RIVOLTA VINTAGE 43

SPECIFICATIONS

LOA with Bowsprit43’-11” (13.38 m)

LOA of the Hull43’-0” (13.10 m)

LWL34’-9”

Beam12’-6”

Draft3’-5”/6’-0”

Displacement 15,900 lbs.

Sail Area927 sq. ft.

SA/D Ratio24.4

D/LWL Ratio189

Power75Hp Yanmar 4JH4-TE

GENERAL CONSTRUCTION DETAILS FOR BASE BOAT

Hull: Infused E-glass and Corecell foam sandwich construction with vinylester resin.

Frames and Stringers: Fiberglass/vinylester hat-box section over low-density

foam. Spaced as required by ABS guidelines.

Keel Area: Solid fiberglass/vinylester.

Lifting Keel Trunk: Composite fabrication.

Lifting Keel Fin and Ballast: Ballast keel bulb cast of lead. Internal lifting keel

fin actuated by hydraulic cylinders.

Shroud Chainplates: Stainless steel.

Cockpit: E-glass and Corecell foam sandwich construction.

Deck: Solid wood deck beams of laminated Alaskan cedar and okoume marine-grade plywood.

Deck Finish: 3/8” manufactured teak deck bonded to subdeck with epoxy OR fiberglass sheathing and non-skid finish

Cabin Truck: 1” solid teak.

Cabin Trunk Front: Laminated of 6 layers 3mm okoume plywood, with 1/8” teak on inside and outside of lamination.

Cornerposts: Solid teak.

Windows: Four fixed windows per side. A 5” diameter opening deadlight in the center of the cabin front.

Companionway: Solid teak.

SAILING

Sails: Doyle or customer preference. Price to be determined.

Winches: All winches are Harken winches, of aluminum or chrome finish, at owner’s preference.

Primary Winches: Two B44.2 electric winches

Utility Winch: B44.2 electric winch, for jib and spinnaker halyards, main halyard and furling line. Mounted on centerline of aft end of cabin trunk.

Mainsheet Winch: B44.2 electric, mounted off-center to starboard aft of helm seat.

Hardware: Harken black anodized, as specified on deck plan, unless otherwise specified.

Jib: Electric under-deck furling jib system.

Mast: Carbon fiber by Offshore Spars.

Vang: Internally strengthened lug for boomvang.

Twin Rudders/Cable Steering

ENGINE

Main Engine: Yanmar 4JH3-TCE x SD50T Saildrive transmission

TANKAGE

Fuel: 60 gallons

Water: 140 gallons

Black Water: 20 gallons

ELECTRICAL

30 A shore power at 120 VAC

Xantrex 2000 watt inverter/100 A charger

Two 8-D AGM house batteries

One Group 27 engine start battery

OPTIONS

Teak deck

Retractable Bow Thruster

Mase IS 4.0 Diesel generator

Air Conditioning

Furling Main Boom

Carbon Main Boom

Feathering 16” Maxprop or Folding Propeller

Spreader Lights

Fixed Keel

INTERIOR

Interior arrangement and interior hardware can be customized to suit each client.

DECK CONFIGURATION

Deck configuration can, in part, be customized to suit each client.

SAILING HARDWARE

Sailing hardware can, in part, be customized to suit each client.

Yacht design by Stephens Waring & White