Indian Institute of Technology Indore

Dual Ion Beam Sputtering Deposition (DIBSD) Facility

Registration Form

(Mandatory for all users and should be submitted to In-charge DIBSD facility)

DIBSD Code*:
Date of Experiment*:

Date of submission:

(*Please leave this blank)

User Code*

Name (Supervisor/Faculty/Scientist)
Organization/Institute/University
Address
E-mail
Phone Number

Growth Condition

Deposition temperature (oC):______Pressure (mbar): ______

Gas Composition:______Material to deposit: ______

Substrate type:______Substrate thickness (mm):______

Substrate dimension and shape:______

Any other information:______

Terms and Conditions:

  1. All publications/reports/presentations showing results of the sample grown by DIBSD facility at IIT Indore shall have the following acknowledgement: “We are grateful to the Dual Ion Beam Sputtering Deposition (DIBSD) Facility at IIT Indore”.
  2. Use of DIBSD Facility at IIT Indore automatically implies that above acknowledgement will be given by the user whenever either oral or written presentations are made of the results obtained from the DIBSD facility. Further, the user must ensure to send the copies of reprints of publications/reports/publications which contain results obtained from above facility to the concerned lab in-charge.
  3. Members of DIBSD Facility at IIT Indore, including faculty members, scientists, technicians, researchers and students, will not be responsible, liable or accountable, in any way, for the damage to the sample, in any form. Lab in-charge of DIBSD facility at IIT Indore reserves the right to deny the use of DIBSD facility to any person, at any time, without giving any reasons for the same.
  4. No consumables (materials, chemicals, substrates, etc.) will be provided by the facility in-charge.
  5. None except the facility in-charge and technicians, Ph.D. students and researchers approved by facility in-charge will be allowed during the use of the DIBSD facility.
  6. I agree to all terms and conditions mentioned in the Registration Form for using DIBSD facility at IIT Indore.
  7. Charges, if any, must be settled within 30 days of using the facility.

Name of Supervisor/Faculty/Scientist: ______

Signature: ______

Address:______

Email: ______

Phone: ______Fax: ______

Date:______

Forwarded by Head/In-charge: ______

Department/Centre/Discipline: ______

Signature with seal:

______

Address: ______

Email: ______

Phone: ______Fax: ______

Date: ______

Information for Users

Charges** for external users to use DIBSD Facility at IIT Indore:

All costs are per sample and per 200 nm of material growth and exclusive of taxes (at present 12.36 %)

Academic Institutions/Universities/National Laboratories (INR) / Industry (INR)
500 / 2,000

Bill Settlement:

Bills are sent after completion and submission of all material to user.

1)Bills should be settled within 30 days of date of bill.

2)Payments must be made by demand draft payable in Indore in name of REGISTRAR, IIT INDORE.

and to be sent to

Dr. Shaibal Mukherjee

Assistant Professor

Department of Electrical Engineering

Faculty In-charge: Dual Ion Beam Sputtering Deposition (DIBSD) Facility

Indian Institute of Technology Indore

Rm. No.- PG-18B (Office), PG-20 (Lab),

Pithampur Auto Cluster Limited (PACL) Building,

Survey No. 113/2-B,Village Harnia Khedi,

Tehsil MHOW, District-Indore (Opp. Veterinary College),

Pin code 453 441,

Email: ,

Tel: +91-732-4240715 (Office), +91-732-4240720 (Lab)

Fax: +91-731-2361482, +1-484-2317876

Website:

3)Official receipts will be sent on receipt of payment.

**The charges and/or the policy for facility charge may be revised from time to time by the concerned User Group.

1