RESUME
Name: Siva Balasubramaniam
Job title: Instrument Supervisor
Job Ref: Dubai (Offshore), Rotation: 28x28.
Date of birth: 16-03-1977
Nationality: Indian
Educational qualification: Diploma in Electronics & Communication Engineering
Email:
Mobile Phone: 00965-60072967, 66130715-Kuwait
Experience: 16 years
Present position: Senior Instrument Technician (Work site Supervisor)
Current location: Kuwait
Passport Details: H1149011, Valid up to: 01-12-2018
Training: Sea survival,HSE,H2S & Electronic work Permit
Availability: 30 Days
Best to contact: Email (or) Mobile phone
Career summary
With sixteen years experience in Gas treatment plant, Oil rig (offshore), Oil gathering center, Power plant,
Chemical preparation plant, Effluent water treatment plant for Employers such as Hyundai-Iran,
Deutsche Babcock-Kuwait,MIS-Sharjah and Kuwait oil company-Kuwait.
Supervises overall maintenance, proven erection & commissioning, servicing and calibration in
InstrumentationDepartment. Knowledge in DCS, PLC, ESD system hardware and Software configuration,
Trouble Shooting inSystemLogic andimplementing new Control loops, carry out technical evaluations of
Vendor offers, checking of vendor drawings, Familiar with APermit towork system and lock-out procedures,
Preventive maintenance andProcedures, ISO 9000 Series Quality Management Concepts and systems,
Maximo updating,Manpower planning and estimation, preparation of failure analysis reports (FAR) and
Recommendations to avoid recurrence, preparation of various progress reports, PM task reports and purchase
Requisition for spares, Conduct safety Tool box meeting, Involves in expansion & modification, Attended
Seasurvival& HSE Training, Toxic&Combustible gas rescue training, Computer skills in MS office.
EXPERIENCE DETAILS
May 2009-Present,Employer: Almeer Technical services co.w.l.l, Kuwait,
Site: Kuwait Oil Company, Position: Senior instrument technician (Work site supervisor),
System: DCS- Emerson (Delta V), PLC: Hima, Allen Bradley, Gefanuc
Responsibilities: Responsible for theEffluent Water Treatment Plant, Disposal well, oil gathering center,
Injection wells day to day execution of work by Instrument team works. Reviews work Notifications,
WorkOrder management, arranges for external calibration when required and maintains full
Equipment history inMMMS. Participates as required in the planning of major maintenance and plant
Shutdowns. Supervises overall maintenance, provides technical advice on work methods and repairs or
Replacementof DefectiveParts.Communicates job safety requirements to ensure that subordinates
Understand the workObjectives,Safety health, environmental concerns and need for Job Safety Analysis.
Conducts toolbox talks as required.Experience with the implementation of ISO 9000 Series Quality
Management concepts and systems. Familiarwith a permit to work system and lock-out procedures.
Inspection of calibration of field Instruments like Transmitters, switches (flow, level, Pressure, Temp)
Controlvalves, Analyzers,vibration Probes, Fire & Gas detectors. Trouble shooting in DCS, PLC, ESD
Systemlogicand implementing new Control loop, and replace the faulty I/O modules as required.
Feb 2006- April 2009, Employer: Orient green power company ltd, India.
Site: Power plant (8 MW), Position: Instrumentation- Engineer, System: DCS- Siemens PCS 7
Responsibilities: Supervises Erection, Testing, Commissioning and maintenance ofBoiler and Turbine filed
Instruments.Loop checking, preparing the punch list, Foundation Field Bus System (FF) such as Field Bus
Instruments Installation, Protection test of Boiler and Turbine during Startup, Routine Maintenance in
Boiler & Turbine;Assign the Logic andTesting from (SIEMENS PCS-7), Planning the shutdown activities,
Trouble Shooting in DCS, Inspection of Calibration of all field Instruments, tuning the controller in DCS,
Preparing work permits, Equipment History cards, Calibration Sheets, job allotment to technicians &fitters,
Materialsmaintaining and Attending meeting with management superiors.
