience since 1971 and continuous-flex cable since 1989, igus® provides the right solution based on 100,000 products available from stock with between 1,500 and 2,500 new product introductions each year
For more information, please call igus® directly on 01604 677240 or visit the website at: Follow us at watch our videos at connect with us at and see our brand new blog on blog.igus.co.uk.
igus®, e-chain®, readychain®, chainflex®, iglidur®, igubal®, drylin® and manus® are registered trademarks.
For further information, please contact:
Justin Leonard, igus®
Tel: 01604 677240
Email:
Rob Dumayne, igus®
Tel: 01604 677240
Email:
Julia Swan, Technical Publicity
Tel: 01582 393122
Email: