Honeywell HD31H(WH)960H 700 TVL TDN Indoor/Outdoor IR Ball CameraGuide Specifications in CSI Format

Rev A

SECTION 282329

960H 700 TVL TRUE DAY/NIGHT RUGGED INDOOR/OUTDOOR IRBALL CAMERA

PART 1 GENERAL

1.1SECTION INCLUDES

  1. Provide a 960H ultra-high resolution, 700 TVL, true day/night, indoor/outdoorweatherproof,IR ball camerawith varifocal manual iris lens for video surveillance, includingdesign, supply, installation, and commissioning.

1.2RELATED SECTIONS

NOTE TO SPECIFIER:Include related sections as appropriate if video surveillance system is integrated to other systems.

  1. Section 260500 – Common Work Results for Electrical, for interface and coordination with building electrical systems and distribution.
  2. Section 280513 – Conductors and Cables for Electronic Safety and Security, for cabling between system servers, panels, and remote devices.
  3. Section 280528 – Pathways for Electronic Safety and Security, for conduit and raceway requirements.
  4. Section 282323 – Video Surveillance Systems Infrastructure.
  5. Section 282329 – Video Surveillance Remote Devices and Sensors.

1.3REFERENCES

  1. Reference Standards:Provide systems that meet or exceed the requirements of the following publications and organizations as applicable to the work of this section:
  2. Canadian ICES-003
  3. Canadian Standards Association (CSA)
  4. Conformity for Europe (CE)
  5. Electronic Industry Association (EIA)
  6. Federal Communications Commission (FCC)
  7. Joint Photographic Experts Group (JPEG)
  8. National Television Systems Committee (NTSC)
  9. Phase Alternating Line (PAL)
  10. Underwriters Laboratories Inc. (UL)

1.4SYSTEM DESCRIPTION

  1. ThePerformance Series true day/night indoor/outdoor IR ball camera shall use a weatherproof, vandal-resistantindoor/outdoorenclosure that can be mounted quickly to a ceiling or wall.
  2. Theindoor/outdoor IR ball camera shall have a 1/3" 960H CMOS imager to capture 700 TV lines of ultra-high resolution video and features digital noise reduction. Forty-two (42) integratedinfrared LEDs provide true day/night operation and a2.8–12 mm varifocal manual iris lens covers a wide range of viewing angles. The camera accepts 12 V DC power input.

1.5SUBMITTALS

  1. General: Submittals shall be made in accordance with the Conditions of the Contract and Submittal ProcedureSection.
  2. Manufacturer’s Product Data:Submit manufacturer’s data sheets indicating systems and components proposed for use, including instruction manuals.
  3. Shop Drawings:Submit complete shop drawings including connection diagrams for interfacing equipment, list of connected equipment, and locations for major equipment components.
  4. Record Drawings:During construction maintain record drawings indicating location of equipment and wiring.Submit an electronic version of record drawings not later than Substantial Completion of the project.
  5. Operation and Maintenance Data:Submit manufacturer’s operation and maintenance data, customized to the system installed.Include system and operator manuals.
  6. Field Tests:Submit results of field testing of every device including date, testing personnel, retesting date (if applicable), and confirmation that every device passed field testing.
  7. Maintenance Service Agreement:Submit a sample copy of the manufacturer’s maintenance service agreement, including cost and services for a one year period for Owner’s review.Maintenance shall include, but not be limited to, labor and materials to repair the system, tests and adjustments, and regular inspections.

1.6QUALITY ASSURANCE

  1. Manufacturer:Minimum ten (10) years experience in manufacturing and maintaining video surveillance systems.Manufacturer shall provide toll-free technical assistance and support available 24/7.
  2. Manufacture Location: Provide equipment assembled in China.
  3. Installer:Minimum two (2) years experience installing similar systems, and acceptable to the manufacturer of the video surveillance system.
  4. Regulatory Requirements:
  5. Emissions:FCC, Part 15B, Class B
  6. Environmental Requirements:
  7. Operating Temperature:-40°F to 140°F (−40°C to60°C)
  8. Storage Temperature: −4°F to 149°F(−20°C to 65°C)
  9. Power Requirements: Input voltage shall be 12 V DC.

1.7DELIVERY, STORAGE, AND HANDLING

  1. Deliver materials in manufacturer’s labeled packages.Store and handle in accordance with manufacturer’s requirements, in a facility with environmental conditions within recommended limits.

1.8WARRANTY

  1. Manufacturer’s Warranty:Submit manufacturer’s warranty of three (3) years from the manufacture date code under normal use and service for the video surveillance system.

