Low current systems Engineer
Jabal Al-Qusor– Amman – Jordan-Middle east
Tel: (+96264611348)
Mobile (+962 799318517)
KSA mobile :- (00966500091853)
Objectives:
Looking forward to have a chance in a company, this can utilize and
Improve my skills in the fields of Low current systems or in instrumentation knowing that. I am a very hard worker, time punctuate anda good team leader & player.
Personal information:
Place of birth:-Amman – Jordan
Date of birth: - 6th of June 1982
Nationality: Jordanian
Marital status: - Married
QUALIFICATIONS And EDUCATION:
BSc in Communication and Electrical Engineering, Jordan University
of science and technology, Irbid, Jordan, 2004
Graduation project: - “cylindrical dielectric resonator antenna “
Other Projects (after Graduation): -
1-"ECG PC Based Monitoring System".
Professional experience:
1-Basic electronics Co.
(Schneider BMS and smart solutions including EIB system(TAC) distributor,Gent by Honeywell distributor, Sanyo Agent, Pelco cctv, access systems)
From 10/2009 up to 1/1/2011
A good company in KSA for low current systems this company is the main supplier for CCTV and Fire Alarm systems in AL-Rajhi Bank, Also installing King Khalid monitoring, Control and SACDA system.
Job Title: - BMS systems and low current sales and presales engineer.
Job Description:-
1-BMS and EIB sales and design engineer especially with BACnet BMS controllers (TAC Andover controllers) and TAC KNX EIB system.
2-Gent fire alarm systems sales and design engineer.
3-Sanyo and Schneider security systems sales and installation engineer specially IP videosurveillance system with Milestone server management software.
4-Designfully intelligent smart solutions.
2-ABUAISHEH ENGINEERING EST (4 years from 9/2004 up to 10/2008)
A good PC Based Data Acquisition, test and measurement, PC
based control, SACDA, aspiration systems( fire tracers) for smoke and
Gas detection (ICAM). Placed in Amman, Jordan.
Job Title: - Instrumentation Engineer
Job Discretion:-
1- Technical Supporter.
2- SCADA systems designer, programmer and supplier.
3- Interface circuits for sensors designer.
4- Very high accuracy fire detection systems installer.
5- Software Programmer for SCADA systems (using visual basic
Programming language).
6- Preparation and submission of training courses in hardware
Interface using VB.net.
7- Preparing tenders for test, measurement, and control devices
(Pico technology, SCADA, R&S).
8- ICAM Fire tracer’s configuration, implementation and installation.
9- Supply and installation of wide range of sensors and transmitters (
flow, pressure, temperature…etc) .
Implemented industrial Projects in Abuaisheh Engineering:-
- Flow despising PC based Control System (SCADA)((Design,
programming and installation) – Sinokrot farms- using Amplicon PCI
cards.
- RO Monitoring system (Hartha-Irbid-Jordan)
- Environmental Monitoring system.
- Farm irrigation monitoring system.(mafraq)
- Test system of JATS aircrafts (Aviation style)
- PC based Test and data Logging labs
- Design and manufacturing of new sensors (Compatible with DrDAQ)
- Flow-up program of votes-year 2007(Database)
- Gas Chromatography interface monitoring software.
- Pressure RTU monitoring system with process indicators.
- Server Room monitoring and alarm system (ZAY)
- Submersible pumps SCADA system (Under implementation).
Student Projects:-
- ECG monitoring system
- Car Control system
- Engine troubleshooting system
- PC Based Smart house
- PC based Library system
- PC Based Medical Doctor
- PC Based Virtual Electronic Circuit lab
- GSM monitoring system
- TDS Monitoring system
- PC Based Gas analyzer system
- PC Based Soil moisture monitoring system and Control.
TRAININGCOURSES:
1-Sales training in Schneider TAC Andover BMS in Schneider main office –KSA.
2-Schneider BMS sales training course.
3-Schneider Pelco CCTV training course.
4-Schneider Pelco Endura system (IP cctv system) sales training course.
5-Gent By Honeywell Fire alarm system sales training course.
6-KNX EIB system Design ( 8 hours by Schneider electric).
7-C-bus EIB system design by Schneider electric.(8 hours by Schneider electric)
8-BMS system design By Schneider electric. (5 Days, 7 hours per day).
9-Technical writing and communication skills, Jordan association,Amman, Jordan, 18 hour, Dr-Tareq Rashed.
10-Electric control, Arabic academy, Amman, Jordan, 20 hours.
11-PIC, 18 Hours,(Albaheth center).
12-Advanced VB.net programming (Abuaisheh Engineering).
13-Siemens S200 series PLC programming and configuration(self
study).
14-DAQfactory SCADA Software (Self study).
15-DAQ for instrumentation and control system (self study).
B-University training course:-
1- Queen Alia Airport, 2 months in FEDs, the training includes the
maintenance of the airport network and televisions.
2- Adel Shehada .CO, 18 days, installing and maintenance of the
elevator systems.
Programming languages:
1- Visual basic 6 (good).
2- Vb.net 2003 (good).
3- VB.net 2005 (good).
4- Vb.net 2008 (good).
5- C#.net (primary)
6- Matlab (good).
7.Mikrobasic PIC controller programming.
8.TAC BMS Controls programming using Cyberstation software.
Design Programs:
1-PCB design using Protel Design Explorer (DXP)(primary).
2-Easy PCB (very good).
Skills:
- IT Skills :-
_ MS-office including viso , MS Access and FrontPage 2003 and 2007
_ AutoCAD 2009.
- Professional membership:
1-Jordan engineers association, Amman, Jordan.
2-International Engineering Consortium (USA).
Languages:
1- Arabic (Mother Tongue).
2- English (Writing: good, reading: good)
References: Available upon request.