BUILDING, ENGINEERING & NEIGHBORHOOD SERVICES
DEVELOPMENT CHECK LIST
1) Stamp in submittals and applications
2) Index number and type of developments on Assessor’s Map Book Page.
3) Make copies of APN storm drain and sewer base maps. Outline Project Area
and label
4) Log data received on summary log.
5) Start log sheet.
6) Check if in City limits.
7) If any of the following restricted or special areas:
Hillside Development Area Yes No
Flood Hazard Zone Yes No
Alquist-Priolo Fault Zone Yes No
8) Check street layout against the General Plan
9) Check with Design Section and the Bond Program Section for any proposed City projects in this area.
10) Check administrative Section for any proposed Assessment Districts in the area.
11) Compare with Master Storm Drainage Area Maps & Zones
LDA $ /Acre Master Storm Drain Req.
12) Compare with sanitary sewer master plan and existing sewer line base maps.
Pipe Size: Location
13) Check with existing storm drainage Maintenance District 1.
Pipe Size: Location
14) Take field trip and make on-site investigation.
15) Take picture(s) as required.
16) Check that the following shown correctly on tentative map:
Street
Existing road width
Proposed road width
Existing R/W width
Proposed R/W width
Needed width of dedications
17) Check limited access rights off base maps.
18) Obtain traffic engineering comments.
19) Check for bonds and agreements.
Need: RMA 2-Year
DIA Shared Access
Shared Parking Other
ENGINEER:
1) If Hillside Subdivision, review soils report in detail.
2) Review fees and special requirements.
3) Review Access.
4) Review Drainage
5) Review sewering.
L:\ENGINEER\Forms & Guidelines\development checklist.doc.doc