OSHA Outreach 30Hr General Industry Topic Outline

OSHA Outreach 30hr General Industry Topic Outline

Trainer:______

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED

At a minimum, a 10 minute break must be taken after 2 hours of teaching and a 30 minute lunch if teaching over 6 hours.

Required-
Topics are mandatory and time is the minimum amount required. / Electives- Combined Total of 10 hours
Choose at least 6 topics from the list below for at least 30 minutes per topic.
Intro to OSHA
Managing Safety & Health
Walking & Working Surfaces, including Fall Protection
Exit Routes, Emergency Action Plans, Fire Prevention Plans, & Fire Protection Plan
Electrical
Personal Protective Equipment (PPE)
Materials Handling
Hazardous Communication / 1 hour
2 hours
1 hour
2 hours
2 hours
1 hour
2 hours
1 hour / Hazardous Materials (Flammable & Combustible Liquids, Spray Finishing, Compressed Gas, Dipping & Coating Operations)
Permit-Required Confined Spaces
Lockout/Tagout
Machine Guarding
Welding, Cutting & Brazing
Introduction to Industrial Hygiene
Bloodborne Pathogens
Ergonomics
Fall Protection
Safety & Health Programs
Powered Industrial Vehicles
Optional-Combined Total of 8 hours
Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic must be 30 minutes or more.
Day / Date / Time / Topic
(include breaks & lunch) / Time (hr/min)
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
TOTAL Contact Hours

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED Maximum teaching hours per day – 7.5

OSHA Outreach 30hr General Industry Topic Outline

Trainer:______

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED

At a minimum, a 10 minute break must be taken after 2 hours of teaching and a 30 minute lunch if teaching over 6 hours.

Required-
Topics are mandatory and time is the minimum amount required. / Electives- Combined Total of 10 hours
Choose at least 6 topics from the list below for at least 30 minutes per topic.
Intro to OSHA
Managing Safety & Health
Walking & Working Surfaces, including Fall Protection
Exit Routes, Emergency Action Plans, Fire Prevention Plans, & Fire Protection Plan
Electrical
Personal Protective Equipment (PPE)
Materials Handling
Hazardous Communication / 1 hour
2 hours
1 hour
2 hours
2 hours
1 hour
2 hours
1 hour / Hazardous Materials (Flammable & Combustible Liquids, Spray Finishing, Compressed Gas, Dipping & Coating Operations)
Permit-Required Confined Spaces
Lockout/Tagout
Machine Guarding
Welding, Cutting & Brazing
Introduction to Industrial Hygiene
Bloodborne Pathogens
Ergonomics
Fall Protection
Safety & Health Programs
Powered Industrial Vehicles
Optional-Combined Total of 8 hours
Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic must be 30 minutes or more.
Day / Date / Time / Topic
(include breaks & lunch) / Time (hr/min)
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
TOTAL Contact Hours

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED Maximum teaching hours per day – 7.5

OSHA Outreach 30hr General Industry Topic Outline

Trainer:______

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED

At a minimum, a 10 minute break must be taken after 2 hours of teaching and a 30 minute lunch if teaching over 6 hours.

Required-
Topics are mandatory and time is the minimum amount required. / Electives- Combined Total of 10 hours
Choose at least 6 topics from the list below for at least 30 minutes per topic.
Intro to OSHA
Managing Safety & Health
Walking & Working Surfaces, including Fall Protection
Exit Routes, Emergency Action Plans, Fire Prevention Plans, & Fire Protection Plan
Electrical
Personal Protective Equipment (PPE)
Materials Handling
Hazardous Communication / 1 hour
2 hours
1 hour
2 hours
2 hours
1 hour
2 hours
1 hour / Hazardous Materials (Flammable & Combustible Liquids, Spray Finishing, Compressed Gas, Dipping & Coating Operations)
Permit-Required Confined Spaces
Lockout/Tagout
Machine Guarding
Welding, Cutting & Brazing
Introduction to Industrial Hygiene
Bloodborne Pathogens
Ergonomics
Fall Protection
Safety & Health Programs
Powered Industrial Vehicles
Optional-Combined Total of 8 hours
Teach other general industry hazards or policies and/or expand on the mandatory or elective topics. The minimum length of any topic must be 30 minutes or more.
Day / Date / Time / Topic
(include breaks & lunch) / Time (hr/min)
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
AM/PM to AM/PM
TOTAL Contact Hours

REMINDER: BREAKS and LUNCH MUST BE DOCUMENTED Maximum teaching hours per day – 7.5

1