Proceedings of AMPE, 12-13, 2017, Karachi, Pakistan
Guidelines for the preparation of A Maximum of 10 pageSMANUSCRIPT
A.B. Author1,* and C.D. Author2
1lChemicalEngineering Department, NED University of Engineering & Technology, Karachi, Pakistan
2Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Pakistan
*Corresponding author. Tel.: +###-########; fax: +###-########
E-mail address: (A.B.Author)
Abstract
This MS Word template provides guidelines for the preparation of camera-ready manuscript for publication in the proceedings of Advanced Materials and Process Engineering Conference (AMPE 2015). In order to ensure uniform style throughout the proceedings, authors are advised to prepare the paper strictly according to the instructions set below. Formats for Equations, Tables and References are also presented. The manuscript you submit will appear unedited in the conference Proceeding, therefore it is essential that it is error free. It is advisable to have at least one colleague, PREFERABLY an English Faculty, proof read it before posting.
Keywords: Guide;format;figures;tables
Proceedings of AMPE, 12-13, 2017, Karachi, Pakistan
1introduction
Your paper should be submitted on A4 (210mmx297mm) page and typed in a two-column format as shown in this manuscript template. The text should fit exactly into the type area. The correct settings of margins are illustrated in Figure 1. Page numbers should not be inserted on any page.
2Format
The paper title should be typed in capital letters, centered and placed 1.5 cm from the top of the first page (Style: Paper Title). Use Arial Narrow 14 point size. Leave 12 point space before and 12 point space after the title. The simplest way of formatting the fonts for different texts in MS Word is to select the text and click required Style in the toolbar. On the other hand, select the text; on the Format menu click Style. In the style box, click the Style of the text to be applied (e.g. Paper Title, Abstract Heading, etc.), and then click Apply. All the styles that may be required to prepare this manuscript have already been created in this template for the authors convenience. Details of the Styles used in this template are given in Table 1.
Table 1. Style and Font Size
Style / Font Size / UsagePaper Title / Arial, Bold face, 14point, All Caps, Centered / Title of the Paper
Author / Arial, Bold face, 12point, Centered / Author Name
Affiliation
Body Text / Times New Roman, 12point / Author address & email
Heading 1 / Arial, Bold face, 12point, All Caps, Left, numbered / First Order Heading
Heading 2 / Arial, Bold face, 12point, left, numbered / Second Order Heading
Heading 3 / Arial, Italic, 12point, Left / Third Order Heading
Table Heading / Arial,12point, Centered / Table Heading
Equation / 12point, Centered / Equation
Body Text / Times New Roman, 12point, Justified / Body Text
Page Header / Times New Roman, 12point, Italic / Header
2.1Headings
All headings should commence at the left-hand margin of the column, except Abstract. The contents of abstract should be entered using Times New Roman 12 point font size (Style: Body text). The abstract should be concise and limited to 200 words. The author should select four keywords to supplement the title to reflect the subject matter.
First Order Headings
The main headings should be typed in capital letters, bold faced, and numbered (Style: Heading 1).
Second Order Headings
Second order headings should be typed with the first character of every word capitalised, bold faced, and numbered (Style: Heading 2).
Third Order Headings
Third Order headings should be typed with the first character of every word capitalised, and italised (Style: Heading 3). These headings should not be numbered.
2.2Figures and Tables
Locate the figures close to the first reference to them in the text and number them consecutively, making no distinction between diagrams and photographs. Figure caption should be placed immediately below the figure. Type figure caption as follows: Figure 1. Caption (Style: Figure Heading). Example of a Figure is shown below.
Figure 1. Paper Layout
Figures and/or photographs should be in black and white only since proceedings will be printed in black. Locate tables close to the first reference to them in the text and number them consecutively. Table caption (Style: Table Heading) should be placed immediately above the table, and type as follows: Table 1. Caption, as illustrated in Table1. Figure and Table can occupy either one or two columns.
2.3Equations
Enter equations using MS Equation editor and number the equations consequently (Style: Equation). After entering the equation, press tab and enter the equation number within parentheses. Refer to equations by this number in the text. Equation (1) below is shown as an example.
Taylor’s tool life model is,
(1)
where, V is the cutting speed and T is the tool life. The model constants n and C depend on the tool and work material pair.
Citation of the references should be made within square brackets. For example, book reference [1] and other references [2,3] are listed at the end of the paper.
3General
Please send your manuscript data files via e-mail attachment. If you don’t have the possibility to send the paper via e-mail orif the files are too big, please send the data files on a CD.No hardcopy is needed.
ACKNOWLEDGEMENTS
The Conference secretary would like to thank in advance the authors for preparing the paper according to this template.
REFERENCES
[1] M. Akhtar and R. Khan, Title of the book, John-Wiley, 2015.
[2] A. Raza, Title of the conference paper, Proc. Int. Conf. On Clean energy and sustainability (CES 2015), Pakistan 2015.
[3] N. Rehman, Title of journal paper, Journal of Materials Processing Technology, 10(2), 1-11, 2015.
Please sendyour manuscript before submission deadline through the conference’s website given below: