Note: References Are Numbered Within Each Section of the Proposal, As Shown

Wagoner, Matlock, SchrothAHSS – REFERENCESPage 1

REFERENCES

Note: References are numbered within each section of the proposal, as shown.

REFERENCES FROM PROJECT SUMMARY SECTION

1.Robert H. Wagoner: Advanced High-Strength Steels: Fundamental Research Issues, National Science Foundation, Department of Energy, Auto-Steel Partnership, Arlington, VA, October 22-23, 2006.

REFERENCES FROM PRIOR NSF SUPPORTSECTION

References for DMR 0139045 (Wagoner and Barlat)

1.J. Wang, R.H. Wagoner, A Practical Large-Strain Solid Finite Element for Sheet Forming. 2005, Int. J. Numer. Meth. Eng. 63, pp. 473-501.

2.Jue Wang and R.H. Wagoner: A New Hexahedral Solid Element for 3D FEM Simulation of Sheet Metal Forming, Proc. of NUMIFORM 2004, Materials Processing and Design, eds. S. Ghosh, J. M. Casto and J.K. Lee, Columbus, OH, USA, June 2004, pp. 2181-2186.

3.Chung-Souk Han, Frédéric Barlat and R. H. Wagoner On precipitate induced hardening in crystal plasticity: Theory, Int. J. of Plasticity, 2004, Vol. 20, Issue 3, pp. 477-494.

4.C.-S. Han, R.H. Wagoner, Frédéric Barlat: On Precipitate Induced Hardening in Crystal Plasticity: Algorithms and Simulations, Int. J. of Plasticity, 2004, Vol. 20, Issue 8-9, pp. 1441-1461.

5.C.-S. Han, K. Chung, R. H. Wagoner, S.-I. Oh: A Multiplicative Finite Elasto-Plastic Formulation with Anisotropic Yield Functions, Int. J. of Plasticity, 2003, Vol. 19, pp. 197-211.

6.Chung-Souk Han, Myoung-Gyu Lee, Kwansoo Chung, R. H. Wagoner: Integration Algorithms for Planar Anisotropic Shells with Isotropic and Kinematic Hardening at Finite Strains, Commun. Numer. Meth. Engng, 2003, Vol 19, pp. 473-490.

7.Yangwook Choi, Ph.D. Dissertation, Modeling Evolution of Anisotropy and Hardening for Sheet Metals, Summer 2003. (Mechanical Engineering) (Co-advised by J. K. Lee and M. Walter)

8.Yangwook Choi, Chung-Souk Han, June K. Lee, Robert H. Wagoner:Modeling multi-axial deformation of planar anisotropic elasto-plastic material, Part I: Theory, Int. J. of Plasticity, 2006, vol. 22(9), pp. 1745-1764.

9.Yangwook Choi, Chung-Souk Han, June K. Lee, Robert H. Wagoner:Modeling multi-axial deformation of planar anisotropic elasto-plastic material, Part II: Applications, Int. J. of Plasticity, 2006, vol. 22(9), pp. 1765-1783.

10.J. F. Wang, W. D. Carden, R. H. Wagoner, D. K. Matlock and F. Barlat: Creep and Anelasticity in the Springback of Aluminum, Int. J. of Plasticity, 2004, Vol. 20, Issue 12, pp. 2209-2232.

11.J. F. Wang, R. H. Wagoner, D. K. Matlock and F. Barlat: Draw-Bend Springback, Int. J. Solids and Structures, 2005, 42(5-6), pp. 1287-1307.

12.J.F. Wang, R.H. Wagoner and D.K. Matlock: Effect of Anticlastic Curvature on Springback of Aluminum Sheets after the Draw-Bend Test, Proc. of NUMIFORM 2004, Materials Processing and Design, eds. S. Ghosh, J. M. Casto and J.K. Lee, Columbus, OH, USA, June 2004, pp. 820-825. (ISBN 0-7354-0189-6)

13.Jianfeng Wang, Robert H. Wagoner, and David K. Matlock: Creep Following Springback, Proc. of Plasticity 2003, Dislocations, Plasticity and Metal Forming, ed. A. S. Khan, 2003, pp. 211-213. (ISBN 0 9659463-4-7)

14.Jianfeng Wang, Robert H. Wagoner: Mechanisms of Time-Dependent Springback, Dislocations, Plasticity, Damage and Metal Formning: Material Response and Multiscale Modeling, Plasticity 2005 (CD-ROM), Neat Press, Baltimore, Maryland.

15.R. H. Wagoner, M. Li, J. F. Wang: Sheet Springback: Prediction and Design, 8th Int. ESAFORM Conf. Mater. Form., ed. D. Banabic, Cluj-Napoca, Romania, April 2005, pp. 481-484.

16.Jianfeng Wang, Ph.D. Dissertation, Principles of the Draw-Bend Springback Test, Winter 2004.

17.J. F. Wang, R. H. Wagoner, D. K. Matlock and F. Barlat: Simulation of the Draw-Bend Springback for Aluminum Sheets, Int. J. of Plasticity (submitted 4/11/04).

18.R. H. Wagoner, J. F. Wang and M. Li: "Springback," Chapter in ASM Metals Handbook on Forming and Forging (Vol. 14), ASM, Metals Park, OH, 2004, in press.

19.J. F. Wang, R. H. Wagoner, D. K. Matlock: Time-Dependent Springback of Aluminum, PLASTICITY 2003, Quebec, Canada, July 8, 2003 [invited keynote lecture].

20.Wei Gan, Ph.D. Dissertation, Precipitation and Strengthening of Al-Ge-Si Alloys, Fall 2005.

21.W. Gan, K. Okamoto, S. Hirano, K. Chung, C. Kim, R. H. Wagoner: Properties of Friction Stir-Welded Aluminum Alloys 6111 and 5083, J. Eng. Mater. Technol. – Trans. ASME, submitted for publication.

22.R. A. Lingbeek, W. Gan, R. H. Wagoner, V. T. Meinders, J. Weiher: Theoretical Background of the Displacement Adjustment and Springforward Algorithms for Springback Compensation, Int. J. Mach. Tool Mfg., submitted for publication.

23.W. Gan, P. H. Zhang, R. H. Wagoner and G. S. Daehn: The Effect of Load Redistribution in Transient Plastic Flow, Met. Mater. Trans. A, 2006, 37A, pp. 2097-2106.

24.W. Gan, P. H. Zhang, R. H. Wagoner and G. S. Daehn: Transient Plastic Flow at Nominally Fixed Structure due to Load Redistribution, Zeit Metall., 20005, 96(6), pp. 572-577.

25.Min Li: Ph.D. Dissertation, Continuum Modeling on Hardening Evolution in AZ31B Mg Sheets, Winter 2006.

26.R. H. Wagoner, M. Li: Advances in Springback, Proc. of NUMISHEET 2005, eds. L.M. Smith, F. Pourboghrat, J.-W. Yoon and T.B. Stoughton, Detroit, MI, USA, 2005, CP778 Vol. A, pp. 209-214.

27.R. H. Wagoner, Min Li: Simulation of Springback: Through-Thickness Integration, Int. J. Plasticity, in press.

28.X. Y. Lou, M. Li, R. K. Boger, S. R. Agnew, R. H. Wagoner: Hardening Evolution of AZ31B Mg Sheet, Int. J. Plasticity, 2007, vol. 23 (1), pp. 44-86.

29.R. H. Wagoner, X. Y. Lou , M. Li , and S. R. Agnew: Forming Behavior of Magnesium Sheet, J. Mat. Proc. Technol., 2006, vol 177(1-3), pp. 483-485.

30.Richard K. Boger, Ph.D. Dissertation, Bauschinger Effect and Its Continuum Representation in 6013 and 2524 Aluminum Alloys, Winter 2006.

31.R. K. Boger, R.H. Wagoner, F. Barlat, M.-G. Lee and K. Chung: Continuous, Large Strain, Tension/Compression Testing of Sheet Material, Int. J. of Plasticity, 2005, Vol. 21, Issue 12, pp. 2319-2343.

32.D. Kim, M-G Lee, C. Kim, M.L. Wenner, R.H. Wagoner, F. Barlat, K. Chung, J.R. Youn, T.J. Kang: Measurements of Anisotropic Yielding, Bauschinger and Transient Behaviors of Automotive Dual-Phase Steels, Met. Mat. Int., 2003, 6, pp. 561-570.

