Eulux Flooring – No.1 Choice for Flooring
Excellent Value – Life Long Products plus 15 or 50-year Structural Guarantee
Eulux Floors are made of 17-19mm thick genuine hardwood right through (NOT 0.4 to 4mm thin hardwood veneer on top of soft pine). Unlike carpets and vinyl, which may have to be replaced in 5 to 10 years time, thick solid hardwood should last forever and increases in value as time goes by.
Houses with Wooden Floors Sold Fast
Homes with wood floors hold their value better, sell faster and fetch higher prices.
Pre-finished Floors: Cheaper than You Think
It is cheaper than getting unfinished timber laid and painted normally. The costs of Eulux solid timber floors are similar to buying and laying quality vinyl.
Pre-finished Floors: Unmatched Quality
Unlike most unfinished timbers, Eulux timbers were treated by German-made computerised pressurised steam chambers for up to 30 days to ensure the highest stability. Factory applied multi-layer of UV-cured hardwearing coatings are far superior to hand-painted ones and generally last 2 to 5 times longer than normal polyurethane.
Healthy, Clean Homes and Fast Installation
Hardwood floors does not harbour dust mites, moulds and toxic chemical residues as carpets do and are great for children and these suffer from asthma and allergies. In addition, toxic fume-free Eulux floors could be installed in one day rather than wait 4-6 days to get paint dry and several weeks for smell to disappear.
Frequently Asked Questions
Why Eulux Flooring is offering such low prices?
Eulux Flooring is a direct importer, wholesaler and retailer. So, basically you are getting wholesale prices rather than paying 20 to 50% more for normal retail prices.
Why solid timber floors offer far better value than thin hardwood veneer (engineered) flooring?
Firstly, Eulux Floors are several times thicker than the top layer of hardwood veneer flooring. The prices of Eulux Floors are comparable to most of veneer flooring on the market. Secondly, hardwood veneers and soft pine are likely to separate if excessive moisture presents. In contrast, solid hardwood floors will normally recover after major water damage.
Is bamboo suitable for flooring?
Bamboo is stronger than most hardwood. Bamboo flooring has been widely used overseas for more than ten years and has excellent stability and moisture resistance property.
How to clean Eulux Flooring?
Eulux Flooring does NOT need any special cleaner. You may keep Eulux Flooring clean with a vacuum cleaner, damp cloth and detergent. Never wax the floors. And never polish and clean the floors with harsh cleaners.
How to protect Eulux Flooring?
Place mats in areas subject to regular dirt wear. For example, entrances to outdoor areas. Fit furniture legs with felt tips. Wipe up any liquid or food spills immediately using dry cloth or paper towels. If the floor gets flooded accidentally, they will cup or buckle. DO NOT sand or plan it at this stage. Once the floor becomes dry totally (it may take months), it is likely the floor will recover itself (This is another reason why solid thick hardwood flooring is superior to veneer flooring).
Is it easy to install Eulux Floors?
Yes. As Eulux Floors are pre-sanded and painted in factory, on-site sanding and polyurethaning are eliminated. Neither special sanding equipment, nor breathing apparatus is needed. Eulux Floors have small bevels on all edges so that you feet would not be cut even if the subfloor is not perfect. To un-finished timbers, which often have sharp edges, you have to sand it to flat using special machines. Serious DIYers should be able to install Eulux Floors if correct procedures are followed.
Is Eulux Floors suitable for wet areas?
Kitchen and laundry are fine, as long as you can mop or wipe off any water spills promptly. For use in bathrooms, you may need to seal the gaps between floor boards with clear silicon or other suitable sealers to prevent water gets behind floor boards. Eulux Floors are not suitable for exterior uses and very wet areas.
Can under-floor heating system be installed below Eulux Floors?
Yes, as long as the floor boards do not touch the heating
elements directly and the temperature is below 26
degree. In fact, you will feel warm if the room temperature is high enough even without under-floor heating (a big saving) as solid timber is an excellent insulation material.
Can Eulux Flooring be installed over concrete, particle boards or old wooden floors?
Yes, Eulux Flooring can be installed over a wide range of materials, provided they have sufficient rigidity to allow the pre-finished floor to be either nailed or glued onto them permanently. Carpet, vinyl, cork tiles or foams must be removed or covered with other hard materials before installation. Eulux Flooring does not need a foam underlay,
I want to install the floor myself. What essential tools do I need?
(1) Mitre saw. (2) Jig saw. (3) Chisel. (4) Hammer.
Optional: Table saw or hand saw, planer, caulking gun and nail gun/angle bradder (with air compressor if not using gas powered) if nail the floor down.
What size of nail for nailing the floors down?
38mm (one and a half inch) long finishing/jolt-head nails. Fixed in 45 degree through tongues (secret nailing).
What type of glue can be used for gluing the floors down?
There are some glues that are specially made for gluing timber floors onto concrete. Alternatively, some heavy duty construction adhesive may also be used.
What is your refund policy?
Eulux Flooring carries a 30-day money back guarantee. After 30 days, you may still return un-used floors, provided they do not exceed 10% of the quantity purchased and in resalable condition.
Warranty Information
Eulux Flooring comes with a 50-year structural guarantee for any non-finger joint products and a 15-year structural guarantee for finger joint products including bamboo flooring. Terms and conditions apply.