MAJOR PROJECT REPORT
ON
“ELECTRICITY GENERATING DANCE FLOOR”
[ BY USING RACK & PINION MECHANISM]
IN PARTIAL FULFILMENT OF THE REQUIREMENT
FOR THE AWARD OF THE DEGREE
OF
BACHELOR OF ENGINEERING
IN
MECHANICAL ENGINEERING
SESSION 2007-2011
UNDER SUPERVISSION- SUBMITTED BY-
Er. DIWAKAR TIWARI Mr. AVIJEET PRATAP
8th, Sem. [07ME12]
DEPARTMENT OF MECHANICAL ENGINEERING
INSTITUTE OF ENGINEERING & TECHNOLOGY, KHANDAR CAMPUS
Dr. B. R. AMBEDKAR UNIVERSITY AGRA [UP].
MAJOR PROJECT REPORT
ON
“ELECTRICITY GENERATING DANCE FLOOR”
[ BY USING RACK & PINION MECHANISM]
IN PARTIAL FULFILMENT OF THE REQUIREMENT
FOR THE AWARD OF THE DEGREE
OF
BACHELOR OF ENGINEERING
IN
MECHANICAL ENGINEERING
SESSION 2007-2011
UNDER SUPERVISSION- SUBMITTED BY-
Er. DIWAKAR TIWARI Mr. AVIJEET PRATAP
8th, Sem. [07ME12]
DEPARTMENT OF MECHANICAL ENGINEERING ,
INSTITUTE OF ENGINEERING & TECHNOLOGY, KHANDARICAMPUS
Dr. B. R. AMBEDKAR UNIVERSITY AGRA [UP].
ACKNOWLEDGEMENT
I feel an immeasurable pleasure in expressing my profound and deep sense of gratitude to my supervisor Er. Diwakar Tiwari Department of MechanicalEngineering Institute of Engineering & Technology Khandari campus Agra for his ennumerable guidance, sympathetic attitude, keen interest and constant inspiration that enable me to fall and encounter all the difficulties during this project work.
I am grateful to Er. Ajeet Yadav ,HOD Of Mechanical , Institute ofEngineering & Technology Khandari campus Agra for deep support and necessary facilities during the completion of this project work. I am extremely thankful to the all faculties of Department of Mechanical Engineering IET khandari campus Agra for their suggestions and help.
I have sortage of words to express my feelings towards my respected parents and my friends who gave their continuous love and blessings. I would certainly like to extend my thank to all my classmates for their co-opration and every possible help.
Last but not the least I am thankful to almighty God with whose blessing. I have been able to complete this project work.
Date;- Avijeet Pratap
Institute of Engineering & Technology
Department of Mechanical Engineering
Dr.B.R. Ambedkar University, Agra
[Formerly Agra University]
Khandari campus Agra. [U.P.]
CERTIFICATE
This is ceritificate that the project work titled ELECTRICITY GENERATING DANCE FLOOR[By using rack & pinionmechanism] Which is being submitted by Mr. Avijeet Pratap in partial fulfillment of the requirement for the award of the degree ofB.E. in Mechanical Engineering is a record of their work carried under my supervision and guidance. The major project report has been checked corrected and is fit for submission.
Er. Diwakar Tiwari Er. Vipin Kumar Er. Ajeet Yadav
[SUPERVISOR] [Pro. COORDINATOR] [HOD]
CONTENTS
[1]- INTRODUCTION
[2]- OBJECTIVE, DEVLOPMENT AND TECHNIQUES
[3]- REQUIREMENT OF PROJECT
[A]- FRAME
[B]- RACK AND PINION
[C]- LEAD SCRW
[D]- SPRINGS
[F]- STEPPER MOTER
[E]- BATTRY ,LED & WIRE
[4]- SCOPE OF PROJECT
[5]- REFRENCES