33.Myoung-Gyu Lee, Daeyong Kim, Chongmin Kim, Michael L. Wenner, Robert H. Wagoner, Kwansoo Chung: Spring-back Evaluation of Automotive Sheets Based on Combined Isotropic-Kinematic Hardening Laws and Non-Quadratic Anisotropic Yield Functions, Proc. of Plasticity 2003, Dislocations, Plasticity and Metal Forming, ed. A. S. Khan, 2003, pp. 391-393. (ISBN 0 9659463-4-7)

34.Myoung-Gyu Lee, Daeyong Kim, Chongmin Kim, Michael L. Wenner, Robert H. Wagoner, Kwansoo Chung: Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions Part II: characterization of material properties, Int. J. of Plasticity, 2005, Vol. 21, Issue 8-9, pp. 883-914.

35.R.H. Wagoner: Sheet Springback, Chapter 42, pp. 777-794, in Continuum Scale Simulation of Engineering Materials, Fundamentals - Microstructures - Process Applications, eds. D. Raabe, F. Roters, F. Barlat and L.-Q. Chen, 2004. ISBN 3-527-30760-5 - Wiley-VCH, Weinheim.

36.R. H. Wagoner: Sheet Springback: Prediction and Design, Oak Ridge National Laboratory, Metals and Ceramics Division, August 4, 2003. [invited]

37.R. H. Wagoner: Creep and Anelasticity in the Springback of Aluminum, Plasticity 2005, Kauai, Hawaii, January 5, 2005. [invited]

38.R. H. Wagoner: Sheet Springback: Draw-Bend Testing and New Directions, Posco Steel Corporation, Kwangyang, Korea, September 9, 2005. [invited]

39.R. H. Wagoner: Advances in Understanding Springback, NUMISHEET 2005, Detroit, Michigan, August 18, 2005. [distinguished lecture]

40.R. H. Wagoner: Sheet Springback, MS&T 2005, Pittsburgh, Pennsylvania, September 27, 2005. [invited keynote lecture]

References for DMR 0303510 (Speer and Matlock)

1.J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, and G. Krauss: Quenching and Partitioning: A Fundamentally New Process to Create High Strength TRIP Sheet Microstructures, Austenite Formation and Decomposition, ISS/TMS, 2003, pp. 505-522.

2.A.M. Streicher, J.G. Speer, D.K. Matlock, and B.C. DeCooman: Quenching and Partitioning Response of a Si-Added TRIP Sheet Steel, International Conference on Advanced High-Strength Sheet Steels for Automotive Applications Proceedings, AIST, Warrendale, PA, 2004, pp. 51-62.

3.John G. Speer, Fernando C. Rizzo, David K. Matlock, and David V. Edmonds: The ‘Quenching and Partitioning’ Process: Background and Recent Progress, Proceedings of the 59th Annual ABM Congress, July 19-22, 2004, São Paulo – Brazil, ABM, 2004, pp.4824-4836. Also published in Materials Research, Vol. 8, No. 4, 2005, pp. 417-423.

4. F.L.H. Gerdemann, J.G. Speer, and D.K. Matlock: Microstructure and Hardness of Steel Grade 9260 Heat-Treated by the Quenching and Partitioning (Q&P) Process, Proceedings of Materials Science and Technology 2004, TMS/AIST, 2004, pp. 439-449.

5. J.G. Speer, D.K. Matlock, B.C. DeCooman, and J.G. Schroth: Comments on ‘On the Definitions of Paraequilibrium and Orthoequilibrium, Scripta Materialia, Vol. 52, 2005, pp. 83-85.

6.J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Partitioning of Carbon from Supersaturated Plates of Ferrite, with Application to Steel Processing and Bainite Transformation Fundamentals, Current Opinion in Solid State and Materials Science, Vol. 8, 2004, pp. 219-237.

7.F. Rizzo, D Edmonds, K. He, J. Speer, D. Matlock and A.M. Streicher: Carbon Enrichment of Austenite and Carbide Precipitation During the Quenching and Partitioning (Q&P) Process, Solid-to-Solid Phase Transformations in Inorganic Materials 2005 – Volume 1: Diffusional Transformations, ed. J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, TMS, 2005, pp. 535-544.

