Submission text
Gilgen STW-2 automatic sliding wall system
Gilgen STW-2 automatic sliding wall system
Gilgen STW-2 automatic sliding wall system
Elegant looks thanks to streamlined dimensions and a carefully designed profile.
Each door leaf with individual position adjustment has an obstacle detection system, which stops
the entire system if there is a person or object inside its operating area.
Each door leaf has a built-in drive and control module.
Drive and control modules with twin-roller travelling assemblies and lateral guide rollers.
The integrated bus system ensures safe and reliable control of the system.
Total length of the wall (including parking space):…….. mm
Clear width:…….. mm
Clear height:…….. mm
Room height:…….. mm
Number of door leaves:…….. units (incl. closing or pivot leaf)
Aluminium double track rail
The toothed belts and conductor rails are integrated into the aluminium double track rail
( )With fixing angle
( )With substructure
Bottom guideway
Aluminium guide rail
( )With substructure
Door leaf and fixed panels
( )Glass sliding door leaf
Automatic mechanism concealed in upper horizontal profile made of aluminium.
Spring-mounted guides in the lower horizontal profile made of aluminium.
Lateral centring parts for the next door leaf.
Upper and lower glazing of the horizontal clamping profiles made of aluminium (without visible screw fixings)
Type of glass: ……………. (tempered safety glass ESG or laminated safety glass VSG) / glass thickness: ……….(10 or 12 mm)
( )Glass closing door leaf
Similar design to glass sliding door leaf.
Can be used for individual access (e.g. staff entrance)
With built-in, electrically operated floor locking.
With manual unlocking feature (using round or profile cylinder)
for when the power is off. Cylinders supplied by customer
( )Fixed glass panel (in area of parking space)
Similar design to glass sliding door leaf. Permanently mounted.
( )Fixed panel supplied by customer (in area of parking space)
( )Automatic glass pivot leaf
Similar design to glass sliding door leaf. For access and barrier use.
With vertical profile at the side and top and bottom pivot bearings.
With built-in, electrically operated floor locking.
With manual unlocking feature (using round or profile cylinder) for when the power is off. Cylinders supplied by customer
( )Sliding door leaf with PSX profile system
All-round frame made of aluminium profiles.
Automatic mechanism concealed in upper horizontal profile made of aluminium.
Spring-mounted guides in the lower horizontal profile made of aluminium.
Lateral centring parts for the next door leaf.
Rubber seals between the individual door leaves prevent draughts.
Dry glazing with rubber seals for the fast and simple replacement, when required, of glass or aluminium profiles.
Glass thickness selectable from 6 mm to 24 mm.
Type of glass: ………………. / glass thickness: ………. (6 – 24 mm)
( )Closing door leaf with PSX profile system
Similar design to PSX sliding door leaf.
Can be used for individual access (e.g. staff entrance)
With built-in, electrically operated floor locking.
With manual unlocking feature (using round or profile cylinder) for when the power is off. Cylinders supplied by customer
( )Fixed panel with PSX profile system (in area of parking space)
Similar design to PSX sliding-door leaf. Permanently mounted
( )Fixed panel supplied by customer (in area of parking space)
( )Automatic pivot door with PSX profile system
Similar design to PSX sliding door leaf. For access and barrier use.
With top and bottom pivot bearing.
With built-in, electrically operated floor locking.
With manual unlocking feature (using round or profile cylinder) for when the power is off. Cylinders supplied by customer
Optional items for electrically operated floor locking:
( )Monitoring of the door-leaf position and lock status TUWE (VdS), e.g. for connection to an alarm system.
Surface treatment
( ) Powder-coated in RAL colours: …..
( )Powder-coated in NCS colours: …..
( )Aluminium, natural anodised finish E6/EV1
( )Aluminium, coloured anodised finish. Colour code: …..
Control unit
System control unit
Main control of the entire system, with operating structure and configuration data. The control unit sends commands from the STW-BEDIX to the individual module control units in the door leaves.
4 x programmable control inputs for the connection of external elements.
Connection and control facilities for floor locking and swing door drive unit.
System control unit integrated into steel switch cabinet:
Size 300 x 300 x 210 mm (for 1 – 10 door leaves)
Size 500 x 500 x 210 mm (for 11 – 30 door leaves)
Additional control elements
( )Voltage-free outputs for acknowledgements to, for example, the building management system (via relay PCB)
Operating controls
Permanently installed STW-BEDiX program selector key
For easy selection of the sliding wall system function, and for displaying various items of system information
( )Flush installation (using customer’s flush-type box)
( )Surface installation (with surface-type plastic frame, in white)
Controls for barrier or pivot leaves (for individual entry purposes)
( )Contactless ATC push-button for optimum hygienic operation
( )OPEN push-button, white, from Feller EDIZIOdue
( )OPEN push-button, green-lit, from Feller EDIZIOdue
( )Key-operated OPEN impulse switch