Easy-To-See Quartz Wall Clocks

Easy-to-see quartz wall clocks

CC23 & CC33

Please retain these instructions for future reference. These instructions are also available in other formats.

General description

These easy-to-see wall clocks have an analogue face with a black surround, a white face and large black numbers. The hour and minute hands are black and the second hand is red.

CC23 - Large Clock is 35cm diameter (13.78”) approximately.

CC33 - Small Clock is 30cm diameter (11.45”) approximately.

Getting started

Inserting the battery into the large clock – CC23

Turn the clock over and on the back you will feel a raised bottle-shape surround with a thin neck at the tip. Within this area is a raised square shape – this is the battery compartment. Remove the whole cover from this square area to expose the battery compartment and the time set dial. The clock uses one AA battery and this should be inserted into the bottom section of this area, with the negative (flat) terminal positioned to the left into the battery holder.

Inserting the battery into the small clock - CC33

Turn the clock over and on the back you will feel three raised round shapes situated in a triangle. In between these round shapes is a raised square shape – this is the battery compartment. Remove the whole cover from this square area to expose the battery compartment and the time set dial. The clock uses one AA battery and this should be inserted into the bottom section of this area, with the negative (flat) terminal positioned to the left into the battery holder.

Setting the time

After inserting the battery into the clock turn the time set dial, located just above and to the left of the battery. Turn the dial anti-clockwise to move the clock hands clockwise and vice-versa. Once you have set the correct time, replace the square plastic battery cover over the battery compartment and time set dial.

Wall mount

Both clocks are designed to be mounted on a wall. On the back of the large clock, at the tip of the raised bottle-shape surround is the wall mount catch, which should sit over the screw fixed into your wall.

On the small clock, the wall mount catch is the large round protrusion sitting directly above the square-shaped battery compartment. Effectively, this is the tip of the triangle of the three raised round parts surrounding the battery compartment.

Battery replacement

When the clock stops working normally please replace the battery. It is recommended that you use an Alkaline AA battery with these clocks. Always dispose of old batteries safely.

A replacement battery can be purchased from RNIB under product code CP03.

Please note: RNIB does not guarantee batteries.

How to contact RNIB

Phone number: 0303 123 9999

Textphone: 0845 758 5691

Postal address: RNIB, PO Box 173, Peterborough PE2 6WS, U.K.

Email:

Web address: www.rnib.org.uk

Email for international customers:

Terms and conditions of sale

This product is guaranteed from manufacturing faults for 12 months from the date of purchase. If you have any issues with the product and you did not purchase directly from RNIB then please contact your retailer in the first instance.

For all returns and repairs contact RNIB first to get a returns authorisation number to help us deal efficiently with your product return.

You can request full terms and conditions from RNIB or view them online.

Registered Charity No. 226227

This product is CE marked and fully complies with all applicable EU legislation.

At the end of the product’s life you can return it to the supplier or manufacturer for free of charge disposal. This is to comply with ‘The Waste Electrical and Electronic Equipment Directive’ (WEEE).

Date: February 2014

© RNIB

rnib.org.uk