A & E Specification – SmartDisc+ E4

  1. Description:The unit shall be a high performancetransmission realtime recording hybrid device. The unit shall meet or exceed the following design and performance specifications. Points with 1relate to using the Smart with analogue cameras only.
  2. Video

SmartDisc+ E4 A&E spec–April 2016

Page 1 of 4

A & E Specification – VLS2-04TR SmartTel

2.1.IP: up to 10 cameras with multiple use of different types and resolutions

2.2.Analogue: 4 x 1 Vpp/75 Ohm, with loop through outputs (auto-termination). If any of these channels are enabled via any SmartControl software, these inputs will take priority over the relevant IP channel, 1 to 4 inclusive.

2.3.Video standard:IP: Dependent on IP camera (refer to IP camera compatibility list)Analogue: CCIR/PAL and EIA/CCIR.

2.4.Video compression: IP: H.264 / MJPEG / JPEG (with selected IP cameras) / Analogue: HTcompressdifferential compression with adjustable compression factor per camera

2.5.Picture formats: IP: camera dependant on model: upto 5MP. Analogue: Transmission & Recording: upto 720x288 pixels

2.6.IntrusionTrace.h licences: upto 4

2.7.Transmission with analogue cameras:720 x 288, 512 x 256, 256 x 128, 128 x 80 pixels and 16 Bit colour depth. Recording (pre-alarm): 720 x 288 pixels

2.8.Video output:Camera switcher with manual, alarm and sequence control; 1 x CVBS (BNC), 1 Vpp/75 Ohm

2.9.Motion Detection: Analogue; Selectable per camera with adjustable detection zones for alarm transmission and event-triggered recording (HDD). IP: Depending on type of IP cameras and integration (see IP camera compatibility list)

2.10.Video signal monitoring:Video signal monitoring (sync. and picture content) for all cameras

  1. Audio

VLS2-04TR A&E Spec –July 2012

Page 1 of 3

A & E Specification – VLS2-04TR SmartTel

3.1.General: Bi-directional audio transmission & recording

3.2.Audio compression: SPEEX Codec, 16 Bit, 80-8000 Hz

3.3.Audio input: 1 x line in (0-2 Vpp, nominal 0.775 Vpp) or Mic in (electret or electrostatic microphone)

3.4.Audio output: 1 xline out (0-2 Vpp, nominal 0.775 Vpp) and 1 speaker out (1 Watt/8 Ohm)

  1. TransmissionRecording

SmartDisc+ E4 A&E spec–April 2016

Page 1 of 4

A & E Specification – SmartDisc+ E4

4.1.General: Video and audio transmission, recording and playback at the same time; onlineevaluation via local and remote receiver station, or offline via removable HDD

4.2.Multi-Unicast: Up to 6 IP- or 5 IP- and 1 dial-up connection simultaneously

4.3.Web server: Up to 4 IP connections via PC/Smartphone/PDA Web browser (additional to 5 standard connections)

4.4.Video transmission of live & recorded images: Up to real-time via IP (LAN/WLAN, Internet, DSL, GPRS, HSDPA, CDMA, UMTS, EDGE, LTE)

4.5.Recording speed: Upto 25 ips per channel (realtime recording). Pixel dependant on compression mode, image content & Bit rate

4.6.Recording media: Static applications: removable SATA 1TB, 2TB or 4TB HDD with adaptive track management / Mobile applications: removable SATA 1TB HDD with adaptive track management

4.7.Trigger to initiate transmission / recording: Dry contact, built-in motion detection1 serial command and time based calendar (Motion detection via IP camera is dependant on integration).

4.8.Privacy Zones: Analogue: Up to 5 privacy zones per camera; options for each camera: live or live and recorded images. IP: Privacy zones are dependant on the camera.

