Edited & Produced by the Directorate Network Management

data submission FORM for atc-sectors for airac UPDATES /
Addressees:EUROCONTROL - DNM
To AIRAC Support:
Copy AD Supervisor:
Originator
Date of Submission
Effective From
ATC-Sector Name
ATC-Sector Identification
If collapsed, please state
the ATC-Sectors included
If it is an elementary ATC-Sector, the sector boundary geographical coordinates are
Longitude / Latitude / PWP/NA / Longitude / Latitude / PWP/NA
Flight Level/Altitude Band
Lower / Upper
CAPACITY (On Airspace)
Default Capacity Value
Permanent Capacity Value
Start Day / Start Time / End Day / End Time / Capacity Hourly
Temporary Capacity Value
Start Date / Time / End Date / Time / Capacity Hourly
Reason for the Change:

Amendment date: 15 Jan 2013

Edited & produced by the Directorate Network Management

data submission FORM for atc-sectors for airac UPDATES /

Description

Originator:Name of the ENV Coordinator.

Date of Submission:Self explanatory.

Effective From:Should be an AIRAC date.

ATC-Sector Name:The operational identification of the Sector shall be filled in.

ATC-Sector Identification:To be coordinated with NM.

Elementary:Self explanatory.

Collapsed:Self explanatory.

If collapsed, please state the ATC-Sectors

included:The names of all ATC-Sectors which form the collapsed Sector shall be filled in. No coordinates can be used to describe a collapsed Sector.

If it is an elementary ATC-Sector, the sector

boundary geographical coordinates are:The geographical boundary points, of the sector as projected on the ground shall be given. If possible start with the coordinates of the point which is nearest to the NE and work your way through in a clockwise manner.

If a geographical coordinate is also the coordinate of a Published Way Point (PWP) or Navaid (NA), state also the name of this PWP or NA. Please state as well the eventual substraction of TMAs, CTAs, CTRs... in an elementary ATC-Sector (indicate the coordinates and the levels).

Flight Level/Altitude Band Lower/Upper limit:

The vertical boundaries of a Sector shall be filled in. These levels do not refer to the minimum and maximum usable flight levels within the Sector.

Capacity:Capacity values should be provided if known. A Traffic Volume capacity (Airspace as Reference location) overrules the capacity defined on the Airspace itself.

Start Day/Time, End Day/Time Value:The day of the week, beginning/ending hours plus the corresponding capacity value shall be filled in. The value can change per 20 minutes period.

Reason for the change:Self explanatory.

Amendment date: 15 Jan 2013

Edited & produced by the Directorate Network Management