D&C DJA/MVK:hf

SECTION 108600

SAFETY-SECURITY MIRRORS

EDIT TITLE TO REFLECT ACTUAL TYPE OF MIRRORS REQUIRED.

PART 1 GENERAL

1.01 SUBMITTALS

A. Product Data: Catalog sheets, specifications, and installation instructions for mirrors specified.

B. Contract Closeout Submittals:

1. Cleaning Data: Deliver two copies of the following, covering the installed products, to the Director’s Representative.

2. Maintenance Data.

PART 2 PRODUCTS

2.01 MANUFACTURED UNITS

MIRRORS BELOW ARE 18 INCH SIZE, OTHER SIZES AVAILABLE, CONSULT MANUFACTURER’S LITERATURE, AND CHANGE NUMBERS AS REQUIRED.

A. Full Dome Mirrors: Model DO-18 by Campus Crafts, Inc., 160 Murray St., P.O. Box 60650, Rochester, NY 14606, Model 18-BDF by Bell Glass & Mirror Co., 894 Coney Island Ave., Brooklyn, NY 11218, or Model GL-18 by Global Marketing Corp., 18 Taylor Ave., P.O. Box 850, Bethel, CT 06801.

B. Half Dome Mirrors: Model HDO-18 by Campus Crafts, Inc., 160 Murray St., P.O. Box 60650, Rochester, NY 14606, Model 18-BDH by Bell Glass & Mirror Co., 894 Coney Island Ave., Brooklyn, NY 11218, or Model PP-09 by Global Marketing Corp., 18 Taylor Ave., P.O. Box 850, Bethel, CT 06801.

C. Quarter Dome Mirrors: Model QDO-18 by Campus Crafts, Inc., 160 Murray St., P.O. Box 60650, Rochester, NY 14606, Model 18-BDQ by Bell Glass & Mirror Co., 894 Coney Island Ave., Brooklyn, NY 11218, or Model PP-04 by Global Marketing Corp., 18 Taylor Ave., P.O. Box 850, Bethel, CT 06801.

MIRRORS BELOW ARE 18 INCH SIZE, CONVEX MIRRORS, MIRRORS FOR EXTERIOR USE, AND OTHER SIZES ALSO AVAILABLE, CONSULT MANUFACTURER’S LITERATURE, AND CHANGE DESCRIPTION AND NUMBERS AS REQUIRED.

D. Round Acrylic Convex Mirrors: Model PSR-18 by Campus Crafts, Inc., 160 Murray St., P.O. Box 60650, Rochester, NY 14606, Model 18-DMPL by Bell Glass & Mirror Co., 894 Coney Island Ave., Brooklyn, NY 11218, or Model CX-18 by Global Marketing Corp., 18 Taylor Ave., P.O. Box 850, Bethel, CT 06801.

E. Accessories: Mounting hardware and fasteners for attachment to existing substrate.

PART 3 EXECUTION

3.01 INSTALLATION

A. Install the Work of this Section in accordance with the manufacturer’s printed instructions, except as otherwise shown on the Drawings.

END OF SECTION

Updated 07/07/2009

Printed 4/15/2015 108600 - 2 Project No.