4.9.Recording modes: Image sequence, up to 50,000 events per camera with pre- and post alarm, continuous recording, all modes in conjunction with built-in timer based calendar

4.10.Recording interval: Event recording: interval 0-999s and duration 1-999s separately adjustable for pre- and post alarm; continuous recording: interval 0-999s timer controlled (event optimised recording possible) (value "0"= as fast as possible)

4.11.Callback: Automatic callback to pre-programmed receiver stations with SmartControl software

SmartDisc+ E4 A&E spec–April 2016

Page 1 of 4

A & E Specification – SmartDisc +E 4A

  1. Remote access and evaluation
  2. General features: Remote access to live & recorded images and remote setup/maintenance via receiver software
  3. Search criteria: Site list and camera selection with support camera, time, date, event (contact, motion1)and graphical analysis of event and permanent recordings
  4. Motion Smart Search1: In offline mode considering camera, detection zones, sensitivity and date/time
  5. Reference images: Transmitter list and camera selection supported by object specific reference images
  6. Access protection: Multiple password levels and sophisticated user management
  7. Log File: >16000 event log with LED notification
  8. Interfaces

SmartDisc+ E4 A&E spec–April 2016

Page 1 of 4

A & E Specification – SmartDisc +E 4A

6.1.1 x eSATA: Interface for external recording based on HDD

6.2.1 x LAN: 1G/Bit/s built-in network adapter, RJ45 connector, DHCP, auto detection within LAN

6.3.2 x USB: 2.0: for configuration of device / WiFi stick

6.4.PTZ Control: Via onboard RS-232/485 (422) interface (screw/clamp)

6.5.Transparent data channel/ control interface: Via onboard RS-232 interface (9 pin Sub-D)

6.6.Resistance-monitored (EoL) alarm inputs: 10 alarm inputs (camera related), 1 general alarm input, 1 arm/disarm and 1 tamper input (all on screw terminals)

6.7.Control outputs: 2 relays-system error and/or remote control purposes (changeover contact on screw/clamp strip), max. 30V DC/1 A, 60V DC/0.3 A, 125V AC/0.5 A

  1. General
  2. Operating system/system design: Embedded Linux/dedicated hardware (not PC based)
  3. Control and display element: On-Off button, push button for manual camera selection and status LEDs
  4. Setup and software update: Via local USB 2.0 and/or remote receiver station via IP, LAN and/or WAN DSL, GPRS, HSDPA, CDMA, UMTS, EDGE, LTE (if via 3G or 4G router)
  5. Operating voltage/Power consumption: 12-24VDC, max. 25W
  6. Operating temperature: +5°C ... +40°C (+41°F ... +104°F)
  7. Housing/Enclosure: Desktop and wall mounting: 221 x 88 x 270 (WxHxD mm); 19" mounting: 1/2 19"x 2 RU x 275 mm (WxHxD)
  8. Weight: Net: 2.8 Kg / Gross: 3.9 Kg
  9. Protection class: IP30 according to IEC 60529, DIN EN 60529
  10. Approvals: CE (EN 61000-6-3, EN 55022, Kl.B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-4-2, -3, -4, -5, -6, EN 50204, EN 50130-4); FIDUCIA (starting from SmartControl LITE 3.90), UVV Kassen, BS8418
  11. Vista Model Number
  12. 0768290SmartDisc+E410IP / 4analogue hybrid realtime device (no HDD)
  13. Accessories
  14. 0480300VLS2-DR1TB1TB HDD forSmartDisc+ E (Static applications)
  15. 0480310VLS2-DR2TB2TB HDD for SmartDisc+ E (Static applications)
  16. 0480370VLS2-DR4TB4TB HDD for SmartDisc+ E (Static applications)
  17. 0480320VLS2-DRMOB1TB 1TB HDD for SmartDisc+ E (Mobile applications)
  18. 0769020IntrusionTrace.h 11ch IntrusionTrace license for SmartDisc(+) E & ipVG
  19. 0769030IntrusionTrace.h 22ch IntrusionTrace license for SmartDisc(+) E & ipVG
  20. 0769040IntrusionTrace.h 44ch IntrusionTrace license for SmartDisc(+) E & ipVG
  21. 0776130Smart 4G/GPS/R4G (LTE) / GPS plug in router for SmartDisc(+) E
  22. 0776140Smart 4G/GPS/A4G (LTE) / GPS antennae, 2 x SMA connectors
  23. 0776150Smart +E CaddyUSB caddy for VLS2 HDD

SmartDisc+ E4 A&E spec–April 2016

Page 1 of 4