GPS Vehicle Tracker
(GPS+GSM+SMS/GPRS)
User Manual
(H06)
Preface
Thank you for purchasing the tracker. This anual shows how to operate
the device smoothly and correctly. Make sure to read this manualcarefully before using this product.
1.product packaging accessories:
4P power line 1, alarm button1, MIC1, horn1, specification1, warranty card 1, Certificate of conformity 1.
(Accessories products refer to the actual product)
2. Product accessories
· GSM four frequency system global general;
·built-in switching power supply, exceed wide voltage input range: 9-24 VDC;
· built-in vibration sensor, realize intelligent vehicle theft;
· support the original car security; · can external relays, to realize the remote control vehicle fuel and electricity;
· can be set up a hotline number for SOS call the police and security alarm;
· can be set up 10 vice number for receiving device returns information;
· can external SOS alarm button for emergency calls for help;
· can external microphone, to realize the remote voice surveillance function;
· built-in backup battery, realize the illegal cut the line alarm;
· can be two-way the intercom
1、Red LED(Power / state)
LEDstate / MeaningFlashing (0.1 seconds light, 0.1 seconds dark) / Low power alarm
Always light / Charging
Slow Flashing(2 seconds light, 2seconds dark) / Charge full
Dark / Low power/Shut
Slow Flashing(0.1 seconds light, 2seconds dark) / Working normally
2、Yellow LED-GSM(Power / state)
LEDstate / MeaningSlow Flashing(15 seconds light) / GSM initialization
Flashing(0.1 seconds light, 2seconds dark) / GSM working normally
Always light / GSM calling/GPRS start
Always dark / GSM no signal
3、Blue LED-GPS(Power / state)
LEDstate / MeaningFlashing (0.1 seconds light, 0.1 seconds dark) / GSM working normally
Always dark / GSM no signal
3.Appearance schemes
3.1、product size: length is 9cm;width is 4.5cm;heigh:1cm
3.2、product weight:60g
4.PreparationInstallation
4.1..Checktheproduct
Openthepackage, andcheckproductmodelandaccessories.Ifthereissomethingwrongormissing, pleasecontactthedistributor.
4.2.SelectSIMcard
TheselectionofSIMcardmustfollowthedistributor'ssuggestion.
4.3.InstallSIMcard
Firstly,openthecoverofthetrackerandthecoverontheslotforSIMcard;secondly, insertthecard intotheslot;thirdly,fastentheslot;finally,recovertheproductandlock theshelltightlywiththreescrews.
Tips:
Don't insert the SIM card up-side-down.·
MakesuretheSIMcardwith GPRS service.
IftheSIMcardhasbeeninserted,butitrequiresyoutoinputSIMPIN,pleaseclosetheSIMPINfunctionunder theinstructionofyour mobile phoneuser’s manual.
MakesuretheSIMcardaccounthasenough money
4.2.Install
installthetracker is hiddeninstallation, you'dbettertoinstallitwiththehelpofprofessionalcompaniesor workersauthorizedbythedistributor. Pleaseinstallitaccordingtothefollowinginstruction.
4.2.1. Toavoidthethief’sdestruction,thetrackershouldbeinstalledinahiddenplace.
4.2.2 Don'tputthetrackertogetherwiththeemissionsources,suchastheparkingradarsystem,alarms andothervehicle-carriedcommunicationterminals.
4.2.3Youcanfixthetrackerwiththecabletie,or glueit withwidestrongspongedouble-sidedtapes.
4.2.4 BecausethetrackerhasGSMandGPSantennainside,pleasemakesurethereceptionsideofGPSisupward(facingthesky),andthereisnometalshelterabovethetracker.
4.2.5 Suggestions areas follow:a,Hiddenareaunderthedecorationboardbelowthefrontwindshieldorbackwindshield;b, Hiddenareaaroundthefrontpanel(witha surfacemadeofnon-metalmaterials);
Attention:Ifthereisametalinsulation oraheatinglayer gluedinthewindshield,itwillreducetheefficiencyofGPSsignal reception,andtheGPScan’tworkwell,youneedtofindotherplacestoinstallagain.
4.3 Terminal outlet definition
Line sequence / definition / color / Wiring instructions1. 2 / Horn / Orange.orange / Docking horn
3. 4 / MIC-,MIC+ / black、red / Connect monitoring the microphone
3. 4 / SOS / Orange、Orange / SOS help alarm
5. 6 / MIC-,MIC+ / white / microphone
7 / GND / black / ground connection
8 / Off power/oil / black / Cut oil or electric
9 / Original / Orange. / Original car security
10 / V- / black(thick) / Car 12 V / 24 V battery negative
11 / V+ / red(thick) / Car 12 V / 24 V battery positive
Relay that connection
The oil pump breaker relays wiring method: Coil wiring for thin white line ends respectively (85) and fine yellow line (86), white line car power negative, fine yellow line by line relay terminal.
