Daily Maintenance Log
/ VITROS 5,1 FS Chemistry SystemMonth/Year: / System J Number:
Procedure / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31
Perform ERF Maintenance (every 24 hours):
Clean ERF Reservoir Holder & Base
Replace ERF Reservoir
Replace ERF Tip
Clean ERF Tip Sleeve
Perform IWF Maintenance (every 72 hours):
Clean IWF Reservoir Holder & Base
Replace IWF Reservoir
Replace Wash Fluid Tip
Clean Wash Fluid Tip Sleeve
Perform Metering Maintenance:
Clean Primary & Secondary Metering Proboscises
Empty Slide Waste
Empty Disposable Waste
Empty VITROS VersaTip Cup (If equipped)
Inspect and clean Sample Trays & Microadaptors
Load Supplies and remove outdated and empty reagents
Perform Quality Control
Other:
Week 1: Reviewed by: ______Date: ______/ Week 4: Reviewed by: ______Date: ______
Week 2: Reviewed by: ______Date: ______/ Week 5: Reviewed by: ______Date: ______
Week 3: Reviewed by: ______Date: ______
Weekly, Monthly, and As-required Maintenance Log
/ VITROS 5,1 FS Chemistry SystemMonth/Year: / System J Number:
Weekly Procedures / 1 / 2 / 3 / 4 / 5 / As-required Procedures / Date / Initials
Clean Sample Supply / Replace Desiccant Packs*
Clean Sample Supply Cap Retainers (STAT, Primary, TriFlex) / Replace VITROS FS Humidity Control Pack*
Clean Tip Locator Assembly and Leak Pad / Clean Dispense Blade*
Clean Supply 3 Leak Pad / Replace Dispense Blade*
Clean Primary & Secondary Tip Sealers / Replace Proboscis/Piston Assembly*
Clean Monitor / Perform Photometer Water Blank*
Clean Keyboard / Replace VITROS VersaTip Loader Compressor Filter (6 months)
Process VITROS MicroSensor Check Fluids I and II / Replace System Filter (6 months)
Perform Pad Reflectance (6 months)
Perform Correction Factors (at least every 6months)
Monthly Procedures / Replace Master Computer Filter (at least every 2 months)
Clean Cuvette Arm / * When indicated by condition code
Clean Cuvette Supply
Clean Cuvette Incubator
Clean PM Discard Chute
Clean and replace PM Evaporation Caps / Replaceable Units (replace only when indicated by condition code)
Clean PM Incubator Slot and Insert Blade Channels / Rate Lamp
Clean CuveTip Cover and Ring area / Photometer Lamp
Inspect and clean MicroTip Supply / ERF Metering Pump
Inspect and clean Supply 3 Reagent Carousel / ERF Metering Tubing
Inspect and clean Supply 3 Housing and Cover / Wash Fluid Metering Pump
Inspect and clean Supply 3 MicroTip Pack Opener / Wash Fluid Metering Tubing
Clean Supply 3 Tub and Bar Code Reader Window / Primary Metering Proboscis/Piston Assembly
Clean VITROS VersaTip Supply Registration Rails / Secondary Metering Proboscis/Piston Assembly
Perform System Backup
Week 1: Reviewed by: ______Date: ______/ Week 4: Reviewed by: ______Date: ______
Week 2: Reviewed by: ______Date: ______/ Week 5: Reviewed by: ______Date: ______
Week 3: Reviewed by: ______Date: ______
Version 3.2This version supersedes all previous versions of this document including V-Docs REF: J23313_EN2007-06-14