8.A. Clarke, J.G. Speer, D.K. Matlock, F.C. Rizzo, D.V. Edmonds, and K. He: Microstructure and Carbon Partitioning in a 0.19%C-1.59%Mn-1.63%Si TRIP Sheet Steel Subjected to Quenching and Partitioning (Q&P), Solid-to-Solid Phase Transformations in Inorganic Materials 2005 – Volume 2: Displacive Transformations • Fundamentals of Phase Transformations • Experimental Approaches to the Study of Phase Transformations • Computer Approaches to Simulation of Phase Transformations • Phase Transformations in Novel Systems or Special Materials, ed. J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, TMS, 2005, pp.99-108.

9.David V. Edmonds, Kejian He, Fernando C. Rizzo, Amy Clarke, David K. Matlock, and John G. Speer: Microstructural Features of a New Martensitic Steel Heat Treatment: Quenching and Partitioning, Super-High Strength Steels, Rome, Italy, Associazione Italiana di Metallurgia (AIM) and Centro Sviluppo Materiali (CSM), CD-ROM, (ISBN 88-85298-56-7), 20 pages, 2005.

10.D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock and J.G. Speer: Quenching and Partitioning Martensite – A Novel Steel Heat Treatment, Materials Science and Engineering A, Vols. 438-440, 2006, pp. 25-34.

11.M. Milititsky, J.G. Speer, N. DeWispelaere, and N. Akdut, B.C. DeCooman: Room Temperature Aging of Manganese Alloyed High Nitrogen Duplex Stainless Steels, Metallurgical Transactions A, Vol. 37A, 2006, 2117-2123.

12.A.J. Shutts, J.G. Speer, D.K. Matlock, D.V. Edmonds, F. Rizzo, and E.B. Damm: Q&P of High Carbon Bar Steel, Proceedings International Conference on New Developments in Long and Forged Products: Metallurgy and Applications, ed. E.B. Damm, C.V. Darragh, and J.G. Speer, AIST, Warrendale, PA, 2006, pp. 191-202.

13.D.K. Matlock and J.G. Speer: Design Considerations for the Next Generation of Advanced High Strength Sheet Steels, Proceedings of the The 3rd International Conference on Structural Steels, ed. by H.C. Lee, The Korean Institute of Metals and Materials, Seoul, Korea, 2006, pp. 774-781.

14.B.C. De Cooman and J.G. Speer: Microstructure-Properties Relationships in Quench and Partition (Q&P) Steel: Implications for Automotive Anti-Intrusion Applications, Proceedings of the The 3rd International Conference on Structural Steels, ed. by H.C. Lee, The Korean Institute of Metals and Materials, Seoul, Korea, 2006, pp. 798-805.

15.B.C. De Cooman and J.G. Speer: Quench and Partitioning Steel: a New AHSS Concept for Automotive Anti-Intrusion Applications, Steel Research International, Vol. 77, No. 9-10, 2006, pp.628-634.

16.E. Demoor, S. Lacroix, L. Samek, J. Penning, and J.G. Speer: Dilatometric Study of the Quench and Partitioning Process, Proceedings of the The 3rd International Conference on Structural Steels, ed. by H.C. Lee, The Korean Institute of Metals and Materials, Seoul, Korea, 2006, pp. 873-878.

17.John G. Speer, David K. Matlock and George Krauss: Recent Developments in the Physical Metallurgy of Ferrous Long Products, Transactions of the Indian Institute of Metals, Vol.59, No.5, October 2006, pp.749-767.

18.F. Rizzo, A.R. Martins, J.G. Speer, D.K. Matlock, A. Clarke, and B. DeCooman: Quenching and Partitioning of Ni-Added High Strength Steels, Materials Science Forum, vols. 539-543, 2007, pp. 4476-4481.

19. D.V. Edmonds, K. He, M.K. Miller, F.C. Rizzo, A. Clarke, D.K. Matlock, and J.G. Speer: Microstructural Features of ‘Quenching and Partitioning’: A New Martensitic Steel Heat Treatment, Materials Science Forum, Vols. 539-543, 2007, pp.4819-4825.