Was accused of vehicles on the fuel a combination of oil pump, the oil pump connecting positive cut, oil pump is extreme combination of the relay closed end (thick green line 87 a), and the other a pick relay public (the thick green line 30)
4.4 Terminal wiring diagram
5.Equipment connect the matters needing attention
Power supply, the original car guard against theft, broken oil and electricity control line (4 pin)
5.1This equipment is standard for power supply 9 V ~ 24 VDC, please choose the original provide power supply cord, red line power positive, the black line for power negative; When installation, please choose to separate negative power grounding wires or by iron, don't and other ground were answered
5.2 The original car security line (green line)
5.3 Broken oil electricity control line (yellow line) to pick up off the gas and electric relay 86 feet (i.e. relay socket in the fine yellow line)
5.4MIC line(2pin)
External microphones, realize voice surveillance function
5.5SOS line(2pin)
External SOS switch button, used for emergency calls for help
6.1 languagesettingcommand: LE(Englishmodel)
6.2obtaintheversionnumbercommand:HGT
6.3 Restorethefactorycommand::RSTplswait3 minute.
6.4 APNsettingscommand:APN:AA,XX,YY(AAistheoperator,XXisusernameandYYis password)
Example:APN:cmnet,,,
6.5IPsettings command:IP:IP mode#IPaddress #port#
Example:IP:1#
6.6Productregistrationcommand:
ZC+password+#+phone number(masternumber)+#+carstationID
Example:ZC000000# 15888185569# 13677198895
Note:Onlyafter youregisteredsuccessfully
6.7Pairnumberset command:SPN+ phonenumber#
Example:SPN13685456894#13688724474#1368529088#1358520647#
6.8 deletethecorrespondingviceNo.
Example:DSPN13685456894#
6.9deleteall pairnumber:
Example:DSPN
Reply:Deleteallpairnumbersuccess
6.10.querypairnumber
Example:FSPN
6.11 modifyregistrationpassword
MPoldpassword+newpassword,
Example:MP000000987654
6.12.fenceset
multi-modefencesettingcommand:the fencecode+radius+fencemodeExample:RCA999# 1
Note:999 is fence radius;1 is fence number
fencemodeissetseparately
Example: RCMA1
6.13clearfenceinstructions:DRC.Clearall fences
6.14 fixtimeandfixposition
Vehicle motion:XTn(5<n<65530)
Vehicle static: NXTn(5<n<65530, Default 5 minutes)
6.15Check, location,latitudeandlongitude
Thestatuscheck::DW
Replay:northern latitude22.6409533 east longitude: 114.0319983 Time:2011-08-06 10:33:11.
6.16 oilcontrol
disconnectthepowersource(oil)command:DO
Openpowersource(oil)command: TO
6.17Listeningsettings
theselectedlisteningsettingscommand: JT0
monitorsettings:JT1
6.18 anti-theftalarm
telephonealarmcommand:BJMA
SMSalarm:BJMB
6.19 GPSrestart: GPSCQ
6.20Equipment restart:SBCQ
6.21 Over-speedalarmsetcommand:ODn((0=<N<=1000)0= close)
6.22 Many parameters Settings: SZ: IP. Port, the APN, username, password, ACC open interval time upload, ACC closed interval time preaching.
Example :SZ:
Example:SZ:58.61.155.175,8169,cmnet,,,15,15
6.23 Inquire the equipment information
equipment:CX, return ID ,IP APN ,car move when the heartbeat interval time and time interval between car stop
6.25 Security Settings
Open security: KFD, close security: GFD
Note: open security after 3 minutes, triggered alarm will only take effect
GPS vehicle positioning terminal warranty card
Special statement:
1.the product have technology to change without prior notice
2.Product appearance and color is subject to change, in kind prevail.
3.Warranty card is only applicable to the IMEI number listed machines.
4.Please keep the card, show this card and the original purchase documents when guarantee.
5The specific scope under warranty please see table explanation.
This card for the warranty certificate, please fill in this card and save.。
Name / PhoneAddress
Model / IMEI NO.
Buying date / Invoice number
Sales unit name
Sales unit address
Sales unit phone
1.Since the purchase date, non-artificial damage fault is guaranteed for one year.
2.Belong to one of the following circumstances, not warranty, but can pay for maintenance.
1More than the guarantee period.
2 Without our authorization, disassemble or repair damaged.
3Water damage or destroyed printed circuit board.
4Improper installation, use, maintenance, safeguarding, caused damage.
5The process of using that caused housing, lens, built-in antennas damaged.
6 IMEI number Inside the product was damaged or not clear.
7The warranty card and the product model are inconsistentor the card is alter.
8Due to the force majeure damage.