June 2005 - Feb 2006, Employer: Tyco hofincons, India. Site: ITC PSPD Ltd,
Position: Master technician-A, System: Yokogawa Centum CS3000.
Responsibilities: Routine Maintenance in Gas Turbine (Make: GE, Controls: Mark V) and Auxiliaries,
Supervises of Calibration, servicing of Electronic Transmitters,Controlvalves, switches
(Pressure level, Temp, Flow), vibrationprobes, Analyzers, Handling of Dead weight Tester, Comparison
Tester, Temperature Bath, Decade Resistance Box, simulator, Hartcommunicator, Pressure Calibrator
(Druck), Megger, Tuning of multi loopcontroller, loop Checking and troubleShooting, monitoring and
Maintaining the variousparameters and reports, solving Technical issues, maintains instrumentlog Note.
July 2004 - April 2005, Employer: MIS CO.Ltd, Sharjah. Site: Al-itihad Oil rig, Offshore,
Position: Instrument technician, Training: HSE and Sea Survival at Abudhabi
Responsibilities: Material requisitions, cable schedule, instrument data sheets, Hook up diagrams,
Loop diagrams, P & ID’s, & as built drawings for instruments. Testing and Commissioning of Tank
Gauging System, Fire & Gas Detection Systems, Public Address System, General Alarm System,
Engine Alarm System, ESD System, CommunicationSystemand coordinating with drilling Team
during Drilling.
Sep 1998 - Aug 2001; Oct 2001 - Feb 2004, Employer: Deutsche Babcock, Kuwait.
Site: Doha West Power Station (2400 MW), Position: Instrument technician,
System: BBC Pro control 1100
Responsibilities: Routine Maintenance Activities like Attending Work order Problems, Calibration and
Servicing of field Instruments. Specialized in Burner Management system, Boiler Protection test,
Start up, Planned Shutdown and Emergency Shutdown Activities, preparing calibration reports and
Test certificates, control schemes, hook up drawings, relay logic diagrams and pipe line & instruments diagrams.
Aug2001-Oct 2001, Employer: Hyundai Engineering & constructions, Iran.
Site: Iran-South pars Phase II&III, Onshore facilities, Position: Instrument commissioning foreman
System: Yokogawa Centum CS3000
Responsibilities: Loop checking, clearing punch list, calibration of all processinstruments,
Commissioning and start up of fuel Gas skid system for Gas turbine. (GE Make; Frame-9E)
Nov 1994 - Sep 1998, Employer: SIV Industries ltd, India. Position: Instrument technician,
System: Tata Honeywell TDC3000
Responsibilities: Routine Maintenance in H2SO4 Refinery, Chlorine Preparation plants, Ammonia
Storage tanks and Compressor protection system, Calibration, servicing of Pneumatic Electronic
Field instruments
Skills
1. Skilled at performing and documenting completion of maintenance, calibration, installation, Trouble shooting,
Manpower maintaining, and repair of electronic and pneumatic instruments and systems
2.Leading a team consists of instrument Technicians, Instrument fitters, for installation &
Commissioning and maintenance of process control instrumentation field.
3. Trouble shooting in DCS, PLC, ESD logic, checking system configuration, testing I/O Loops.
(DCS; Emerson - Delta V, Yokogawa CS3000, Siemens-PCS7)(PLC; HIMA, A. Bradley, GEfanuc)
4. Startup of Effluent water treatment plant (Oil removal), oil gathering center, Injection & Disposal well
5. Checkout and commissioning on Fuel gas Skid for Gas Turbine. Make: GE, Controls: Mark V
6. Boiler and Steam Turbine start up Activities and Shutdown Activities. (2400 MW)
7. Erection & commissioning in Oil rig Instrumentation systems.
DECLERATION
Hereby I assure you that above mentioned information are true to best of my knowledge and belief.
Yours truly,
Siva Balasubramaniam
Page 1 of 4