Transparent Technologies Private Limited

Head office & Works: W – 280, ‘S’ Block,

MIDC, Bhosari, Pune - 411026

Tel. no. 91 – 20 –27122817

Fax No. 91 – 20 – 27121613 / 2421 2533

E-mail:,

Fluidized Bed Dryer Enquiry Form
Date :
1 / Client Information
1.1 / Company’s Name & Address
1.2 / Contact Person
1.3 / Contact Details
Tel : / Fax :
Mobile : / E-mail :
1.4 / Customer Profile / Actual User( ) Consultant( )
1.5 / Type of Offer Needed / Budgetary( ) Firm( )
1.6 / If Firm , Finalisation Before
1.7 / Delivery / Commissioning required Before
2 / Input Information
2.1 / Name of the product
2.2 / Product Cost / per kg
2.3 / Chemical Formula of the Material
( if available )
2.4 / Solvent Used ( Water or other, specify )
2.5 / Wet Material nature
2.6 / Initial Moisture / Solvent Content / %
2.7 / Nature of initial Moisture / Free [ % ] Bound [ % ]
2.8 / Feed temperature / °C
2.9 / Melting Point of Solids / °C
2.10 / Softening Point of Solids / °C
2.11 / Degradation Temp. of material ( Temp. to which feed can be heated without changing it's properties ) / °C
2.12 / Bulk Density of feed / kg / m3
2.13 / Feed Particle size distribution
2.14 / Nature of feed (Specify Yes / No) / Sticky[ ] Corrosive[ ] Abrasive[ ]
Inflammable [ ] Explosive [ ]
Electrically conductive [ ]
Injurious to Health [ ]
Heat sensitive [ ] Toxic [ ]
2.15 / Can product be brought into direct contact with Flue gases ? / YES / NO
3 / Dry Powder Properties
3.1 / Moisture acceptable in Powder / Lowest % , Highest %
3.2 / Bulk Density of Powder / kg / m3
3.3 / Nature of Dry Powder / Hygroscopic ( Yes / No )
3.4 / Specific Heat Capacity of Powder / Kcal / kg 0C
3.5 / Thermal Conductivity of Powder / W/m 0C
3.6 / Angle of repose / degree
4 / Dryer Capacity Data
4.1 / Required Dry powder output / Kg / Hr
Note: Considering equipment is running contineously for 24 hrs a day to achieve required capacity
5 / Material of Construction for Dryer / AISI 316 [ ] AISI 304 [ ]
Carbon Steel [ ] Other - Pl Specify
6 / Utilities available
6.1 / Steam / BarG, Kg/hr
6.2 / Thermic Fluid / oC Kg/hr
6.3 / Compressed air / Bar G Nm3/hr
6.4 / Hot air / oC m3/hr
6.5 / D G set / KVA
6.6 / Flue Gas / oC m3/hr
7 / Fuel to be used / LPG , HSD ,LDO
Any Other ( plz specify )
8 / Energy Cost ( in your currency )
8.1 / Electricity / Rs / KWH
8.2 / Steam / Rs / Kg
8.3 / Solid / liq. Fuel / Rs / Kg
8.4 / Gaseous Fuel / Rs / Kg
8.5 / Compressed Air / Rs / Nm3
9 / Installation Data
9.1 / Location
9.2 / Elevation above Mean Sea Level / mtr
9.3 / Maximum Relative Humidity / %
9.4 / Ambient Temperature / OC Max.
OC Min.
10 / Present drying procedure ( if any )
10.1 / Present procedure of drying feed
10.2 / Present procedure of powder recovery
10.3 / Manpower employed / Persons / shift
No. of shifts / days
10.4 / Present output of Drying Process / kg / hr
10.5 / Present Drying cost (approx.) / per kg
Please send samples of feed and dry powder ( 250 gm each ) along with filled enquiry form
Kindly note that accuracy and completeness of our Offer depends on the accuracy of information furnished by you in the Questionnaire, as this forms the basis of design.

Transparent Technologies Pvt. Ltd., Page1 of 3