Deep Side Channel Blinds (Crank Operated)

Online Blinds Order or Quote Form

Phone: 1800 350 221

Mobile: 0417 622 171

Fax: 07 3881 3929

Email:

Blinds are custom made to your exact measurements provided – no standard sizes or pre made blinds

How to Order:

  1. Measure the Width and Drop (Overall size as WIDTH PIN MEASUREMENT – Skin DROP)

Blinds are suitable for both Recess Fit (inside fit) or Face Fit (outside fit) when measuring we require

both top & bottom width measurements

  1. Only available in mesh fabrics – Aspect Atmosphere, Outlook Mode Colours and Privacy, Visiontex Ultra and Plus

(refer to the product page to view fabric pdf files)

Channels and bottom rail are available in Black or White. We are able to powdercoated Colourbond colours at an extra cost.

  1. Complete the details in the form below and fax to 07 3881 3929 or email to . If unable to download and complete form, please email your information.
  1. We will confirm your order/quote by email to you including delivery and payment options.

When pricing always go up to next measurement if in between eg: 2200mm wide price out at 2350mm

Order/Quote Form:

Date:
Name:
Delivery Address:
Postcode:
Phone: / Fax:
Email:
Blind
Width / Drop / Mesh Brand and Colour / Channel Colour
Black or White Powdercoated Colour / Recess or Face Fit / Control Side looking from inside

Online Blinds Awning and Blind custom made products are delivered fully assembled with installation instructions and all the necessary screws, brackets etc ready to you to install for a timber fit. For brickwork fit wall plugs are not supplied.

On placing your order full payment is required before we can proceed with the order. Confirmation of your order will then be sent to you.

Manufacturing of your order should be approximately 2 to 4 weeks.

We accept Master & Visa Cards by phone or emailed and Direct Deposit as payment.

Freight charges – postcode or address is required

Brisbane metropolitan no charge

Sunshine Coast, Gold Coast, Country Qld and all other States POA.

All deliveries are Door to Door however in some cases delivery can be to the nearest freight depot for customer to pick up.

All items are sent with Insurance and Tracking

Blinds are custom made to width measurement either Recess Fit (inside mount) between posts or Face Fit (outside mount) on face of post.

Drop measurement is from either under beam or face fit of beam to floor or wherever the required blind drop.

All our products are custom made to your measurements, MANUFACTURED IN AUSTRALIA and we use Australian made components where possible.

Handy Hints

  • You will need a good Tape Measure (metal ones are the best) all measurements are in mm (1800mm width).
  • When measuring, always look out for things like down pipes, windows that open outwards or if the awning (with arms) will be in the way of a walk way (eg Auto Lock Arm & Cord & Reel Awnings)
  • Most of our awnings & blinds can be fitted face fix or recess fit. This gives you complete control over the positioning of your awning and blind.