20.J.G. Speer, R.E. Hackenberg, B.C. DeCooman, and D.K. Matlock: Influence of Interface Migration During Annealing of Martensite/Austenite Mixtures, Phil. Mag. Letters, 2007 (in press).

21.B.C. De Cooman and J.G. Speer: AHSS for Automotive Anti-Intrusion Applications: Quench and Partitioning Steel, Proceedings of the 5th International Strategy Conference, World Automotive Steel Assembly 2006 Global Steel Requirements Specifications 2015 for the Automotive Industry, July 4-5, 2006, Berlin, Germany, 9 pp. (in press).

22.K. He, D.V. Edmonds, J.G. Speer, D.K. Matlock, A. Clarke and F.C. Rizzo, TEM Study of the Microstructures of Quenched and Partitioned (Q&P) Steels, 16th International Microscopy Congress ICM16 in Sapporo, Japan, Sept 3-8, 2006 (in review).

23.A. Clarke: Carbon Partitioning from Austenite from Martensite in a Si-Containing High Strength Sheet Steel, Ph.D. Thesis, Colorado School of Mines, 2006.

24.A,J. Shutts: Rolling Contact Fatigue Testing of 9260 Steel Processed by Quenching and Partitioning, M.S. Thesis, Colorado School of Mines, 2006.

25.J.G. Speer and D.K. Matlock: Application of the Quenching and Partitioning (Q&P) Process to Advanced High Strength Steel Steels, POSCO Technical Research Laboratories, Kwangyang-shi, South Korea, June 3, 2003 [invited].

26.J.G. Speer and D.K. Matlock: Q&P Processing of Steels”, with J.G. Speer, Korea Institute of Machinery & Materials, Taejon, Korea, June 4, 2003 [invited].

27.M.F. Gallagher, J.G. Speer, and D.K. Matlock: Effect of Annealing Temperature on Austenite Decomposition in a Si-Alloyed TRIP Steel, Symposium on Austenite Decomposition and Stability, ISS/TMS Fall Meeting, Chicago, IL, November 12, 2003.

28.J.G. Speer, D.K. Matlock, A.M. Streicher, F. Rizzo, and G. Krauss: Quenching and Partitioning: A Fundamentally New Process to Create High Strength TRIP Sheet Microstructures, Symposium on Austenite Decomposition and Stability, ISS/TMS Fall Meeting, Chicago, IL, November 12, 2003.

29.A.M. Streicher, J.G. Speer, D.K. Matlock, and B.C. De Cooman: Quenching and Partitioning Response of a Si-Added TRIP Sheet Steel, International Conference on Advanced High Strength Sheet Steels for Automotive Applications, Winter Park, CO, June 7, 2004.

30.J.G. Speer and D.K. Matlock: Q&P Processing Response of Sheet Steels, Usiminas Steel, Ipatinga, Minas Gerais, Brazil, July 23, 2004, [invited].

31.F.L.H. Gerdemann, J.G. Speer, and D.K. Matlock: Microstructure and Hardness of Steel Grade 9260 Heat-Treated by the Quenching and Partitioning (Q&P) Process, Materials Science & Technology 2004 Conference, AIST and TMS, New Orleans, LA, September 27, 2004.

32.J.G. Speer and D.K. Matlock, Quenching and Partitioning Response of a Si-Added TRIP Sheet Steel, Severstal NA, Dearborn, MI, December 8, 2004, [invited].

33.J.G. Speer and D.K. Matlock: The Quenching and Partitioning Process - Background and Recent Progress, Los Alamos National Laboratory, Los Alamos, NM, December 21, 2004, [invited].

34.D.K. Matlock and J.G. Speer: The Quenching and Partitioning (Q&P) Process: Background and Recent Progress, Posco, Gwangyang, Korea, February 14, 2005, [invited].

34.J.G. Speer, F.L. Gerdemann, and D.K. Matlock: Quenching and Partitioning Response of 9260 Bar Steel, Ascometal CREAS, Hogandange, France, March 7, 2005, [invited].

35.J.G. Speer and D.K. Matlock: “The Quenching and Partitioning Process: Background and Recent Progress” VoestAlpine, Linz, Austria, May 4, 2005, [invited].

