GPS Watch Instruction Manual
Please carefully read the instructions of the smart watch before using.
1.Operation Instruction :
1.1Open the battery, install a micro SIM card
Note: the SIM card must have 2G GPRS net,can make call, can receive message, must close the PIN code.
1.2 Put in the battery and install the back cover.
1.3 Press the switch button,switch it on.
1.4 Download the app:
1.4.1Scan the manual QR to download.
1.4.2Open scan the QR on it to download
1.5 Log-in:log in by Device ID,on the APP choose right hand entrance.
ID: 10 digits on the battery Default Password:123456
1.6 Charging:charge according to the direction of the arrow on the watch.
Note:You can charge it by USB connector(computer, and smart phone charger both OK).
2. Descriptions of the watch
3. Main Functions:
● GPS+LBS+AGPS location
● Emergency Call
● Geo-fence
● Taker off Alarm
● Low Battery Alarm
● History Routes
● Voice Intercom
4. APP operation:
4.1 Download and Log in the APP (Reference 1.4 and1.5 )
4.2. Real-time Tracking
● Enter the Real-time Tracking menu, and you can see the location of the watch.
You also can check it on:
4.3 Historical Track
You can check the latest 90 days routes on APP and web.
4.4 Geo-Fence
Add an electric fence name & set a fence to watch as the center and with a radius of 100 to 5000 meters.When kids exit or enter the area, it will alarm by APP.
4.5.Settings
● Interval of sending GPS data- 3 modes available
i. Quick positioning----reported every 30 seconds.
ii.Default mode -----reported every 10 minutes(recommended)
iii. Power-saving Mode----reported every 1 hour.
● Main monitoring number
Enter Commend menu → Main monitoring number→ Input your phone number & click OK.(This number is used to receive Low battery alarm message)
● Monitoring Call
Input your phone number and click OK,the watch will dialing to you when commend success.
● Emergency Number
Input 2 phone numbers as emergency call and click OK,press Dad/Mom key for 3s,the watch will dialing corresponding emergency number (SOS) when commend success. (Emergency number set with Mom and Dad in general,but also can be set with other guardians).
● Set up Phone book:Click in name and phone No.,then press "confirm".Press MOM butoon to get contacts,press again MOM button to change contacts,long press MOM button,to dail the choosen No..
● White list
You can add 5 phone numbers to contact with kids beside Mom and Dad.(The device can receive calls only from users on the white list, in addition to the main number and emergency numbers, to avoid unwanted calls).
Note: must set main monitor number first,or any other phone can call the watch
● Take-off Alarm
Built-in light sensor, open “take-off alarm” button it will sending alarm message by APP when kids take off the watch
●Language and Timesetting:Choose the language you need.Dependsonyourcountry’slocation,chooseyourtimezonetosetit.Then restart you watch.Foreasttimezone,plus“+”,andforwesterntimezone,plus”-”
Eg:easteightarea:write“+8”,west3areas,write“-3”
● Voice Intercom
Press the switch button for about 5s, the screen will be a “recording”,you can start to record( up to 15s),release the watch will send the voice to APP ”Recording”automatically.
You also can record via APP recording, then send it to watch, then press “DAD” button to playback the voice.
5.Why my watch is offline?
1.● When the device is offline and gps don’t work, pls set the APN and make it works. Because the different Countries, the APN is different, wanna to know the APN about you sim card, pls asked the local operator.
Pls use your mobile phone send the message “pw,123456,apn, network name#”to the Sim card in the device
For Example: pw,123456,apn,cmwap#
cmwap is representative of the APN of China Mobile Operator
If successful to set the APN, it will reply “ APN set successfully”
●When call the watch, it shows that: the number you dialed is busy, it means the sim card in the watch didn’t open the CID ( caller ID Display), so it can’t recognize the number, pls open the CID.
●After set the command on the APP, it shows that the command is under sending or fail to send, it may have this problem:
a, The GPRS Network is weak or no signal, so it can’t transmit the data
b, The SIM card didn’t open the GPRS, suggesting to open the 30 M monthly GPRS Traffic package
c, The device is under calling, When the device is under calling, the GPRS Transmission is closed automatically.
●APP is always offline:
a, The balance of the sim card is insufficient, so it can’t transmit the data and make phone call.
b, the watch is power off or turn off
c, The device is under the situation of weak or none Signal ( it may mainly make the data can’t transmit into the platform)
●The position of the device is far away from the physical location about several hundred meter: Device is under LBS location, The accurate location of LBS is due to the LBS density of the device’s physical location, the normal accuracy location about LBS is between 50-1000 meter. ( Log in the web server, Under the more information about the device to filter LBS, It means to close the LBS)
6.APP QR
Apple APP Android APP