PART 2 PRODUCTS

2.1MANUFACTURERS

  1. Camera Manufacturer: Honeywell HD31H Performance Series true day/night 700 TVL indoor/outdoor IR ball camera,
  2. Accepted Part Numbers:
  3. HD31H –IR Ball Camera, 1/3" 960H CMOS, 700 TVL, 2.8-12 mm VFMI Lens, 42 IR LEDs, 12 V DC, Gray, NTSC
  4. HD31WH –IR Ball Camera, 1/3" 960H CMOS, 700 TVL, 2.8-12 mm VFMI Lens, 42 IR LEDs, 12 V DC, White, NTSC
  5. HD31HX – IR Ball Camera, 1/3” 960H CMOS, 700 TVL, 2.8-12 mm VFMI Lens, 42 IR LEDs, 12 V DC, Gray, PAL

2.2SYSTEM COMPONENTS

  1. Ballcamera and cabling.

2.3OPERATIONAL REQUIREMENTS

  1. The Performance Series indoor/outdoor IR ball camera system shall meet or exceed the following camera specifications:
  2. Image Sensor:1/3-inch960H CMOS
  3. Total Pixels:NTSC: 976 (H) × 496 (V)
  4. Horizontal Resolution:700 TVL
  5. Lens Type:2.8–12 mm varifocal manualiris lens, F1.4
  6. Angle of View: 80° wide 27.2° tele
  7. IR LEDs: 850 nm, 42 LEDs
  8. IR Illumination Distance: Up to 100ft. (30 m), depending on scene reflectance
  9. Minimum Illumination: 0.14 lux @ F1.4 (AGC on) / 0 lux (IR LEDson)
  10. Video Output: Composite, 1.0 VP-P, 75 ohms
  11. Shutter Speed: 1/60 – 1/100,000 seconds (NTSC)
  12. Signal-to-NoiseRatio:62 dB or more(AGC off)
  13. Synchronization: Internal
  14. The indoor/outdoor IR ball camerashall providetrue day/night functionality with IR illumination. When ambient light drops below a defined threshold, the 42 IR LEDs activate, and the camera changes automatically from color to black and white.
  15. The indoor/outdoor IR ball camera shall provide 12 V DC operation.
  16. The indoor/outdoor IR ball camera shall offer 3-axis movement for precise camera positioning.
  17. The indoor/outdoor IR ball camera housing shall consist of die cast aluminum with eitherdark gray finish (HD31H, HD31HX) or white finish (HD31WH).
  18. The indoor/outdoor IR ball camera housing shall be weatherproof (IP66) and vandalresistant.

2.4SYSTEM HARDWARE

  1. The indoor/outdoor IR ball camera shall have the following mechanical specifications:
  2. Unit Dimensions (L×W×H): 5.3"×4.9"×3.6"(134.3×123.9×91.5 mm)
  3. Unit Weight: 1.26lb (0.57 kg)
  4. Video Output: BNC connector (75 ohms)
  5. Power Input: 2.1 mm plug
  6. The indoor/outdoor IR ball camera shall have the following electrical specifications:
  7. Voltage: 12 V DC
  8. Input Range: 12 V DC ± 10%
  9. Power Consumption: 5.0W maximum (IR LEDs on); 2.0 W maximum (IR LEDs off)
  10. The indoor/outdoor IR ball camera shall be designed to meet the following environmental conditions:
  11. Operating Temperature:-40°F to 140°F (–40°C to 60°C)
  12. Storage Temperature: –4°F to 149°F (–20°C to 65°C)
  13. Emissions: FCC,Part 15B, Class B

2.5MANUFACTURER SUPPORT

  1. Manufacturer shall provide customer service, pre-sales applications assistance, after-sales technical assistance, access to online technical support, and online training using Web conferencing.
  2. Manufacturer shall provide 24/7 technical assistance and support by means of a toll-free telephone number at no extra charge.

PART 3 EXECUTION

3.1EXAMINATION

  1. Examine site conditions prior to installation.Notify Architect and Owner in writing if unsuitable conditions are encountered.Do not start installation until site conditions are acceptable.

3.2INSTALLATION

  1. All components of the camera system shall be thoroughly tested before shipping to the project location.
  2. Camera system shall be installed, programmed, and tested in accordance with manufacturer’s installation instructions.
  3. Coordinate interfaceswith Owner’s representative where appropriate.
  4. Provide conduit, cable, and wire for complete and reliable installation. Obtain Owner’s approval for exact location of the camera and allboxes, conduit, cable, and wiring runs prior to installation.
  5. Install conduit, cable, and wire parallel and square with building lines, including raised floors areas.Do not exceed 40 percent fill in conduits.Gather wires and tieto create anorderly installation.
  6. Coordinate with other trades to provide proper sequencing of installation.

3.3FIELD COMMISSIONING AND CERTIFICATION

  1. Field Commissioning:Test ballcamera system as recommended by manufacturer, including the following:
  2. Conduct complete inspection and testing of equipment, including verification of operation with connected equipment.
  3. Test devices and demonstrate operational features for Owner’s representative and authorities having jurisdiction, as applicable.
  4. Correct deficiencies until satisfactory results are obtained.
  5. Submit written copies of test results.

3.4TRAINING

  1. Conduct on-site system administrator and security/surveillance operator training, with the number of sessions and length of sessions as recommended by the video surveillance system manufacturer.Training shall include, but not limited to, camera administration, provisioning, configuration, operation, and diagnostics.

END OF SECTION

28 23 29-1