36.A. Streicher, J.G. Speer, F. Rizzo, D. Edmonds, and D.K. Matlock: Microstructure and Carbon Partitioning in a 0.19%C-1.59%Mn-1.63%Si TRIP Sheet Steel Subjected to Quenching and Partitioning, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Phoenix, AZ, May 30, 2005.

37.D.K. Matlock and J.G. Speer: The Quenching and Partitioning Process: Background and Recent Progress, National Taiwan University, Institute of Material Science & Engineering, Taipei, Taiwan, July 7, 2005, [invited].

38.D.K. Matlock and J.G. Speer: The Quenching and Partitioning Process: Background and Recent Progress, National Tsing Hua University, Department of Materials Science and Engineering, Hsinchu, Taiwan, July 11, 2005, [invited].

39.A.J. Shutts, J.G. Speer, and D.K. Matlock: Quenching and Partitioning of High Carbon Bar Steel, AIST International Conference on New Developments in Long and Forged Products, Winter Park, CO, June 7, 2006.

40.J.G. Speer and B.DeCooman: Microstructure-Properties Relationships in Quench and Partition (Q&P) Steel: Implications for Automotive Anti-Intrusion Applications, 3rd International Conference on Advanced Structural Steels (ICASS 2006) in Gyeongju, Korea and presented or co-authored the following papers, August 21, 2006 [keynote].

References for INTRODUCTION SECTION

1.Third Generation Advanced High Strength Steel (AHSS), Research and Development Solicitation, AISI, Washington, DC, 2006.

2.R.H. Wagoner: Advanced High-Strength Steels: Fundamental Research Issues, Proceedings of NSF Workshop, Arlington, VA, October 22-23, 2006

References forPROCESS DEVELOPMENT – THRUST 1 SECTION

1.USCAR (Big 3 Automaker Consortium) estimate provided by Dr. M. L. Wenner, General Motors R&D Center, Warren, Michigan.

2.R. H. Wagoner, W. D. Carden, W. P. Carden, and D. K. Matlock: Springback after Drawing and Bending of Metal Sheets, Proc. IPMM '97 - Intelligent Processing and Manufacturing of Materials, eds. T.Chandra, S.R. Leclair, J.A. Meech, B. Verma, M. Smith and B. Balachandran, University of Wollongong, 1997, vol. 1 (Intelligent Systems Applications), pp. 1-10.

3.F. F. Damborg, R. H. Wagoner, J. Danckert and D. K. Matlock: Stretch-Bend Formability, Proc. MP2M-Center Seminar, Danish Technical University, pp. 9.1-9.7, Publ. No. MM97.81, 1997.

4.W. D. Carden, L. M. Geng, D. K. Matlock and R. H. Wagoner: Measurement of Springback, Int. J. Mech. Sci., 2002, Vol. 44(1), pp. 79- 101.

5.J. F. Wang, R. H. Wagoner, D. K. Matlock and F. Barlat: Draw-Bend Springback, Int. J. Solids and Structures, 2005, 42(5-6), pp. 1287-1307.

6.Kaiping Li and R. H. Wagoner: Simulation of Springback, Simulation of Materials Processing, eds. J. Huetink and F. P. T. Baaijens, A. A. Balkema, Rotterdam, 1998, pp. 21-32.

7.K. P. Li, L. M. Geng, and R. H. Wagoner: Simulation of Springback with the Draw/Bend Test, IPMM '99, Vol. 1, eds. J. A. Meech, M. M. Veiga, M. H. Smith, S. R. LeClair, IEEE, Vancouver, BC, Canada, ISBN 0-7803-5489-3.

8.K.P. Li , W.P. Carden, and R.H. Wagoner: Simulation of Springback, Int. J. Mech. Sci, 2002, Vol. 44(1), pp. 103-122.

9.R. H. Wagoner and M. Li: Simulation of Springback: Through-Thickness Integration, Int. J. Plasticity, 2007, Vol. 23, Issue 3, pp. 345-360.

10.R. H. Wagoner, Lumin Geng, Vijay Balakrishnan: Springback Simulation with Non-Isotropic Hardening, Proc. 3rd ESAFORM Conference on Material Forming, ed. H.-G. Fritz, Inst. Kunststofftechnologie, University of Stuttgart, 2000, pp. VII-3 - VII-6.

