Form Sta/Sd/Op/03/F4

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1864:2010, Battery chargers — Performance
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18concerning documentKS 1864:2010, Battery chargers — PerformanceI ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1876-1:2010, Electrical power transmission and distribution — Overhead power lines for conditions prevailing in Kenya — Part 1: Code of practice
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1876-1:2010, Electrical power transmission and distribution — Overhead power lines for conditions prevailing in Kenya — Part 1: Code of practice I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1876-2:2010, Electrical power transmission and distribution — Overhead power lines for conditions prevailing in Kenya — Part 2: Safety
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1876-2:2010, Electrical power transmission and distribution — Overhead power lines for conditions prevailing in Kenya — Part 2: Safety I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1877:2010, Electrical power transmission and distribution — Guidelines for the application design, planning and construction of medium voltage overhead power lines up to and including 22 kV, using wooden pole structures and bare conductors
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1877:2010, Electrical power transmission and distribution — Guidelines for the application design, planning and construction of medium voltage overhead power lines up to and including 22 kV, using wooden pole structures and bare conductors I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1878-0:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 0: Definitions
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1878-0:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 0: Definitions I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1878-1:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 1: Planning and design of distribution systems
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1878-1:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 1: Planning and design of distribution systems I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1878-2-3:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 2-3: Preferred methods and materials for the installation of overhead power lines
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1878-2-3:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 2-3: Preferred methods and materials for the installation of overhead power lines I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1864:2010, KS 1878-3:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 3: Overhead distribution in very low, low and moderate consumption areas, including rural areas and informal settlements
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1878-3:2010, Electrical power transmission and distribution — Guidelines for the provision of electrical distribution networks in residential areas — Part 3: Overhead distribution in very low, low and moderate consumption areas, including rural areas and informal settlements I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 2236-1:2010, Electricity supply — Quality of supply — Part 1: Minimum standards
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 2236-1:2010, Electricity supply — Quality of supply — Part 1: Minimum standards I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 2236-2:2010, Electricity supply — Quality of supply — Part 2: Reporting guidelines
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 2236-2:2010, Electricity supply — Quality of supply — Part 2: Reporting guidelines I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 2236-3:2010, Electricity supply — Quality of supply — Part 3: Voltage characteristics, compatibility levels, limits and assessment methods
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 2236-3:2010, Electricity supply — Quality of supply — Part 3: Voltage characteristics, compatibility levels, limits and assessment methods I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 2236-4:2010, Electricity supply — Quality of supply — Part 4: Application guidelines for utilities
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 2236-4:2010, Electricity supply — Quality of supply — Part 4: Application guidelines for utilities I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1859-1:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 1: Definitions
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1859-1:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 1: Definitions I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1859-2:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 2: Voltage colour coding for diagrammatic displays in control rooms — Colour coding for wall-mounted operating diagrams and electronic displays relating to the generation, transmission and distribution of electricity
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1859-2:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 2: Voltage colour coding for diagrammatic displays in control rooms — Colour coding for wall-mounted operating diagrams and electronic displays relating to the generation, transmission and distribution of electricity I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1859-3:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 3: Model regulations — Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 V, for the transmission and distribution of electricity
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1859-3:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 3: Model regulations — Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 V, for the transmission and distribution of electricity I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………

Signature:

On behalf of:(name of organization)

Date:

NOTE: Absence of any reply or comments shall be deemed to be an acceptance of the final draft Kenya standard and shall constitute an approval vote.

FORM STA/SD/OP/03/F4

BALLOT FORM

Title: / KS 1859-5:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 5: Standard procedure and terminology for the issuing of operating instructions
Document Type: / Draft for balloting
Dates: / Circulation date / Closing date
2010-05-17 / 2010-06-08
Recipient / This form is to be filled, signed and returned to Kenya Bureau of Standards for the attention of <MR. REUBEN GISORE

With reference to the last meeting of the Switchgear and Distribution Equipment Technical Committee, held on2010-02-18 concerning documentKS 1859-5:2010, Electrical power transmission and distribution — High-voltage operating regulations — Part 5: Standard procedure and terminology for the issuing of operating instructions I ______(name of responding person)

accept [*]

do not accept

the document as approved by the committee.

If you do not accept, please indicate the part of the document not acceptable to you, with reasons, in the space provided below (if the space is not enough, please attach a separate sheet of paper):

………………………………………………………………………………………………………………………