F. Author
<Guidelines for Authors>
Manuscript of Technical Digest of IMID has 4 page limits. Each manuscript must include an abstract not exceeding 50 words, and a list of no more than five key words. The manuscript is recommended to have formal sections of regular papers, i.e., introduction, experimental procedures, results, discussions, conclusions, and references. However, depending on contents of manuscript, it may not include all the sections listed above. Total number of figures and tables are recommended not to exceed more than 10 in total. Also, the number of references is may not exceed 15.
The Title should be concise and informative enough to facilitate understanding of the paper. Acronyms should not be in the Title.
Authors' names should preferably be written in full name for all publications to facilitate indexing and avoid ambiguities.
The Abstract is limited to about 50 words and be self-contained as an index and summary. It should provide the conclusions and all results of general.
Equations should be neatly typed, punctuated and aligned to bring out their structure, and numbered on the right. Mathematical operation signs indicating continuity of the expression should be placed at the left of the second and succeeding lines. Use × rather than a centered dot, except for scalar products of vectors. The solidus (/) should be used instead of built-up fractions in running text, and in display wherever clarity would not be jeopardized. Use "exp" for complicated exponents.
Notation must be legible, clear, compact, and consistent with standard usage.
A Reference section should follow the text. References should be listed in the order in which they appear in the paper. Complete information is essential. Reference should be made to the full list of authors rather than to first author followed by an abbreviation such as et al. References to periodical papers must include (as applicable) the authors' names, paper title, periodical title, volume number, page range, and year of publication. Book references should include (as applicable) authors' names, chapter/ section title, page range, book title, editors' names, publisher's name and location, and year of publication. Papers from proceedings should include the location and date of the relevant meeting, as well as the name and location of the publisher and the year of publication
Formats of typical references are as follows:
1. G. W. Scherer, J. Am. Ceram. Soc., 73[11], 3 (1990).
2. H. J. Kim and J. S. Im, SID’05 Technical Digest, Vol. 1, p401 (2005).
3. O.V. Mazurin and E.A. Porai-Koshits (eds.), Phase Separation in Glass, North-Holland, Amsterdam, p21 (1984)
4. D.L. Eaten. Porous Glass Support Material, US Patent no. 904, 422(1975).
5. K. D. Hong, IMID’06 Technical Digest, p.877 (2006).
• IMID 2007 DIGEST
F. Author
(2 line spacing)
• IMID 2007 DIGEST
F. Author
Abstract
This template provides you with an example of the layout and style which we wish you to adopt for the preparation of your manuscript of IMID/IDMC/ASIA DISPLAY 2008 Technical Digest. We are going to use this file to publish the Digest. The abstract should be less than 50 words.
(2 line spacing)
1. Introduction
(1 line spacing)
Briefly describe the goals of your work, and give background information at the introduction section using Times New Roman Font 11. The heading of a section should be in Times New Roman 12-point bold with only the initial letters capitalized. Please respect the maximum number of pages allowed for the Technical Digest of IMID/IDMC/ASIA DISPLAY 2008 is 4 pages.
We recommend to use MS Word processor and to follow the format provided in this template; In A4 paper, left and right margin are 16mm respectively, 8mm middle margin, 35mm top margin, and 27mm bottom margin. When a paragraph starts, give an indent of 2 characters. In the last page of the article, make the length of left and right stage to be equal approximately.
Make use of the maximum stipulated length apart from the following two exceptions (i) do not begin a new section directly at the bottom of a page, but transfer the heading to the top of the next column; (ii) you may exceed the length of the text area by one line only in order to complete a section of text or a paragraph.
(2 line spacing)
2. Experimental
(1 line spacing)
We normally recommend the use of 1.0 (single) line spacing. However, when typing complicated mathematical text it is important to increase the space between text lines in order to prevent sub- and super-script fonts overlapping one another and making your printed matter illegible.
Tables and illustrations should be originals or sharp images. They should be arranged throughout the text preferably being included on the same page as they are first discussed. They should have a self-contained caption and be positioned in center margin within the column. If they do not fit into one column they may be placed across both columns in which case place them at the top or at the bottom of a page.
(2 line spacing)
3. Results and discussion
(1 line spacing)
Equations are placed in center and should be preceded and followed by one line of white.
(1 line spacing)
(1)
(1 line spacing)
If they are numbered, make sure that they are numbered consecutively. Place the numbers in parentheses. Flush with the right-hand margin of the column and level with the last line of the equation.
Tables should be presented in the form shown in Table1. Their layout should be consistent throughout. Horizontal lines should be placed above and below table headings, above the subheadings and at the end of the table above any notes.
(1 line spacing)
TABLE 1. Periodic table of elements
B / C / D / EValue / 1 / 2 / 3 / 4
(1 line spacing)
All illustrations should be clearly displayed by leaving at least a single line of spacing above and below them. When placing a figure at the top of a page, the top of the figure should be at the same level. At the last page of the manuscript, make sure that the column have the same length as shown in this template.
(2 line spacing)
Fig. 1. Good quality figure with clear lettering.
(2 line spacing)
Fig. 2. SEM micrographs of ZnO nano-rods coated with MgO.
(2 line spacing)
Photographs and figures must always be sharp originals and rich in contrast. They should be embedded in the manuscript.
(2 line spacing)
4. Summary
(1 line spacing)
This template is for IMID/IDMC/ASIA DISPLAY 2008 Technical Digest. Your file should be submitted via our home page below.
(http://www.geni-pco.com/imid2008/default.php).
If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.
(2 line spacing)
5. References
(1 line spacing)
1. G. W. Scherer, J. Am. Ceram. Soc., 73[11], 3 (1990).
2. H. J. Kim and J. S. Im, SID’05 Technical Digest, Vol. 1, p401 (2005).
3. O.V. Mazurin and E.A. Porai-Koshits (eds.), Phase Separation in Glass, North-Holland, Amsterdam, p21 (1984)
4. D.L. Eaten, Porous Glass Support Material, US Patent no. 904, 422(1975).
5. K. D. Hong, IMID’06 Technical Digest, p.877 (2006).
• IMID 2007 DIGEST