11.Lumin Geng and R. H. Wagoner: Role of Plastic Anisotropy and Its Evolution on Springback, Int. J. Mech. Sci., 2002, Vol. 44(1), pp. 123-148.

12.Richard K. Boger, Bauschinger Effect and Its Continuum Representation in 6013 and 2524 Aluminum Alloys, Ph.D Dissertation, The Ohio State University, Winter, 2006.

13.R.K. Boger, R.H. Wagoner, F. Barlat, M.-G. Lee and K. Chung: Continuous, Large Strain, Tension/Compression Testing of Sheet Material, Int. J. of Plasticity , 2005, Vol. 21, Issue 12, pp. 2319-2343.

14.Armstrong PJ., Frederick CO. A mathematical representation of the multiaxial Baushcinger Effect, C. E. G. B. Report RD/B/N 731, 1966.

15.Chaboche JL. On some modifications of kinematic hardening to improve the description of ratchetting effects, International Journal of Plasticity, 1991;7: 661.

16.Chaboche JL., Rousselier G. On the plastic and viscoplastic constitutive equations, parts I and II, J. Press. Vessel tech., 1983;105-153.

17.Chaboche JL., Nouailhas D. Constitutive modeling of ratchetting effects - Part I: experiemtnal Facts, ASME J. Engng. Mat. Tech., 1989;111: 384.

18.Hodge PG. A new method of analyzing stresses and strains in work hardening plastic solids, J. Appl. Mech., 1857;24: 482-483.

19.Myoung-Gyu Lee, Daeyong Kim, Chongmin Kim, Michael L. Wenner, Robert H. Wagoner, Kwansoo Chung: Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions Part II: characterization of material properties, Int. J. of Plasticity, 2005, Vol. 21, Issue 8-9, pp. 883-914.

20.Myoung-Gyu Lee, Daeyong Kim, Kwansoo Chung, R. H. Wagoner, “Springback Prediction Based on Two-Surface Model,” ,Int. J. Plasticity, October, 2006 (in press)

21.Hill R. Theory of yielding and plastic flow of anisotropic metals, Proc. R. Soc., London, 1948;A193:281.

22.Barlat F., Lian, J., Plastic behavior and stretchability of sheet metals, Part I: A yield function for orthotropic sheets under plane stress conditions. Int. J. Plast.. 1989;5:51-66.

23.Barlat F., Maeda Y., Chung K., Yanagawa M., Brem JC, Hayashida, Y., Legfe DJ. Matsui SJ., Murtha SJ. Hattori, S., Becker, R.C and Makosey, S., Yield function development for aluminum alloy sheets. J. Mech. Phys. Sol., 1997:45:11/12:1727-1763.

24.J. F. Wang, W. D. Carden, R. H. Wagoner, D. K. Matlock and F. Barlat: Creep and Anelasticity in the Springback of Aluminum, Int. J. of Plasticity, 2004, Vol. 20, Issue 12, pp. 2209-2232.

25.M. S. Walp, A. Wurm, J. F. Siekirk III, A. K. Desai: ?Shear Fracture
in Advanced High Strength Steels?, SAE Technical Publication
#2006-01-1433, SAE Warrendale, PA, 2006.

26.Damborg F.F., Wagoner R. H., Nielsen K. B., and Danckert J., Application of Ductile Fracture Criteria to Bending under Tension, in Proceedings of the 20th Biennal Congress, IDDRG, Sheet Metal Forming Beyond 2000, Genval, Brussels, Belgium, June 17-19th, 1998

27.W. Tong, H. Tao, X. Jiang, N. Zhang, M. Marya, L. Hector, and X. Gayden, “Deformation and Fracture of Miniature Tensile Bars with Resistance Spot Weld Microstructures,” Metallurgical and Materials Transactions A, Vol. 36A, 2005, pp.2651-2669.

28.T. Hong, W. Tong, N. Zhang, L. Hector, “Time-Resolved Strain Measurements of Portevin-LeChatelier Bands in Aluminum Using a High Speed Digital Camera, Scripta Mat., Vol. 53, 2005, pp.87-92